Arduino编写的M5GO的WiFi网络通讯工程
主要是用Arduino编写的ESP32的WiFi网络通讯工程,包含很多依赖项,首先是WIFI连接,手机扫描二维码设置m5go连接的wifi,自动重启并连接成功后显示控制二维码,二维码上有三个控件,分别是手动打开,手动关闭和自动模式。之后会有和M5GO的灯光,红外调节。
由于依赖项比较多,所以难度比较大。。。
程序设计思路
主程序
#include <M5Stack.h>
#include <WiFi.h>
#include <ESPmDNS.h>
#include <WiFiClient.h>
#include "WebServer.h"
#include <Preferences.h>
#include <Arduino.h>
#include <IRremoteESP8266.h>
#include <IRsend.h>
#include <Adafruit_NeoPixel.h>
#include <stdio.h>
#include "DHT12.h"
#include <Wire.h> //The DHT12 uses I2C comunication.
#include "Adafruit_Sensor.h"
#include <Adafruit_BMP280.h>
#define RGBPIN 15
#define PIXELNUM 10
Adafruit_NeoPixel pixels = Adafruit_NeoPixel(PIXELNUM, RGBPIN, NEO_GRB + NEO_KHZ800);
const IPAddress apIP(192, 168, 4, 1);
const char* apSSID = "M5STACK_SETUP";
boolean settingMode;
String ssidList;
String wifi_ssid;
String wifi_password;
boolean autoMode;
int autoState;
const uint16_t kIrLed = 26; // ESP8266 GPIO pin to use. Recommended: 4 (D2).
IRsend irsend(kIrLed); // Set the GPIO to be used to sending the message.
uint16_t powerOnData[73] = {9000, 4500, 670, 540, 670, 540, 670, 540,
670, 1600, 670, 540, 670, 540, 670, 540,
670, 540, 670, 1600, 670, 540, 670, 540,
670, 1600, 670, 540, 670, 540, 670, 540,
670, 540, 670, 540, 670, 540, 670, 540,
670, 540, 670, 540, 670, 540, 670, 540,
670, 540, 670, 540, 670, 540, 670, 540,
670, 540, 670, 1600, 670, 540, 670, 1600,
670, 540, 670, 540, 670, 1600, 670, 540, 670};
uint16_t powerOffData[73] = {9000, 4500, 670, 540, 670, 540, 670, 540,
670, 540, 670, 540, 670, 540, 670, 540,
670, 540, 670, 540, 670, 540, 670, 540,
670, 1600, 670, 540, 670, 540, 670, 540,
670, 540, 670, 540, 670, 540, 670, 540,
670, 540, 670, 540, 670, 540, 670, 540,
670, 540, 670, 540, 670, 540, 670, 540,
670, 540, 670, 1600, 670, 540, 670, 1600,
670, 540, 670, 540, 670, 1600, 670, 540, 670};
DHT12 dht12; //Preset scale CELSIUS and ID 0x5c.
Adafruit_BMP280 bme;
// DNSServer dnsServer;
WebServer webServer(80);
// wifi config store
Preferences preferences;
void setup() {
M5.begin();
irsend.begin();
pixels.begin();
Wire.begin();
preferences.begin("wifi-config");
M5.Power.begin();
#if ESP8266
Serial.begin(115200, SERIAL_8N1, SERIAL_TX_ONLY);
#else // ESP8266
Serial.begin(115200, SERIAL_8N1);
#endif // ESP8266
delay(10);
if (restoreConfig()) {
if (checkConnection()) {
settingMode = false;
startWebServer();
return;
}
}
settingMode = true;
autoMode = true;
autoState = 0;
setupMode();
}
int loopCount = 0;
void loop() {
if (!settingMode && loopCount > 5000) {
if(autoMode && bme.begin(0x76)) {
loopCount = 0;
if (autoState != 2 && dht12.readTemperature() > 27) {
irsend.sendRaw(powerOnData, 73, 38);
autoState = 2;
}
if (autoState != 1 && dht12.readTemperature() < 25) {
irsend.sendRaw(powerOffData, 73, 38);
autoState = 1;
}
M5.Lcd.fillRect(0, 120, 160, 100, WHITE);
M5.Lcd.setCursor(40, 120);
M5.Lcd.setTextColor(BLACK);
M5.Lcd.setTextSize(4);
M5.Lcd.printf("%d C\n", (int)(dht12.readTemperature()));
M5.Lcd.setTextSize(2);
M5.Lcd.printf(" \n Auto Mode");
}
else {
M5.Lcd.fillRect(0, 120, 160, 100, WHITE);
}
}
webServer.handleClient();
loopCount += 1;
}
boolean restoreConfig() {
wifi_ssid = preferences.getString("WIFI_SSID");
wifi_password = preferences.getString("WIFI_PASSWD");
/*Serial.print("WIFI-SSID: ");
M5.Lcd.print("WIFI-SSID: ");
Serial.println(wifi_ssid);
M5.Lcd.println(wifi_ssid);
Serial.print("WIFI-PASSWD: ");
M5.Lcd.print("WIFI-PASSWD: ");
Serial.println(wifi_password);
M5.Lcd.println(wifi_password);*/
WiFi.begin(wifi_ssid.c_str(), wifi_password.c_str());
if(wifi_ssid.length() > 0) {
return true;
} else {
return false;
}
}
boolean checkConnection() {
