Publisher: shengteng kneader release date: 2020-3-2
Silicon rubber kneader iwww.rgshengteng.coms the key equipment for producing electrode paste, anode paste, graphitized electrode and various carbon products. It is suitable for mixing tar, bitumen coke, metallurgical coke and anthracite and other materials. The particle size range of the mixed material is 4-15mm.
Each silicon rubber silicone rubber kneader shall pass the inspection of the manufacturer’s inspection department and shall not leave the factory until it is accompanied by a certificate of quality.
Before leaving the factory, each silicon rubber silicone rubber kneading machine must carry out no-load test for 30 min at the rated speed. The product shall meet the following requirements.
-
The machine runs normally and smoothly, without abnormal sound, and the operating device is flexible and reliable.
-
All connecting parts and fasteners shall not be loosened.
-
For products produced in batches, at least two shall be sampled every year and tested in accordance with JB/T9820.3. The results shall meet the requirements of 3.4.
-
When accepting products, the ordering unit shall conduct acceptance inspection according to this standard. If it is not qualified, it shall be resubmitted for acceptance by the manufacturer after repair. In the use of the unit to comply with the manufacturer’s requirements of the mixer operating instructions, from the date of purchase, within one year, due to poor manufacturing quality damage, the manufacturer shall repair, replace and return.
-
The quality of paint coating shall be inspected in accordance with JB/T 5673.
Marking, packaging, transportation and storage
- The product label of each silicone rubber kneader shall be fixed in an obvious position. The label shall comply with the provisions of GB/T 13306.
A) name of the manufacturer;
B) product name and model;
C) spindle speed;
D) productivity;
E) supporting power;
F) machine weight;
G) product manufacturing number;
H) product delivery date.
- Use the red arrow to mark the rotation direction of the rotor at the obvious position of the housing.
3, silicone rubber silicone rubber kneading machine should be packaged out of the factory, packaging should be easy to transport, and ensure that the product is not damaged.
-
Accessories (spare parts and tools) supplied with the products shall be complete.
-
Each product shall be accompanied by the following documents:
A) packing list;
B) product quality inspection certificate;
C) product instructions;
D) user opinion questionnaire