目录
3.3.4 部署kube-controller-manager
一、环境信息
1.1、集群信息
| 主机名 | 角色 | IP | 组件 |
| k8s-master1 | master | 192.168.3.61 | nginx、keepalived apiserver，controller-manager、etcd、scheduler |
| k8s-master2 | master | 192.168.3.62 | nginx、keepalived apiserver，controller-manager、etcd、scheduler |
| k8s-master3 | master | 192.168.3.63 | apiserver，controller-manager、etcd、scheduler |
| k8s-node1 | node | 192.168.3.64 | kubelet、kube-proxy |
| k8s-node2 | node | 192.168.3.65 | kubelet、kube-proxy |
| vip | vip | 192.168.3.60 |
1.2 架构图
凑合看吧
二、初始化准备
首先按1.1中集群信息准备好机器，并设置好IP
2.1 、设置主机名并添加HOSTS
按照1.1表格信息设置每一台的主机名
[root@localhost ~]# hostnamectl set-hostname k8s-master1
[root@localhost ~]#
[root@localhost ~]# cat /etc/hosts
192.168.3.61 k8s-master1
192.168.3.62 k8s-master2
192.168.3.63 k8s-master3
192.168.3.64 k8s-node1
192.168.3.65 k8s-node2
2.2 配置免密登录
配置三个master节点可以免密登录所有机器，在三个master节点上执行，
[root@localhost ~]# ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
Created directory '/root/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:Rt+CFiJmUtfV6LmHQQ9LW7tJMbpxGql1XYti7q+jeNY root@k8s-node2
The key's randomart image is:
+---[RSA 3072]----+
| . .. ..o |
| . . . = = .|
| . + . o+ X =...|
| + . o +%+*... |
| So=%oo |
| o. =o+ |
| o. |
| .o E |
| .o...+. |
+----[SHA256]-----+
[root@localhost ~]#
[root@localhost ~]#
[root@localhost ~]# ll
总用量 4
-rw-------. 1 root root 1187 2月 20 15:41 anaconda-ks.cfg
[root@localhost ~]# ssh-copy-id -i .ssh/id_rsa.pub k8s-master1
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: ".ssh/id_rsa.pub"
The authenticity of host 'k8s-master1 (192.168.3.61)' can't be established.
ECDSA key fingerprint is SHA256:/z2wiIxMLuXcbG5132CVezhjJtQf9BEQSM77zSDGzoI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@k8s-master1's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'k8s-master1'"
and check to make sure that only the key(s) you wanted were added.
[root@localhost ~]# ssh-copy-id -i .ssh/id_rsa.pub k8s-master2
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: ".ssh/id_rsa.pub"
The authenticity of host 'k8s-master2 (192.168.3.62)' can't be established.
ECDSA key fingerprint is SHA256:/z2wiIxMLuXcbG5132CVezhjJtQf9BEQSM77zSDGzoI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@k8s-master2's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'k8s-master2'"
and check to make sure that only the key(s) you wanted were added.
[root@localhost ~]# ssh-copy-id -i .ssh/id_rsa.pub k8s-master3
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: ".ssh/id_rsa.pub"
The authenticity of host 'k8s-master3 (192.168.3.63)' can't be established.
ECDSA key fingerprint is SHA256:/z2wiIxMLuXcbG5132CVezhjJtQf9BEQSM77zSDGzoI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@k8s-master3's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'k8s-master3'"
and check to make sure that only the key(s) you wanted were added.
[root@localhost ~]# ssh-copy-id -i .ssh/id_rsa.pub k8s-node1
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: ".ssh/id_rsa.pub"
The authenticity of host 'k8s-node1 (192.168.3.64)' can't be established.
ECDSA key fingerprint is SHA256:/z2wiIxMLuXcbG5132CVezhjJtQf9BEQSM77zSDGzoI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@k8s-node1's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'k8s-node1'"
and check to make sure that only the key(s) you wanted were added.
[root@localhost ~]# ssh-copy-id -i .ssh/id_rsa.pub k8s-node2
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: ".ssh/id_rsa.pub"
The authenticity of host 'k8s-node2 (192.168.3.65)' can't be established.
ECDSA key fingerprint is SHA256:/z2wiIxMLuXcbG5132CVezhjJtQf9BEQSM77zSDGzoI.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@k8s-node2's password:
Number of key(s) added: 1
Now try logging into the machine, with: "ssh 'k8s-node2'"
and check to make sure that only the key(s) you wanted were added.
[root@localhost ~]# ssh k8s-node2
Last login: Sun Feb 20 18:23:50 2022 from 192.168.3.202
[root@k8s-node2 ~]# exit
注销
Connection to k8s-node2 closed.