int count = 0;
Serial.print("Waiting for Wi-Fi connection");
M5.Lcd.fillScreen(BLACK);
M5.Lcd.setCursor(50, 100);
M5.Lcd.setTextColor(WHITE);
M5.Lcd.setTextSize(3);
M5.Lcd.printf("Connecting...");
//M5.Lcd.print("Waiting for Wi-Fi connection");
while ( count < 30 ) {
if (WiFi.status() == WL_CONNECTED) {
Serial.println();
//M5.Lcd.println();
Serial.println("Connected!");
//M5.Lcd.println("Connected!");
M5.Lcd.fillScreen(BLACK);
M5.Lcd.setCursor(50, 100);
M5.Lcd.setTextColor(WHITE);
M5.Lcd.setTextSize(3);
M5.Lcd.printf("Connected!");
return true;
}
delay(500);
Serial.print(".");
//M5.Lcd.print(".");
M5.Lcd.fillRect(10, 200, 300, 40, BLACK);
M5.Lcd.fillRect(10 + count * 5, 200, 300 - count * 10, 40, GREEN);
count++;
}
Serial.println("Timed out.");
//M5.Lcd.println("Timed out.");
M5.Lcd.fillScreen(BLACK);
M5.Lcd.setCursor(50, 100);
M5.Lcd.setTextColor(WHITE);
M5.Lcd.setTextSize(3);
M5.Lcd.printf("Timed out.");
return false;
}
void startWebServer() {
if (settingMode) {
Serial.print("Starting Web Server at ");
//M5.Lcd.print("Starting Web Server at ");
Serial.println(WiFi.softAPIP());
//M5.Lcd.println(WiFi.softAPIP());
webServer.on("/settings", []() {
String s = "<h1 style=\"text-align: center\">Wi-Fi Settings</h1><hr>";
s += "<form method=\"get\" action=\"setap\" style=\"text-align: center\"><label>SSID: </label><select name=\"ssid\">";
s += ssidList;
s += "</select><br><br>Password: <input name=\"pass\" length=64 type=\"password\"><input type=\"submit\"></form>";
webServer.send(200, "text/html", makePage("Wi-Fi Settings", s));
});
webServer.on("/setap", []() {
String ssid = urlDecode(webServer.arg("ssid"));
Serial.print("SSID: ");
//M5.Lcd.print("SSID: ");
Serial.println(ssid);
//M5.Lcd.println(ssid);
String pass = urlDecode(webServer.arg("pass"));
Serial.print("Password: ");
//M5.Lcd.print("Password: ");
Serial.println(pass);
//M5.Lcd.println(pass);
Serial.println("Writing SSID to EEPROM...");
//M5.Lcd.println("Writing SSID to EEPROM...");
// Store wifi config
Serial.println("Writing Password to nvr...");
//M5.Lcd.println("Writing Password to nvr...");
preferences.putString("WIFI_SSID", ssid);
preferences.putString("WIFI_PASSWD", pass);
Serial.println("Write nvr done!");
//M5.Lcd.println("Write nvr done!");
String s = "<h1 style=\"text-align: center\">Setup complete!</h1 style=\"text-align: center\"><p style=\"text-align: center\">device will be connected to \"";
s += ssid;
s += "\" after the restart.";
webServer.send(200, "text/html", makePage("Wi-Fi Settings", s));
delay(3000);
ESP.restart();
});
webServer.onNotFound([]() {
String s = "<h1 style=\"text-align: center\">M5GO</h1><p style=\"text-align: center\"><a href=\"/settings\">Wi-Fi Settings</a></p>";
webServer.send(200, "text/html", makePage("M5GO", s));
});
}
else {
Serial.print("Starting Web Server at ");
//M5.Lcd.print("Starting Web Server at ");
Serial.println(WiFi.localIP());
//M5.Lcd.println(WiFi.localIP());
M5.Lcd.fillScreen(WHITE);
M5.Lcd.setCursor(0, 20);
M5.Lcd.setTextColor(BLACK);
M5.Lcd.setTextSize(3);
M5.Lcd.printf(" Enjoy");
M5.Lcd.setTextSize(2);
M5.Lcd.printf("\n\n the Life.");
M5.Lcd.qrcode(WiFi.localIP().toString(), 160, 80, 160, 6);
webServer.on("/", []() {
String s = "<h1 style=\"text-align: center\">Connected!</h1><h3 style=\"text-align: center\"><a href=\"/poweron\">Power On</a></h3><h3 style=\"text-align: center\"><a href=\"/poweroff\">Power Off</a></h3><h3 style=\"text-align: center\"><a href=\"/automode\">Auto Mode</a></h3><p style=\"text-align: center\"><a href=\"/reset\">Reset WiFi</a></p>";
webServer.send(200, "text/html", makePage("M5GO", s));
});
webServer.on("/poweron", []() {
