LNMP 部署{ linux + Nginx +Mysql + PHP }及安装论坛

一： 什么是LNMP

LNMP平台就是Linux. Ngnix. MySQL. PHP的组合架构，需要Lnux服务器、MySal 数据库、PHP解析坏境

Ngnix特长:高并发，低资源，处理静态网络访问请求非常强

linux （操作系统）

Linux（i/ˈlɪnəks/ LIN-əks）是一种自由bai和开放源码的类duUNIX 操作系统。该操作系统的内核由林纳斯·托瓦兹在zhi1991年10月5日首次发布，在加dao上用户空间的应用程序之后，成为 Linux 操作系统

Apache

静态处理和动态处理都可以做，更适合做动态处理

Nginx

将动态资源请求交给PHP当中的fpm处理动态请求

PHP

主配置文件：php.ini
Nginx将动态资源分配给FPM或Apache

MySQL安装配置

1·为了与Nginx、PHP环境保持- -致， 此处选择采用源代码编译的方式安装MySQL组件
2、MySQL部署的方法
编译安装MySQL
优化调整
初始化数据库
启动MySQL服务并设置root数据库账号的密码

PHP解析环境的安装

1、配置网页动静分离，解析PHP，有两种方法可以选择
使用PHP的FPM模块
将访问PHP页面的Web请求转交给Apache服务器去处理
2、较新版本的PHP已经自带FPM模块，对PHP解析实例进行管理、优化解析效率
FastCGI将Http Server和动态脚本语言分离开
Nginx专门处理静态请求，转发动态请求
PHP-FPM专[门解析PHP动态请求
单服务器的LNMP架构通常使用FPM方式来解析PHP

配置Nginx支持PHP环境

1、调用本机的php-fpm进程配置方法

建立FPM配置文件php-fpm.conf,修改配置选项
- PID文件、运行用户、服务进程数等
启动php-fpm进程
2、配置Nginx支持PHP解析
在Nginx的配置文件的server{ }配置段中设置将PHP的网页请求转给FPM模块处理
3、PHP页面访问测试

二、LNMP应用部署

本案例在单台服务器上部署LNMP环境
案例架构
Linux+Nginx+MySQL+PHP

1、安装nginx

[root@localhost ~]# cd /opt/
[root@localhost opt]# mkdir LNMP
[root@localhost opt]# cd LNMP/
[root@localhost LNMP]# rz -E //使用xshell直接压缩包到虚拟机
rz waiting to receive.
[root@localhost LNMP]# ls
Discuz_X3.4_SC_UTF8.zip mysql-boost-5.7.20.tar.gz ncurses-5.6.tar.gz nginx-1.12.2.tar.gz php-7.1.10.tar.bz2
1、安装环境依赖包
[root@localhost LNMP]# tar zxvf nginx-1.12.2.tar.gz -C /opt/
[root@localhost LNMP]# cd /opt/nginx-1.12.2/
[root@localhost nginx-1.12.2]# yum -y install gcc
gcc-c++
zlib-devel
pcre pcre-devel //安装编译器和其他工具
2、创建运行用户、组
[root@localhost nginx-1.12.2]# useradd -M -s /sbin/nologin nginx //创建nginx管理用户，不建立宿主目录，禁止登陆到shell环境
[root@localhost nginx-1.12.2]# id nginx
uid=1001(nginx) gid=1001(nginx) 组=1001(nginx)
3、编译安装nginx
[root@localhost nginx-1.12.2]# ./configure
–prefix=/usr/local/nginx
–user=nginx
–group=nginx
–with-http_stub_status_module //安装路径，用户，组，统计模块功能
[root@localhost nginx-1.12.2]# make && make install
4、路径优化
[root@localhost nginx-1.12.2]# ln -s /usr/local/nginx/sbin/nginx /usr/local/sbin/ //创建软链接，便于管理员直接执行nginx命令来调用nginx主程序
[root@localhost nginx-1.12.2]# ls /usr/local/sbin/
nginx
5、检测语法
[root@localhost nginx-1.12.2]# nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
6、启动、停止nginx服务
[root@localhost nginx-1.12.2]# nginx
[root@localhost nginx-1.12.2]# netstat -antp | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 70833/nginx:
用宿主机win10去访问192.168.200.80，成功访问nginx网站
[root@localhost nginx-1.12.2]# netstat -antp | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 70833/nginx: master
[root@localhost nginx-1.12.2]# killall -s HUP nginx //重载nginx命令
[root@localhost nginx-1.12.2]# netstat -antp | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 70833/nginx: master
[root@localhost nginx-1.12.2]# killall -s QUIT nginx //关闭nginx命令
[root@localhost nginx-1.12.2]# netstat -antp | grep nginx
[root@localhost nginx-1.12.2]# nginx
[root@localhost nginx-1.12.2]# netstat -antp | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 70961/nginx: master
[root@localhost nginx-1.12.2]# kill -9 70961 //kill杀死进程但是服务杀不死
[root@localhost nginx-1.12.2]# netstat -antp | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 70962/nginx: worker
[root@localhost nginx-1.12.2]# pkill nginx //pkill直接杀死进程树
[root@localhost nginx-1.12.2]# netstat -antp | grep nginx
7、添加nginx系统服务
[root@localhost nginx-1.12.2]# vim /lib/systemd/system/nginx.service //添加nginx服务给systemctl管理
[Unit]
Description=nginx
After=network.target
[Service]
Type=forking //默认进程模式
PIDFile=/usr/local/nginx/logs/nginx.pid //进程文件
ExecStart=/usr/local/nginx/sbin/nginx //安装目录
ExecReload=/usr/bin/kill -s HUP $MAINPID //重载目录
ExecStop=/usr/bin/kill -s QUIT $MAINPID //停止
PrivateTmp=ture
[Install]
WantedBy=multi-user.target //多用户模式
[root@localhost nginx-1.12.2]# chmod 754 /lib/systemd/system/nginx.service //配置权限
[root@localhost nginx-1.12.2]# systemctl start nginx
Warning: nginx.service changed on disk. Run ‘systemctl daemon-reload’ to reload units. //出现警告
Job for nginx.service failed because the control process exited with error code. See “systemctl status nginx.service” and “journalctl -xe” for details.
[root@localhost nginx-1.12.2]# systemctl daemon-reload //重新加载某个服务的配置文件，如果新安装了一个服务，归属于 systemctl 管理，要是新服务的服务程序配置文件生效，需重新加载。
[root@localhost nginx-1.12.2]# systemctl start nginx //启动服务成功
[root@localhost nginx-1.12.2]# netstat -antp | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 71619/nginx: master