[root@localhost ~]#
2.3 关闭selinux
在所有机器上关闭selinux
[root@localhost ~]# vi /etc/sysconfig/selinux
SELINUX=disabled #修改成disabled
[root@localhost ~]# setenforce 0
[root@localhost ~]# getenforce #也可重启生效
Permissive
2.4 关闭swap
[root@localhost ~]# swapoff -a
[root@localhost ~]# vi /etc/fstab
[root@localhost ~]# df -h
#注释掉 #/dev/mapper/cl-swap none swap defaults 0 0
[root@localhost ~]# free -g
total used free shared buff/cache available
Mem: 3 0 2 0 0 3
Swap: 0 0 0
[root@localhost ~]#
2.5 关闭firewalld
[root@localhost ~]# systemctl stop firewalld
[root@localhost ~]# systemctl disable firewalld
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
2.6 修改内核参数
[root@localhost ~]# modprobe br_netfilter
[root@localhost ~]# lsmod |grep br_netfilter
br_netfilter 24576 0
bridge 200704 1 br_netfilter
[root@localhost ~]# cat > /etc/sysctl.d/k8s.conf <<EOF
> net.bridge.bridge-nf-call-ip6tables = 1
> net.bridge.bridge-nf-call-iptables = 1
> net.ipv4.ip_forward = 1
> EOF
[root@localhost ~]# sysctl -p /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
[root@localhost ~]#
说明
modprobe br_netfilter如果不加载次模块
sysctl -p /etc/sysctl.d/k8s.conf出现报错：
sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-ip6tables: No such file or directory
sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-iptables: No such file or directory
如不开启net.bridge.bridge-nf-call-iptables
在centos下安装docker，执行docker info出现如下警告：
WARNING: bridge-nf-call-iptables is disabled
WARNING: bridge-nf-call-ip6tables is disabled
如不开启net.ipv4.ip_forward = 1参数
kubeadm初始化k8s如果报错： ERROR FileContent--proc-sys-net-ipv4-ip_forward] : .....
net.ipv4.ip_forward是数据包转发：
Linux系统默认禁止数据包转发。所谓转发即当主机拥有多于一块的网卡时，其中一块收到数据包，根据数据包的目的ip地址将数据包发往本机另一块网卡，该网卡根据路由表继续发送数据包。这通常是路由器所要实现的功能,要让Linux系统具有路由转发功能，需要配置一个Linux的内核参数net.ipv4.ip_forward。这个参数指定了Linux系统当前对路由转发功能的支持情况；
2.7 配置yum repo源
[root@localhost ~]# mkdir /etc/yum.repos.d/bak
[root@localhost ~]# mv /etc/yum.repos.d/
bak/ CentOS-Linux-Devel.repo CentOS-Linux-Plus.repo
CentOS-Linux-AppStream.repo CentOS-Linux-Extras.repo CentOS-Linux-PowerTools.repo
CentOS-Linux-BaseOS.repo CentOS-Linux-FastTrack.repo CentOS-Linux-Sources.repo
CentOS-Linux-ContinuousRelease.repo CentOS-Linux-HighAvailability.repo
CentOS-Linux-Debuginfo.repo CentOS-Linux-Media.repo
[root@localhost ~]# mv /etc/yum.repos.d/CentOS-Linux-* /etc/yum.repos.d/bak/
[root@localhost ~]# curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-vault-8.5.2111.repo
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2495 100 2495 0 0 14339 0 --:--:-- --:--:-- --:--:-- 14257
[root@localhost ~]# yum clean all
0 文件已删除
[root@localhost ~]# yum install lrzsz
CentOS-8.5.2111 - Base - mirrors.aliyun.com 2.4 MB/s | 4.6 MB 00:01
CentOS-8.5.2111 - Extras - mirrors.aliyun.com 22 kB/s | 10 kB 00:00
CentOS-8.5.2111 - AppStream - mirrors.aliyun.com 1.6 MB/s | 8.4 MB 00:05
依赖关系解决。
===============================================================================================================================
软件包 架构 版本 仓库 大小
===============================================================================================================================
安装:
lrzsz x86_64 0.12.20-43.el8 base 84 k
事务概要
===============================================================================================================================
安装 1 软件包
总下载：84 k
安装大小：190 k
确定吗？[y/N]： y
下载软件包：
lrzsz-0.12.20-43.el8.x86_64.rpm 495 kB/s | 84 kB 00:00
-------------------------------------------------------------------------------------------------------------------------------
总计 492 kB/s | 84 kB 00:00
运行事务检查
事务检查成功。
运行事务测试
事务测试成功。
运行事务
准备中 : 1/1
安装 : lrzsz-0.12.20-43.el8.x86_64 1/1
运行脚本: lrzsz-0.12.20-43.el8.x86_64 1/1
验证 : lrzsz-0.12.20-43.el8.x86_64 1/1
已安装:
lrzsz-0.12.20-43.el8.x86_64
完毕！
[root@localhost ~]#
2.8 配置时间同步
[root@localhost ~]# yum install -y chrony
上次元数据过期检查：0:03:17 前，执行于 2022年02月20日 星期日 03时29分28秒。
软件包 chrony-4.1-1.el8.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕！
[root@localhost ~]# vi /etc/chrony.conf
#pool 2.centos.pool.ntp.org iburst #注释掉
server ntp.aliyun.com iburst
[root@localhost ~]# systemctl restart chronyd.service
[root@localhost ~]# systemctl enable chronyd
[root@localhost ~]# chronyc sources -v
.-- Source mode '^' = server, '=' = peer, '#' = local clock.