irsend.sendRaw(powerOnData, 73, 38);
for (int i = 0; i < PIXELNUM; i++) {
pixels.setPixelColor(i, pixels.Color(0, 200, 0));
pixels.show();
}
autoMode = false;
autoState = 0;
String s = "<meta http-equiv=\"refresh\" content=\"0;url=http://192.168.137.18/\">";
webServer.send(200, "text/html", makePage("M5GO", s));
});
webServer.on("/poweroff", []() {
irsend.sendRaw(powerOffData, 73, 38);
for (int i = 0; i < PIXELNUM; i++) {
pixels.setPixelColor(i, pixels.Color(0, 0, 0));
pixels.show();
}
autoMode = false;
autoState = 0;
String s = "<meta http-equiv=\"refresh\" content=\"0;url=http://192.168.137.18/\">";
webServer.send(200, "text/html", makePage("M5GO", s));
});
webServer.on("/automode", []() {
for (int i = 0; i < PIXELNUM; i++) {
pixels.setPixelColor(i, pixels.Color(20, 20, 160));
pixels.show();
}
autoMode = true;
String s = "<meta http-equiv=\"refresh\" content=\"1;url=http://192.168.137.18/\">";
webServer.send(200, "text/html", makePage("M5GO", s));
});
webServer.on("/reset", []() {
// reset the wifi config
preferences.remove("WIFI_SSID");
preferences.remove("WIFI_PASSWD");
String s = "<h1 style=\"text-align: center\">Wi-Fi settings was reset.</h1><p style=\"text-align: center\">device will restart.</p>";
webServer.send(200, "text/html", makePage("Reset Wi-Fi Settings", s));
delay(3000);
ESP.restart();
});
}
webServer.begin();
}
void setupMode() {
WiFi.mode(WIFI_MODE_STA);
WiFi.disconnect();
delay(100);
int n = WiFi.scanNetworks();
delay(100);
Serial.println("");
//M5.Lcd.println("");
for (int i = 0; i < n; ++i) {
ssidList += "<option value=\"";
ssidList += WiFi.SSID(i);
ssidList += "\">";
ssidList += WiFi.SSID(i);
ssidList += "</option>";
}
delay(100);
WiFi.softAPConfig(apIP, apIP, IPAddress(255, 255, 255, 0));
WiFi.softAP(apSSID);
WiFi.mode(WIFI_MODE_AP);
// WiFi.softAPConfig(IPAddress local_ip, IPAddress gateway, IPAddress subnet);
// WiFi.softAP(const char* ssid, const char* passphrase = NULL, int channel = 1, int ssid_hidden = 0);
// dnsServer.start(53, "*", apIP);
startWebServer();
Serial.print("Starting Access Point at \"");
//M5.Lcd.print("Starting Access Point at \"");
M5.Lcd.fillScreen(WHITE);
M5.Lcd.setCursor(0, 20);
M5.Lcd.setTextColor(BLACK);
M5.Lcd.setTextSize(2);
M5.Lcd.printf(" Connect\n\n ");
M5.Lcd.setTextSize(3);
M5.Lcd.printf(apSSID);
M5.Lcd.println("");
M5.Lcd.setTextSize(2);
M5.Lcd.printf("\n and Scan \n QRCode");
Serial.print(apSSID);
//M5.Lcd.print(apSSID);
Serial.println("\"");
//M5.Lcd.println("\"");
M5.Lcd.qrcode(apIP.toString(), 160, 80, 160, 6);
}
String makePage(String title, String contents) {
String s = "<!DOCTYPE html><html><head>";
s += "<meta name=\"viewport\" content=\"width=device-width,user-scalable=0\">";
s += "<title>";
s += title;
s += "</title></head><body>";
s += contents;
s += "</body></html>";
return s;
}
String urlDecode(String input) {
String s = input;
s.replace("%20", " ");
s.replace("+", " ");
s.replace("%21", "!");
s.replace("%22", "\"");
s.replace("%23", "#");
s.replace("%24", "$");
s.replace("%25", "%");
s.replace("%26", "&");
s.replace("%27", "\'");
s.replace("%28", "(");
s.replace("%29", ")");
s.replace("%30", "*");
s.replace("%31", "+");
s.replace("%2C", ",");
s.replace("%2E", ".");
s.replace("%2F", "/");
s.replace("%2C", ",");
s.replace("%3A", ":");
s.replace("%3A", ";");
s.replace("%3C", "<");
s.replace("%3D", "=");
s.replace("%3E", ">");
s.replace("%3F", "?");
s.replace("%40", "@");
s.replace("%5B", "[");
s.replace("%5C", "\\");
s.replace("%5D", "]");
s.replace("%5E", "^");
s.replace("%5F", "-");
s.replace("%60", "`");
return s;
}
还有头文件的相关文件;
大家可以到GitHub上下载https://github.com/xiang1578/sleep-helper
或者在CSDN上下载资源;