2、安装MYSQL

[root@localhost nginx-1.12.2]# cd /opt/LNMP/
[root@localhost LNMP]# ls
Discuz_X3.4_SC_UTF8.zip ncurses-5.6.tar.gz php-7.1.10.tar.bz2 mysql-boost-5.7.20.tar.gz nginx-1.12.2.tar.gz
[root@localhost LNMP]# tar zxvf mysql-boost-5.7.20.tar.gz -C /opt/
[root@localhost LNMP]# cd /opt/
[root@localhost opt]# useradd -s /sbin/nologin mysql //创建运行用户
[root@localhost opt]# yum -y install ncurses ncurses-devel bison cmake //bison语法识别
[root@localhost opt]# cd /opt/mysql-5.7.20/
[root@localhost mysql-5.7.20]#
cmake
-DCMAKE_INSTALL_PREFIX=/usr/local/mysql
-DMYSQL_UNIX_ADDR=/usr/local/mysql/mysql.sock
-DSYSCONFDIR=/etc
-DSYSTEMD_PID_DIR=/usr/local/mysql
-DDEFAULT_CHARSET=utf8
-DDEFAULT_COLLATION=utf8_general_ci
-DWITH_INNOBASE_STORAGE_ENGINE=1 \ //存储引擎
-DWITH_ARCHIVE_STORAGE_ENGINE=1
-DWITH_BLACKHOLE_STORAGE_ENGINE=1
-DWITH_PERFSCHEMA_STORAGE_ENGINE=1
-DMYSQL_DATADIR=/usr/local/mysql/data \ //数据存储位置
-DWITH_BOOST=boost \ //c++库
-DWITH_SYSTEMD=1 //开启第二进程
[root@localhost mysql-5.7.20]# make
[root@localhost mysql-5.7.20]# make install
[root@localhost mysql-5.7.20]# cd /usr/local/
[root@localhost local]# ll
drwxr-xr-x. 11 root root 151 8月 11 09:57 nginx
[root@localhost local]# chown -R mysql:mysql /usr/local/mysql/ //更改属主属组为mysql
[root@localhost local]# ll
drwxr-xr-x. 11 mysql mysql 197 8月 11 12:18 mysql
[root@localhost local]# cd /etc/
[root@localhost etc]# vim my.cnf
[client]
port=3306
default-character-set=utf8
socket=/usr/local/mysql/mysql.sock
[mysql]
port=3306
default-character-set=utf8
socket=/usr/local/mysql/mysql.sock
[mysqld]
user=mysql
basedir=/usr/local/mysql
datadir=/usr/local/mysql/data
port=3306
character_set_server=utf8
pid-file=/usr/local/mysql/mysqld.pid
socket=/usr/local/mysql/mysql.sock
server-id=1
sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_AUTO_VALUE_ON_ZERO,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,PIPES_AS_CONCAT,ANSI_QUOTES

