1.文件类型
在程序设计中,我们一般谈的文件有两种:程序文件、数据文件(从文件功能的角度来分类的)。
1 程序文件
包括源程序文件(后缀为.c),目标文件(windows环境后缀为.obj),可执行程序(windows环境后缀为.exe)。
2 数据文件
文件的内容不一定是程序,而是程序运行时读写的数据,比如程序运行需要从中读取数据的文件,或者输出内容的文件。
3 文件的打开和关闭
3.1 文件指针
缓冲文件系统中,关键的概念是“文件类型指针”,简称“文件指针”。
每个被使用的文件都在内存中开辟了一个相应的文件信息区,用来存放文件的相关信息(如文件的名字,文件状态及文件当前的位置等)。这些信息是保存在一个结构体变量中的。该结构体类型是有系统声明的,取名FILE.
例如,VS2013编译环境提供的stdio.h 头文件中有以下的文件类型申明:
struct _iobuf {
char *_ptr;
int _cnt;
char *_base;
int _flag;
int _file;
int _charbuf;
int _bufsiz;
char *_tmpfname;
};
typedef struct _iobuf FILE;
FILE* pf;//文件指针变量
不同的C编译器的FILE类型包含的内容不完全相同,但是大同小异。
每当打开一个文件的时候,系统会根据文件的情况自动创建一个FILE结构的变量,并填充其中的信息,使用者不必关心细节。一般都是通过一个FILE的指针来维护这个FILE结构的变量,这样使用起来更加方便。
下面我们可以创建一个FILE*的指针变量:
FILE* pf;//文件指针变量
定义pf是一个指向FILE类型数据的指针变量。可以使pf指向某个文件的文件信息区(是一个结构体变量)。通过该文件信息区中的信息就能够访问该文件。也就是说,通过文件指针变量能够找到与它关联的文件。
3.2 文件的打开和关闭
文件在读写之前应该先打开文件,在使用结束之后应该关闭文件。
在编写程序的时候,在打开文件的同时,都会返回一个FILE*的指针变量指向该文件,也相当于建立了
指针和文件的关系。
ANSIC 规定使用fopen函数来打开文件,fclose来关闭文件。
//打开文件
FILE * fopen(const char * filename, const char * mode);
//关闭文件
int fclose(FILE * stream);
实例代码:
#include <stdio.h>
int main()
{
FILE * pFile;
//打开文件
pFile = fopen("myfile.txt", "w");
//文件操作
if (pFile != NULL)
{
fputs("fopen example", pFile);
//关闭文件
fclose(pFile);
}
return 0;
}
4. 文件的随机读写
4.1 fseek
根据文件指针的位置和偏移量来定位文件指针。
例子:
#include <stdio.h>
int main()
{
/* fseek example */
FILE * pFile;
pFile = fopen("example.txt", "wb");
fputs("This is an apple.", pFile);
fseek(pFile, 9, SEEK_SET);
fputs(" sam", pFile);
fclose(pFile);
system("pause");
return 0;
}
4.2 ftell
返回文件指针相对于起始位置的偏移量
int fseek ( FILE * stream, long int offset, int origin );
long int ftell ( FILE * stream );
例子:
/* ftell example : getting size of a file */
#include <stdio.h>
int main()
{
FILE * pFile;
long size;
pFile = fopen("myfile.txt", "rb");
if (pFile == NULL)
perror("Error opening file");
else
{
fseek(pFile, 0, SEEK_END); // non-portable
size = ftell(pFile);
fclose(pFile);
printf("Size of myfile.txt: %ld bytes.\n", size);
}
system("pause");
return 0;
}
4.3rewind
让文件指针的位置回到文件的起始位置
void rewind ( FILE * stream );
例子:
/* rewind example */
#include <stdio.h>
int main()
{
int n;
FILE * pFile;
char buffer[27];
pFile = fopen("myfile.txt", "w+");
for (n = 'A'; n <= 'Z'; n++)
fputc(n, pFile);
rewind(pFile);
fread(buffer, 1, 26, pFile);
fclose(pFile);
buffer[26] = '\0';
puts(buffer);
system("pause");
return 0;
}
6. 文件读取结束的判定
6.1 被错误使用的feof
牢记:在文件读取过程中,不能用feof函数的返回值直接用来判断文件的是否结束。
而是应用于当文件读取结束的时候,判断是读取失败结束,还是遇到文件尾结束。
- 文本文件读取是否结束,判断返回值是否为EOF ( fgetc ),或者NULL ( fgets )
例如:
fgetc 判断是否为EOF .
fgets 判断返回值是否为NULL . - 二进制文件的读取结束判断,判断返回值是否小于实际要读的个数。
fread判断返回值是否小于要读的个数。
文本文件的例子:
#include <stdio.h>
#include <stdlib.h>
int main(void)
{
int c; // 注意:int,非char,要求处理EOF
FILE* fp = fopen("myfile.txt", "r");
if (!fp)
{
perror("File opening failed");
return EXIT_FAILURE;
}
//fgetc 当读取失败的时候或者遇到文件结束的时候,都会返回EOF
while ((c = fgetc(fp)) != EOF) // 标准C I/O读取文件循环
{
putchar(c);
}
//判断是什么原因结束的
if (ferror(fp))
puts(" I/O error when reading");
else if (feof(fp))
puts(" End of file reached successfully");
fclose(fp);
system("pause");
return 0;
}
二进制文件的例子:
#include <stdio.h>
enum { SIZE = 5 };
int main(void)
{
double a[SIZE] = { 1., 2., 3., 4., 5. };
FILE *fp = fopen("test.bin", "wb"); // 必须用二进制模式
fwrite(a, sizeof *a, SIZE, fp); // 写 double 的数组
fclose(fp);
double b[SIZE];
fp = fopen("test.bin", "rb");
size_t ret_code = fread(b, sizeof *b, SIZE, fp); // 读 double 的数组
if (ret_code == SIZE)
{
puts("Array read successfully, contents: ");
for (int n = 0; n < SIZE; ++n) printf("%f ", b[n]);
putchar('\n');
}
else { // error handling
if (feof(fp))
printf("Error reading test.bin: unexpected end of file\n");
else if (ferror(fp)) {
perror("Error reading test.bin");
}
}
fclose(fp);
system("pause");
}