/ .- Source state '*' = current best, '+' = combined, '-' = not combined,
| / 'x' = may be in error, '~' = too variable, '?' = unusable.
|| .- xxxx [ yyyy ] +/- zzzz
|| Reachability register (octal) -. | xxxx = adjusted offset,
|| Log2(Polling interval) --. | | yyyy = measured offset,
|| \ | | zzzz = estimated error.
|| | | \
MS Name/IP address Stratum Poll Reach LastRx Last sample
===============================================================================
^* 203.107.6.88 2 6 17 14 +343us[ +831us] +/- 20ms
[root@localhost ~]# date
2022年 02月 20日 星期日 03:35:01 EST
[root@localhost ~]# date -R #发现时区不对
Sun, 20 Feb 2022 03:36:03 -0500
[root@localhost ~]# timedatectl set-timezone Asia/Shanghai #修改时区
[root@localhost ~]# date
2022年 02月 20日 星期日 16:36:30 CST
[root@localhost ~]#
2.9 安装Iptables
安装并清空规则，关闭即可，k8s自己初始化
[root@localhost ~]# yum install iptables-services -y
上次元数据过期检查：0:09:39 前，执行于 2022年02月20日 星期日 16时29分28秒。
依赖关系解决。
===============================================================================================================================
软件包 架构 版本 仓库 大小
===============================================================================================================================
安装:
iptables-services x86_64 1.8.4-20.el8 base 63 k
事务概要
===============================================================================================================================
安装 1 软件包
总下载：63 k
安装大小：20 k
下载软件包：
iptables-services-1.8.4-20.el8.x86_64.rpm 263 kB/s | 63 kB 00:00
-------------------------------------------------------------------------------------------------------------------------------
总计 261 kB/s | 63 kB 00:00
运行事务检查
事务检查成功。
运行事务测试
事务测试成功。
运行事务
准备中 : 1/1
安装 : iptables-services-1.8.4-20.el8.x86_64 1/1
运行脚本: iptables-services-1.8.4-20.el8.x86_64 1/1
验证 : iptables-services-1.8.4-20.el8.x86_64 1/1
已安装:
iptables-services-1.8.4-20.el8.x86_64
完毕！
[root@localhost ~]# service iptables stop && systemctl disable iptables
Redirecting to /bin/systemctl stop iptables.service
[root@localhost ~]# iptables -F
[root@localhost ~]#
2.10 开启ipvs
不开启ipvs将会使用iptables进行数据包转发，但是效率低，所以推荐开通ipvs。
[root@localhost ~]# cat /etc/sysconfig/modules/ipvs.modules
modprobe -- ip_vs
modprobe -- ip_vs_lc
modprobe -- ip_vs_wlc
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_lblc
modprobe -- ip_vs_lblcr
modprobe -- ip_vs_dh
modprobe -- ip_vs_sh
modprobe -- ip_vs_nq
modprobe -- ip_vs_sed
modprobe -- ip_vs_ftp
modprobe -- nf_conntrack
[root@localhost ~]# chmod 755 /etc/sysconfig/modules/ipvs.modules
[root@localhost ~]# bash /etc/sysconfig/modules/ipvs.modules
[root@localhost ~]# lsmod | grep ip_vs
ip_vs_ftp 16384 0
ip_vs_sed 16384 0
ip_vs_nq 16384 0
ip_vs_dh 16384 0
ip_vs_lblcr 16384 0
ip_vs_lblc 16384 0
ip_vs_wlc 16384 0
ip_vs_lc 16384 0
ip_vs_sh 16384 0
ip_vs_wrr 16384 0
ip_vs_rr 16384 0
ip_vs 172032 22 ip_vs_wlc,ip_vs_rr,ip_vs_dh,ip_vs_lblcr,ip_vs_sh,ip_vs_nq,ip_vs_lblc,ip_vs_wrr,ip_vs_lc,ip_vs_sed,ip_vs_ftp
nf_nat 45056 2 nft_chain_nat,ip_vs_ftp
nf_conntrack 172032 3 nf_nat,nft_ct,ip_vs
nf_defrag_ipv6 20480 2 nf_conntrack,ip_vs
libcrc32c 16384 5 nf_conntrack,nf_nat,nf_tables,xfs,ip_vs
2.11 安装编译环境和常用软件
[root@localhost ~]# yum install wget vim make gcc gcc-c++ ipvsadm telnet net-tools -y
上次元数据过期检查：0:26:42 前，执行于 2022年02月20日 星期日 16时29分28秒。
依赖关系解决。
===============================================================================================================================
软件包 架构 版本 仓库 大小
===============================================================================================================================
安装:
... ...