设置环境变量
[root@localhost etc]# vim /etc/profile
PATH=/usr/local/mysql/bin:/usr/local/mysql/lib:$PATH
export PATH //声明为全局变量
[root@localhost etc]# source /etc/profile //加载环境变量
初始化数据库
[root@localhost etc]# cd /usr/local/mysql/
[root@localhost mysql]# ls
bin COPYING-test include man README share usr
COPYING docs lib mysql-test README-test support-files
[root@localhost mysql]# ls bin/
mysql_install_db
mysqld
[root@localhost mysql]# bin/mysqld --initialize-insecure
–user=mysql
–basedir=/usr/local/mysql
–datadir=/usr/local/mysql/data //初始化数据库
2020-08-11T11:41:37.791663Z 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).
2020-08-11T11:41:38.155226Z 0 [Warning] InnoDB: New log files created, LSN=45790
2020-08-11T11:41:38.210661Z 0 [Warning] InnoDB: Creating foreign key constraint system tables.
2020-08-11T11:41:38.269282Z 0 [Warning] No existing UUID has been found, so we assume that this is the first time that this server has been started. Generating a new UUID: 9dec1b5f-dbc7-11ea-ab28-000c29cd9a36.
2020-08-11T11:41:38.269993Z 0 [Warning] Gtid table is not ready to be used. Table ‘mysql.gtid_executed’ cannot be opened.
2020-08-11T11:41:38.271838Z 1 [Warning] root@localhost is created with an empty password ! Please consider switching off the --initialize-insecure option.
[root@localhost mysql]# cp /usr/lib/systemd/system/mysqld.service /usr/lib/systemd/system
[root@localhost mysql]# systemctl start mysqld
[root@localhost mysql]# netstat -antp | grep mysqld
tcp6 0 0 :::3306 ::😗 LISTEN 95058/mysqld
[root@localhost mysql]# systemctl enable mysqld //设置开机自启
Created symlink from /etc/systemd/system/multi-user.target.wants/mysqld.service to /usr/lib/systemd/system/mysqld.service.
[root@localhost mysql]# mysqladmin -u root -p password “abc123” //设置mysql密码
Enter password: //空密码所以按空格
mysqladmin: [Warning] Using a password on the command line interface can be insecure.
Warning: Since password will be sent to server in plain text, use ssl connection to ensure password safety.
[root@localhost mysql]# mysql -u root -p
Enter password: //输入刚刚设置的密码abc123
mysql> show databases;
±----------------------------+
| Database |
±----------------------------+
| information_schema |
| mysql |
| performance_schema |
| sys |
±----------------------------+
4 rows in set (0.00 sec)
mysql> quit
Bye
[root@localhost mysql]# netstat -antp | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 71619/nginx: master
[root@localhost mysql]# netstat -antp | grep mysqld
tcp6 0 0 :::3306 ::: LISTEN 95058/mysqld

3、安装php

[root@localhost mysql]# yum -y install libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel curl curl-devel openssl openssl-devel
[root@localhost mysql]# cd /opt/LNMP/
[root@localhost LNMP]# tar jxvf php-7.1.10.tar.bz2 -C /opt/
[root@localhost LNMP]# cd /opt/php-7.1.10/
[root@localhost php-7.1.10]# ./configure --prefix=/usr/local/php --with-mysql-sock=/usr/local/mysql/mysql.sock --with-mysqli --with-zlib --with-curl --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-openssl --enable-fpm --enable-mbstring --enable-xml --enable-session --enable-ftp --enable-pdo --enable-tokenizer --enable-zip
[root@localhost php-7.1.10]# make && make install
[root@localhost php-7.1.10]# cp php.ini-development /usr/local/php/lib/php.ini //复制模板创建主配置文件
[root@localhost php-7.1.10]# vim /usr/local/php/lib/php.ini //配置主配置文件
1170 mysqli.default_socket = /usr/local/mysql/mysql.sock
date.timezone = Asia/Shanghai
[root@localhost php-7.1.10]# /usr/local/php/bin/php -m //查看所有模块
[PHP Modules]
Core
ctype
curl
date
dom
fileinfo
filter
ftp
gd
hash
iconv
json
libxml
mbstring
mysqli
mysqlnd
openssl
pcre
PDO
pdo_sqlite
Phar
posix
Reflection
session
SimpleXML
SPL
sqlite3
standard
tokenizer
xml
xmlreader
xmlwriter
zip
zlib

