DHCP中继命令配置

LSW1配置：

<Huawei>sys
[Huawei]sys LS1
[LS1]v b 10 20
[LS1]int e0/0/1
[LS1-Ethernet0/0/1]port link-type access   //端口链路类型访问
[LS1-Ethernet0/0/1]port default vlan 10   //端口默认 vlan 10
[LS1-Ethernet0/0/1]un sh

[LS1-Ethernet0/0/1]int e0/0/2
[LS1-Ethernet0/0/2]port link-type access 	//端口链路类型访问
[LS1-Ethernet0/0/2]port default vlan 20     //端口默认 vlan 20
[LS1-Ethernet0/0/2]un sh

[LS1-Ethernet0/0/2]int e0/0/3
[LS1-Ethernet0/0/3]port link-type access     //端口链路类型访问
[LS1-Ethernet0/0/3]port default vlan 10     //端口默认 vlan 10
[LS1-Ethernet0/0/3]un sh

[LS1-Ethernet0/0/3]int e0/0/4
[LS1-Ethernet0/0/4]port link-type access     //端口链路类型访问
[LS1-Ethernet0/0/4]port default vlan 20    //端口默认 vlan 20
	
[LS1-Ethernet0/0/4]int g0/0/1
[LS1-GigabitEthernet0/0/1]port link-type trunk      //端口链路类型中继
[LS1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20    //端口中继允许通过vlan 10 20
[LS1-GigabitEthernet0/0/1]un sh

R1配置：

<Huawei>sys
[Huawei]sysname R1

[R1]dhcp enable    //dhcp启用

[R1]int g0/0/1.10
[R1-GigabitEthernet0/0/1.10]dot1q termination vid 10    //dot1q终止vid10
[R1-GigabitEthernet0/0/1.10]ip add 192.168.10.1 24    //ip 添加 192.168.10.1 24
[R1-GigabitEthernet0/0/1.10]arp broadcast enable     //arp 广播启用
[R1-GigabitEthernet0/0/1.10]un sh
[R1-GigabitEthernet0/0/1.10]dhcp select relay 
[R1-GigabitEthernet0/0/1.10]dhcp relay server-ip 14.0.0.2  //dhcp中继服务器-ip 14.0.0.2
[R1-GigabitEthernet0/0/1.10]un sh
[R1-GigabitEthernet0/0/1.10]q

[R1-GigabitEthernet0/0/1.10]int g0/0/1.20
[R1-GigabitEthernet0/0/1.20]dot1q termination vid 20     //dot1q终止vid20
[R1-GigabitEthernet0/0/1.20]ip add 192.168.20.1 24      //ip 添加 192.168.20.1 24
[R1-GigabitEthernet0/0/1.20]arp broadcast enable        //arp 广播启用
[R1-GigabitEthernet0/0/1.20]un sh   
[R1-GigabitEthernet0/0/1.20]dhcp select relay 
[R1-GigabitEthernet0/0/1.20]dhcp relay server-ip 14.0.0.2     //dhcp中继服务器-ip 14.0.0.2
[R1-GigabitEthernet0/0/1.20]un sh
[R1-GigabitEthernet0/0/1.20]q

[R1]int g0/0/2
[R1-GigabitEthernet0/0/2]ip add 14.0.0.1 24
[R1-GigabitEthernet0/0/2]un sh

[R1-GigabitEthernet0/0/2]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 12.0.0.1 24
[R1-GigabitEthernet0/0/0]un sh
[R1-GigabitEthernet0/0/0]q

[R1]ip route-static 15.0.0.0 24 12.0.0.2    //配置静态路由

R2配置：

<Huawei>sys
[Huawei]sysname R2
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.0.0.2 24
[R2-GigabitEthernet0/0/0]un sh

[R2]dhcp enable 
[R2]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 15.0.0.1 24
[R2-GigabitEthernet0/0/1]dhcp select relay 
[R2-GigabitEthernet0/0/1]dhcp relay server-ip 14.0.0.2
[R2-GigabitEthernet0/0/1]q
[R2-GigabitEthernet0/0/1]un sh
[R2-GigabitEthernet0/0/1]q

[R2]ip route-static 0.0.0.0 0.0.0.0 12.0.0.1   配置默认路由

R3配置：

<Huawei>sys
[Huawei]sys R3

[R3]dhcp enable 

[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 14.0.0.2 24
[R3-GigabitEthernet0/0/0]un sh
[R3-GigabitEthernet0/0/0]dhcp select global    //dhcp 选择全局
[R3-GigabitEthernet0/0/0]q

[R3]ip pool dhcp15
[R3-ip-pool-dhcp15]network 15.0.0.0 mask 24     //网络 15.0.0.0 掩码 24
[R3-ip-pool-dhcp15]gateway-list 15.0.0.1	    //网关列表 15.0.0.1
[R3-ip-pool-dhcp15]dns-list 8.8.8.8 2.2.2.2     
[R3-ip-pool-dhcp15]excluded-ip-address 15.0.0.100 15.0.0.254   //排除-ip 地址 15.0.0.100 15.0.0.254
[R3-ip-pool-dhcp15]static-bind ip-address 15.0.0.88 mac-address 5489-98B8-165E   
  //静态绑定 IP 地址 15.0.0.88 mac 地址 5489-98B8-165E
[R3-ip-pool-dhcp15]q

[R3]ip pool dhcpv10
[R3-ip-pool-dhcpv10]network 192.168.10.0 mask 24    //网络 192.168.10.0 掩码 24
[R3-ip-pool-dhcpv10]gateway-list 192.168.10.1   //网关列表 192.168.10.1
[R3-ip-pool-dhcpv10]dns-list 8.8.8.8 2.2.2.2
[R3-ip-pool-dhcpv10]q

[R3]ip pool dhcpv20
[R3-ip-pool-dhcpv20]network 192.168.20.0 mask 24
[R3-ip-pool-dhcpv20]gateway-list 192.168.20.1
[R3-ip-pool-dhcpv20]dns-list 8.8.8.8 2.2.2.2
[R3-ip-pool-dhcpv20]q

[R3]ip route-static 0.0.0.0 0.0.0.0 14.0.0.1    配置默认路由

5台PC将IPv4配置更改为DHCP 应用

点击命令行输入ipconfig /release 释放IP ipconfig /renew 获取IP

Ping下5台PC ip 是否互通