已升级:
libgcc-8.5.0-4.el8_5.x86_64 libgomp-8.5.0-4.el8_5.x86_64 libstdc++-8.5.0-4.el8_5.x86_64
已安装:
binutils-2.30-108.el8_5.1.x86_64 cpp-8.5.0-4.el8_5.x86_64 gcc-8.5.0-4.el8_5.x86_64
gcc-c++-8.5.0-4.el8_5.x86_64 glibc-devel-2.28-164.el8.x86_64 glibc-headers-2.28-164.el8.x86_64
gpm-libs-1.20.7-17.el8.x86_64 ipvsadm-1.31-1.el8.x86_64 isl-0.16.1-6.el8.x86_64
kernel-headers-4.18.0-348.7.1.el8_5.x86_64 libmetalink-0.1.3-7.el8.x86_64 libmpc-1.1.0-9.1.el8.x86_64
libpkgconf-1.4.2-1.el8.x86_64 libstdc++-devel-8.5.0-4.el8_5.x86_64 libxcrypt-devel-4.1.1-6.el8.x86_64
make-1:4.2.1-10.el8.x86_64 net-tools-2.0-0.52.20160912git.el8.x86_64 pkgconf-1.4.2-1.el8.x86_64
pkgconf-m4-1.4.2-1.el8.noarch pkgconf-pkg-config-1.4.2-1.el8.x86_64 telnet-1:0.17-76.el8.x86_64
vim-common-2:8.0.1763-16.el8.x86_64 vim-enhanced-2:8.0.1763-16.el8.x86_64 vim-filesystem-2:8.0.1763-16.el8.noarch
wget-1.19.5-10.el8.x86_64
完毕！
[root@localhost ~]#
2.12 安装docker
或者可以使用containerd，本次使用docker，安装docker后并配置镜像加速
[root@localhost ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
上次元数据过期检查：3:09:42 前，执行于 2022年02月20日 星期日 16时29分28秒。
软件包 device-mapper-persistent-data-0.9.0-4.el8.x86_64 已安装。
软件包 lvm2-8:2.03.12-10.el8.x86_64 已安装。
依赖关系解决。
===============================================================================================================================
软件包 架构 版本 仓库 大小
===============================================================================================================================
安装:
yum-utils noarch 4.0.21-3.el8 base 73 k
事务概要
===============================================================================================================================
安装 1 软件包
总下载：73 k
安装大小：22 k
下载软件包：
yum-utils-4.0.21-3.el8.noarch.rpm 333 kB/s | 73 kB 00:00
-------------------------------------------------------------------------------------------------------------------------------
总计 330 kB/s | 73 kB 00:00
运行事务检查
事务检查成功。
运行事务测试
事务测试成功。
运行事务
准备中 : 1/1
安装 : yum-utils-4.0.21-3.el8.noarch 1/1
运行脚本: yum-utils-4.0.21-3.el8.noarch 1/1
验证 : yum-utils-4.0.21-3.el8.noarch 1/1
已安装:
yum-utils-4.0.21-3.el8.noarch
完毕！
[root@localhost ~]# yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
添加仓库自：https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
[root@localhost ~]# sed -i 's+download.docker.com+mirrors.aliyun.com/docker-ce+' /etc/yum.repos.d/docker-ce.repo
[root@localhost ~]# yum -y install docker-ce
Docker CE Stable - x86_64 43 kB/s | 19 kB 00:00
依赖关系解决。
===============================================================================================================================
软件包 架构 版本 仓库 大小
===============================================================================================================================
安装:
docker-ce x86_64 3:20.10.12-3.el8 docker-ce-stable 22 M
安装依赖关系:
。。。 。。。
已安装:
checkpolicy-2.9-1.el8.x86_64 container-selinux-2:2.167.0-1.module_el8.5.0+911+f19012f9.noarch
containerd.io-1.4.12-3.1.el8.x86_64 docker-ce-3:20.10.12-3.el8.x86_64
docker-ce-cli-1:20.10.12-3.el8.x86_64 docker-ce-rootless-extras-20.10.12-3.el8.x86_64
docker-scan-plugin-0.12.0-3.el8.x86_64 fuse-overlayfs-1.7.1-1.module_el8.5.0+890+6b136101.x86_64
fuse3-3.2.1-12.el8.x86_64 fuse3-libs-3.2.1-12.el8.x86_64
