zlg-imx-283A uboot default env

MX28 U-Boot > print   
bootcmd=run nand_boot
bootdelay=1
baudrate=115200
ipaddr=192.168.1.144
serverip=192.168.1.145
netmask=255.255.255.0
bootfile="uImage"
loadaddr=0x42000000
kernel=uImage
kernelsize=0x400000
rootfs=rootfs.ubifs
showbitmap=0
kerneladdr=0x00200000
kerneladdr2=0x00780000
gatewayip=192.168.1.1
ds2460_mac=00:04:00:00:00:00
bootargs_nfs=setenv bootargs gpmi=g root=/dev/nfs rw console=ttyAM0,115200n8 nfsroot=$(serverip):$(nfsroot) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):epc.zlgmcu.com:eth0:down
bootcmd_net=run bootargs_nfs;
bootcmd_mmc=run bootargs_mmc; mmc read 0 ${loadaddr} 100 3000; bootm
bootargs_nand=setenv bootargs gpmi=g console=ttyAM0,115200n8 ubi.mtd=5 root=ubi0:rootfs rootfstype=ubifs ro
bootargs_mmc=gpmi=g console=ttyAM0,115200n8 console=tty0 root=/dev/mmcblk0p3 rw
upuboot=tftp $(loadaddr) $(serverip):imx28_ivt_uboot.sb;nand erase 0x0 0x100000; nand write $(loadaddr) 0x0 0x100000
upkernel=tftp $(loadaddr) $(serverip):$(kernel);nand erase  $(kerneladdr) $(kernelsize);nand write $(loadaddr) $(kerneladdr) $(filesize);
upkernel2=nand erase $(kerneladdr2) $(kernelsize);nand write $(loadaddr) $(kerneladdr2) $(filesize)
uprootfs=mtdparts default;nand erase rootfs;ubi part rootfs;ubi create  rootfs;tftp $(loadaddr) $(rootfs);ubi write $(loadaddr) rootfs $(filesize)
sd_upkernel=mmc read 0 0x42000000 1 1; fatload mmc 0:1 42000000 uImage;nand erase  $(kerneladdr) $(kernelsize);nand write $(loadaddr) $(kerneladdr) $(filesize);
sd_upkernel2=nand erase $(kerneladdr2) $(kernelsize);nand write $(loadaddr) $(kerneladdr2) $(filesize)
sd_uprootfs=mtdparts default;nand erase rootfs;ubi part rootfs;ubi create  rootfs;mmc read 0 0x42000000 1 1; fatload mmc 0:1 42000000 rootfs.ubifs;ubi write $(loadaddr) rootfs $(filesize)
tftp_boot=tftp $(loadaddr) $(serverip):uImage; bootm;
nand_boot=nand read.jffs2 $(loadaddr) $(kerneladdr) $(kernelsize);bootm $(loadaddr);nand read.jffs2 $(loadaddr) $(kerneladdr2) $(kernelsize);bootm $(loadaddr)
setnandboot=setenv bootcmd 'run  nand_boot';saveenv 
settftpboot=setenv bootcmd 'run  tftp_boot';saveenv 
upsystem=run upkernel;run upkernel2;run uprootfs;reset 
sd_upsystem=run sd_upkernel;run sd_upkernel2;run sd_uprootfs;reset 
ethact=FEC0
nfsroot=/home/zhangjy/nfs/myrootfs
bootargs=gpmi=g root=/dev/nfs rw console=ttyAM0,115200n8 nfsroot=192.168.1.145:/home/zhangjy/nfs/myrootfs ip=192.168.1.144:192.168.1.145:192.168.1.1:255.255.255.0:epc.zlgmcu.com:eth0:down
mem=64M
stdin=serial
stdout=serial
stderr=serial
ver=U-Boot 2009.08 ( 5月 13 2016 - 09:49:44)

Environment size: 2513/131068 bytes
MX28 U-Boot > 

1、

bootargs_mmc=gpmi=g console=ttyAM0,115200n8 console=tty0 root=/dev/mmcblk0p3 rw

uboot环境变量，从左到右，第一个等号后面所有字符进行一次性匹配，即bootargs_mmc 等于

gpmi=g console=ttyAM0,115200n8 console=tty0 root=/dev/mmcblk0p3 rw

2、
bootargs 是uboot传给kernel的参数，bootargs放在了uboot和kernel约定好的扇区上，内核启动后会去指定地址杜bootargs（如何约定的，回头我研究一下）

3、uboot启动后有一个超时时间，超时时间已过默认执行bootcmd