[Zend Modules]
[root@localhost php-7.1.10]# cd /usr/local/php/etc/
[root@localhost etc]# ls
pear.conf php-fpm.conf.default php-fpm.d //fpm模板
[root@localhost etc]# cp php-fpm.conf.default php-fpm.conf
[root@localhost etc]# ls
pear.conf php-fpm.conf php-fpm.conf.default php-fpm.d
[root@localhost etc]# vim php-fpm.conf
pid = run/php-fpm.pid
[root@localhost etc]# cd /usr/local/php/etc/
[root@localhost etc]# ls
pear.conf php-fpm.conf php-fpm.conf.default php-fpm.d
[root@localhost etc]# cd php-fpm.d/
[root@localhost php-fpm.d]# ls
www.conf.default
[root@localhost php-fpm.d]# cp www.conf.default www.conf
[root@localhost php-fpm.d]# ls
www.conf www.conf.default
[root@localhost php-fpm.d]# /usr/local/php/sbin/php-fpm -c /usr/local/php/lib/php.ini
[root@localhost php-fpm.d]# netstat -antp | grep 9000
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 105806/php-fpm: mas
[root@localhost php-fpm.d]# ln -s /usr/local/php/bin/* /usr/local/bin/ //设置软链接使得PHP的命令会被系统识别
[root@localhost php-fpm.d]# ps aux | grep -c “php-fpm”

4、让nginx支持PHP

[root@localhost php-fpm.d]# vim /usr/local/nginx/conf/nginx.conf
location ~ .php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /usr/local/nginx/html$fastcgi_script_name;
include fastcgi_params;
}
[root@localhost php-fpm.d]# systemctl stop nginx
[root@localhost php-fpm.d]# systemctl start nginx
[root@localhost php-fpm.d]# netstat -antp | grep nginx
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 106079/nginx: maste
[root@localhost php-fpm.d]# cd /usr/local/nginx/
[root@localhost nginx]# ls
client_body_temp conf fastcgi_temp html logs proxy_temp sbin scgi_temp uwsgi_temp
[root@localhost nginx]# cd html/
[root@localhost html]# ls
50x.html index.html
[root@localhost html]# mv index.html index.html.bak
[root@localhost html]# ls
50x.html index.html.bak
[root@localhost html]# vim index.php

<?php phpinfo() ?>

5、创建数据库

[root@localhost html]# mysql -u root -p
Enter password: abc123
mysql> CREATE DATABASE bbs;
Query OK, 1 row affected (0.00 sec)
mysql> GRANT all ON bbs.* TO ‘bbsuser’@’%’ IDENTIFIED BY ‘admin123’;
Query OK, 0 rows affected, 1 warning (0.01 sec)
mysql> GRANT all ON bbs.* TO ‘bbsuser’@‘localhost’ IDENTIFIED BY ‘admin123’;
Query OK, 0 rows affected, 1 warning (0.00 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.01 sec)
mysql> quit
Bye

6、更改测试页内容

[root@localhost html]# vim index.php

<?php $link=mysqli_connect('192.168.167.140','bbsuser','admin123'); if($link) echo "

Success!!

"; else echo "Fail!!"; ?>

[root@localhost html]# systemctl restart nginx
用win10浏览器登录192.168.167.140/index.php

7、安装论坛

[root@localhost html]# cd /opt/LNMP
[root@localhost LNMP]# unzip Discuz_X3.4_SC_UTF8.zip
[root@localhost LNMP]# mv dir_SC_UTF8/ /opt/
[root@localhost LNMP]# cd /opt/dir_SC_UTF8/
[root@localhost dir_SC_UTF8]# ls
readme upload utility
[root@localhost dir_SC_UTF8]# cp -r upload/ /usr/local/nginx/html/bbs
[root@localhost nginx]# cd /usr/local/nginx/html/bbs/
[root@localhost bbs]# ls
admin.php config favicon.ico index.php misc.php search.php uc_client
api connect.php forum.php install plugin.php source uc_server
api.php crossdomain.xml group.php m portal.php static
archiver data home.php member.php robots.txt template

[root@localhost bbs]# chown -R root:nginx ./config/
[root@localhost bbs]# chown -R root:nginx ./data/
[root@localhost bbs]# chown -R root:nginx ./uc_client/
[root@localhost bbs]# chown -R root:nginx ./uc_server/
[root@localhost bbs]# chmod -R 777 ./config/
[root@localhost bbs]# chmod -R 777 ./data/
[root@localhost bbs]# chmod -R 777 ./uc_client/
[root@localhost bbs]# chmod -R 777 ./uc_server/

打开win10 浏览器输入如下地址安装论坛
http://192.168.167.140/bbs/install/index.php

成功

总结

以上就是LNMP 部署及安装论坛的步骤 希望能给你们带来帮助