libcgroup-0.41-19.el8.x86_64 libslirp-4.4.0-1.module_el8.5.0+890+6b136101.x86_64
policycoreutils-python-utils-2.9-16.el8.noarch python3-audit-3.0-0.17.20191104git1c2f876.el8.x86_64
python3-libsemanage-2.9-6.el8.x86_64 python3-policycoreutils-2.9-16.el8.noarch
python3-setools-4.3.0-2.el8.x86_64 slirp4netns-1.1.8-1.module_el8.5.0+890+6b136101.x86_64
完毕！
[root@localhost ~]#
[root@localhost ~]# mkdir /etc/docker
[root@localhost ~]# vim /etc/docker/daemon.json
{
"registry-mirrors":["https://registry.docker-cn.com","https://docker.mirrors.ustc.edu.cn","http://hub-mirror.c.163.com"],
"exec-opts": ["native.cgroupdriver=systemd"]
}
[root@localhost ~]# systemctl daemon-reload
[root@localhost ~]# systemctl restart docker
[root@localhost ~]# docker version
Client: Docker Engine - Community
Version: 20.10.12
API version: 1.41
Go version: go1.16.12
Git commit: e91ed57
Built: Mon Dec 13 11:45:22 2021
OS/Arch: linux/amd64
Context: default
Experimental: true
Server: Docker Engine - Community
Engine:
Version: 20.10.12
API version: 1.41 (minimum version 1.12)
Go version: go1.16.12
Git commit: 459d0df
Built: Mon Dec 13 11:43:44 2021
OS/Arch: linux/amd64
Experimental: false
containerd:
Version: 1.4.12
GitCommit: 7b11cfaabd73bb80907dd23182b9347b4245eb5d
runc:
Version: 1.0.2
GitCommit: v1.0.2-0-g52b36a2
docker-init:
Version: 0.19.0
GitCommit: de40ad0
[root@localhost ~]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
[root@localhost ~]# docker pull nginx
Using default tag: latest
latest: Pulling from library/nginx
a2abf6c4d29d: Pull complete
a9edb18cadd1: Pull complete
589b7251471a: Pull complete
186b1aaa4aa6: Pull complete
b4df32aa5a72: Pull complete
a0bcbecc962e: Pull complete
Digest: sha256:0d17b565c37bcbd895e9d92315a05c1c3c9a29f762b011a10c54a66cd53c9b31
Status: Downloaded newer image for nginx:latest
docker.io/library/nginx:latest
[root@localhost ~]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
nginx latest 605c77e624dd 7 weeks ago 141MB
[root@localhost ~]#
三、安装组件
3.1 创建CA 证书和密钥
3.1.1 安装 CFSSL证书签发工具
可以去github下载最新版本
https://github.com/cloudflare/cfssl/releases
[root@k8s-master1 ~]# ll cfssl*
-rw-r--r-- 1 root root 16659824 2月 21 09:12 cfssl_1.6.1_linux_amd64
-rw-r--r-- 1 root root 13502544 2月 21 09:12 cfssl-certinfo_1.6.1_linux_amd64
-rw-r--r-- 1 root root 11029744 2月 21 09:12 cfssljson_1.6.1_linux_amd64
[root@k8s-master1 ~]# chmod +x cfssl*
[root@k8s-master1 ~]# cp cfssl_1.6.1_linux_amd64 /usr/local/bin/cfssl
[root@k8s-master1 ~]# cp cfssl-certinfo_1.6.1_linux_amd64 /usr/local/bin/cfssl-certinfo
[root@k8s-master1 ~]# cp cfssljson_1.6.1_linux_amd64 /usr/local/bin/cfssljson
[root@k8s-master1 ~]#
3.1.2 创建CA
[root@k8s-master1 ~]# cfssl print-defaults config > ca-config.json
[root@k8s-master1 ~]# cfssl print-defaults csr > ca-csr.json
[root@k8s-master1 ~]# vim ca-config.json
[root@k8s-master1 ~]# cat ca-config.json
{
"signing": {
"default": {
"expiry": "87600h"
},
"profiles": {
"kubernetes": {
"expiry": "87600h",
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
]
}
}
}
}
-
config.json：可以定义多个profiles，分别指定不同的过期时间、使用场景等参数；后续在签名证书时使用某个profile； signing: 表示该证书可用于签名其它证书；生成的ca.pem 证书中CA=TRUE；server auth: 表示client 可以用该CA 对server 提供的证书进行校验；client auth: 表示server 可以用该CA 对client 提供的证书进行验证。
[root@k8s-master1 ~]# vim ca-csr.json
[root@k8s-master1 ~]# cat ca-csr.json
{
"CN": "kubernetes",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "k8s",
"OU": "system"
}
],
"ca": {
"expiry": "87600h"
}
}
CN:Common Name，kube-apiserver 从证书中提取该字段作为请求的用户名(User Name)；浏览器使用该字段验证网站是否合法；O:Organization，kube-apiserver 从证书中提取该字段作为请求用户所属的组(Group)；
生成CA 证书和私钥
[root@k8s-master1 ~]# cfssl gencert -initca ca-csr.json | cfssljson -bare ca
2022/02/21 09:47:21 [INFO] generating a new CA key and certificate from CSR
2022/02/21 09:47:21 [INFO] generate received request
2022/02/21 09:47:21 [INFO] received CSR
2022/02/21 09:47:21 [INFO] generating key: rsa-2048
2022/02/21 09:47:22 [INFO] encoded CSR
2022/02/21 09:47:22 [INFO] signed certificate with serial number 562969161462549692386669206897984170659799392725
[root@k8s-master1 ~]# ll ca*
-rw-r--r-- 1 root root 387 2月 21 09:20 ca-config.json
-rw-r--r-- 1 root root 1045 2月 21 09:47 ca.csr
-rw-r--r-- 1 root root 257 2月 21 09:45 ca-csr.json
-rw------- 1 root root 1679 2月 21 09:47 ca-key.pem
-rw-r--r-- 1 root root 1310 2月 21 09:47 ca.pem
3.1.3 分发证书
将生成的CA 证书、密钥文件、配置文件拷贝到所有机器的/etc/kubernetes/ssl目录下
[root@k8s-master1 ~]# mkdir -p /etc/kubernetes/ssl
[root@k8s-master1 ~]# cp ca* /etc/kubernetes/ssl
[root@k8s-master1 ~]# ssh k8s-master2 "mkdir -p /etc/kubernetes/ssl"
[root@k8s-master1 ~]# ssh k8s-master3 "mkdir -p /etc/kubernetes/ssl"
[root@k8s-master1 ~]# ssh k8s-node1 "mkdir -p /etc/kubernetes/ssl"
[root@k8s-master1 ~]# ssh k8s-node2 "mkdir -p /etc/kubernetes/ssl"
[root@k8s-master1 ~]# scp ca* k8s-master2:/etc/kubernetes/ssl/
ca-config.json 100% 387 316.3KB/s 00:00
ca.csr 100% 1045 1.3MB/s 00:00
ca-csr.json 100% 257 399.6KB/s 00:00
ca-key.pem 100% 1679 2.6MB/s 00:00
ca.pem 100% 1310 2.4MB/s 00:00
[root@k8s-master1 ~]# scp ca* k8s-master3:/etc/kubernetes/ssl/
ca-config.json 100% 387 334.4KB/s 00:00
ca.csr 100% 1045 1.4MB/s 00:00
ca-csr.json 100% 257 286.7KB/s 00:00
ca-key.pem 100% 1679 1.9MB/s 00:00
ca.pem 100% 1310 2.1MB/s 00:00
[root@k8s-master1 ~]# scp ca* k8s-node1:/etc/kubernetes/ssl/
ca-config.json 100% 387 365.7KB/s 00:00
ca.csr 100% 1045 1.1MB/s 00:00
ca-csr.json 100% 257 379.1KB/s 00:00
ca-key.pem 100% 1679 2.1MB/s 00:00
ca.pem 100% 1310 1.8MB/s 00:00
[root@k8s-master1 ~]# scp ca* k8s-node2:/etc/kubernetes/ssl/
ca-config.json 100% 387 416.2KB/s 00:00
ca.csr 100% 1045 1.6MB/s 00:00
ca-csr.json 100% 257 368.6KB/s 00:00
ca-key.pem 100% 1679 2.5MB/s 00:00
ca.pem 100% 1310 2.0MB/s 00:00
[root@k8s-master1 ~]#
3.2 部署高可用etcd集群
kubernetes 系统使用etcd存储所有的数据，我们这里部署3个节点的etcd 集群，这3个节点直接复用kubernetes master的3个节点，分别命名为etcd01、etcd02、etcd03:
- etcd01：192.168.3.61
- etcd02：192.168.3.62
- etcd03：192.168.3.63
3.2.1 下载etcd
可以到github上下载最新版本
[root@k8s-master1 ~]# wget https://github.com/coreos/etcd/releases/download/v3.5.2/etcd-v3.5.2-linux-amd64.tar.gz
--2022-02-21 10:04:46-- https://github.com/coreos/etcd/releases/download/v3.5.2/etcd-v3.5.2-linux-amd64.tar.gz
正在解析主机 github.com (github.com)... 20.205.243.166
正在连接 github.com (github.com)|20.205.243.166|:443... 已连接。
已发出 HTTP 请求，正在等待回应... 301 Moved Permanently
位置：https://github.com/etcd-io/etcd/releases/download/v3.5.2/etcd-v3.5.2-linux-amd64.tar.gz [跟随至新的 URL]
--2022-02-21 10:04:47-- https://github.com/etcd-io/etcd/releases/download/v3.5.2/etcd-v3.5.2-linux-amd64.tar.gz
再次使用存在的到 github.com:443 的连接。
已发出 HTTP 请求，正在等待回应... 302 Found
位置：https://objects.githubusercontent.com/github-production-release-asset-2e65be/11225014/f4f31478-23ee-4680-b2f5-b9c9e6c22c10?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20220221%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20220221T020447Z&X-Amz-Expires=300&X-Amz-Signature=d95f23da1a648ce9ffbf30b90c3ee8dc084ce808c4c2cdb58834f8579af59568&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=11225014&response-content-disposition=attachment%3B%20filename%3Detcd-v3.5.2-linux-amd64.tar.gz&response-content-type=application%2Foctet-stream [跟随至新的 URL]
--2022-02-21 10:04:47-- https://objects.githubusercontent.com/github-production-release-asset-2e65be/11225014/f4f31478-23ee-4680-b2f5-b9c9e6c22c10?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20220221%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20220221T020447Z&X-Amz-Expires=300&X-Amz-Signature=d95f23da1a648ce9ffbf30b90c3ee8dc084ce808c4c2cdb58834f8579af59568&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=11225014&response-content-disposition=attachment%3B%20filename%3Detcd-v3.5.2-linux-amd64.tar.gz&response-content-type=application%2Foctet-stream
正在解析主机 objects.githubusercontent.com (objects.githubusercontent.com)... 185.199.109.133, 185.199.110.133, 185.199.111.133
正在连接 objects.githubusercontent.com (objects.githubusercontent.com)|185.199.109.133|:443... 已连接。
已发出 HTTP 请求，正在等待回应... 200 OK
长度：19403085 (19M) [application/octet-stream]
正在保存至: “etcd-v3.5.2-linux-amd64.tar.gz”
etcd-v3.5.2-linux-amd64.tar.gz 100%[======================================================>] 18.50M 30.3MB/s 用时 0.6s
2022-02-21 10:04:48 (30.3 MB/s) - 已保存 “etcd-v3.5.2-linux-amd64.tar.gz” [19403085/19403085])
[root@k8s-master1 ~]# tar -xvf etcd-v3.5.2-linux-amd64.tar.gz
etcd-v3.5.2-linux-amd64/
etcd-v3.5.2-linux-amd64/etcdutl
etcd-v3.5.2-linux-amd64/Documentation/
etcd-v3.5.2-linux-amd64/Documentation/dev-guide/
etcd-v3.5.2-linux-amd64/Documentation/dev-guide/apispec/
etcd-v3.5.2-linux-amd64/Documentation/dev-guide/apispec/swagger/
etcd-v3.5.2-linux-amd64/Documentation/dev-guide/apispec/swagger/v3election.swagger.json
etcd-v3.5.2-linux-amd64/Documentation/dev-guide/apispec/swagger/v3lock.swagger.json
etcd-v3.5.2-linux-amd64/Documentation/dev-guide/apispec/swagger/rpc.swagger.json
etcd-v3.5.2-linux-amd64/Documentation/README.md
etcd-v3.5.2-linux-amd64/README-etcdutl.md
etcd-v3.5.2-linux-amd64/README-etcdctl.md
etcd-v3.5.2-linux-amd64/etcdctl
etcd-v3.5.2-linux-amd64/etcd
etcd-v3.5.2-linux-amd64/READMEv2-etcdctl.md
etcd-v3.5.2-linux-amd64/README.md
[root@k8s-master1 ~]# cp -p etcd-v3.5.2-linux-amd64/etcd* /usr/local/bin/
[root@k8s-master1 ~]# scp -r etcd-v3.5.2-linux-amd64/etcd* k8s-master2:/usr/local/bin/
etcd 100% 22MB 159.0MB/s 00:00
etcdctl 100% 17MB 170.0MB/s 00:00
etcdutl 100% 15MB 164.7MB/s 00:00
[root@k8s-master1 ~]# scp -r etcd-v3.5.2-linux-amd64/etcd* k8s-master3:/usr/local/bin/
etcd 100% 22MB 145.2MB/s 00:00
etcdctl 100% 17MB 153.2MB/s 00:00
etcdutl 100% 15MB 143.0MB/s 00:00
[root@k8s-master1 ~]#
3.2.2 创建TLS 密钥和证书
为了保证通信安全，客户端(如etcdctl)与etcd 集群、etcd 集群之间的通信需要使用TLS 加密。
创建etcd 证书签名请求：
[root@k8s-master1 ~]# vim etcd-csr.json
[root@k8s-master1 ~]# cat etcd-csr.json
{
"CN": "etcd",
"hosts": [
"127.0.0.1",
"192.168.3.61",
"192.168.3.62",
"192.168.3.63",
"192.168.3.60"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "k8s",
"OU": "system"
}]
}
[root@k8s-master1 ~]# cfssl gencert -ca=/etc/kubernetes/ssl/ca.pem -ca-key=/etc/kubernetes/ssl/ca-key.pem -config=/etc/kubernetes/ssl/ca-config.json -profile=kubernetes etcd-csr.json | cfssljson -bare etcd
2022/02/21 10:23:03 [INFO] generate received request
2022/02/21 10:23:03 [INFO] received CSR
2022/02/21 10:23:03 [INFO] generating key: rsa-2048
2022/02/21 10:23:03 [INFO] encoded CSR
2022/02/21 10:23:03 [INFO] signed certificate with serial number 540683039793068200585882328120306956582063169708
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# ls etcd*.pem
etcd-key.pem etcd.pem
[root@k8s-master1 ~]# mkdir -p /etc/etcd/ssl
[root@k8s-master1 ~]# mv etcd*.pem /etc/etcd/ssl/
[root@k8s-master1 ~]# cp ca*.pem /etc/etcd/ssl/
[root@k8s-master1 ~]# ssh k8s-master2 mkdir -p /etc/etcd/ssl
[root@k8s-master1 ~]# ssh k8s-master3 mkdir -p /etc/etcd/ssl
[root@k8s-master1 ~]# scp /etc/etcd/ssl/* k8s-master2:/etc/etcd/ssl/
ca-key.pem 100% 1679 1.0MB/s 00:00
ca.pem 100% 1310 1.7MB/s 00:00
etcd-key.pem 100% 1679 1.6MB/s 00:00
etcd.pem 100% 1444 1.5MB/s 00:00
[root@k8s-master1 ~]# scp /etc/etcd/ssl/* k8s-master3:/etc/etcd/ssl/
ca-key.pem 100% 1679 1.1MB/s 00:00
ca.pem 100% 1310 1.5MB/s 00:00
etcd-key.pem 100% 1679 2.0MB/s 00:00
etcd.pem 100% 1444 1.9MB/s 00:00
[root@k8s-master1 ~]#
3.2.3 创建配置文件
[root@k8s-master1 ~]# cat /etc/etcd/etcd.conf
#[Member]
ETCD_NAME="etcd1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.3.61:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.3.61:2379,http://127.0.0.1:2379"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.3.61:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.3.61:2379"
ETCD_INITIAL_CLUSTER="etcd1=https://192.168.3.61:2380,etcd2=https://192.168.3.62:2380,etcd3=https://192.168.3.63:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
[root@k8s-master1 ~]# scp /etc/etcd/etcd.conf k8s-master2:/etc/etcd/
etcd.conf 100% 520 457.0KB/s 00:00
[root@k8s-master1 ~]# scp /etc/etcd/etcd.conf k8s-master3:/etc/etcd/
etcd.conf 100% 520 445.7KB/s 00:00
[root@k8s-master1 ~]#
复制到另外两个节点的配置文件需要修改节点名称和IP 切记
- ETCD_NAME：节点名称，集群中唯一
- ETCD_DATA_DIR：数据目录
- ETCD_LISTEN_PEER_URLS：集群通信监听地址
- ETCD_LISTEN_CLIENT_URLS：客户端访问监听地址
- ETCD_INITIAL_ADVERTISE_PEER_URLS：集群通告地址
- ETCD_ADVERTISE_CLIENT_URLS：客户端通告地址
- ETCD_INITIAL_CLUSTER：集群节点地址
- ETCD_INITIAL_CLUSTER_TOKEN：集群Token
- ETCD_INITIAL_CLUSTER_STATE：加入集群的当前状态，new是新集群，existing表示加入已有集群
创建完配置文件顺便把数据目录也创建上
[root@k8s-master1 ~]# mkdir -p /var/lib/etcd/default.etcd
[root@k8s-master1 ~]# ssh k8s-master2 mkdir -p /var/lib/etcd/default.etcd
[root@k8s-master1 ~]# ssh k8s-master3 mkdir -p /var/lib/etcd/default.etcd
3.2.4 创建systemd unit文件
[root@k8s-master1 ~]# vim etcd.service
[root@k8s-master1 ~]# cat etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
EnvironmentFile=-/etc/etcd/etcd.conf
WorkingDirectory=/var/lib/etcd/
ExecStart=/usr/local/bin/etcd \
--cert-file=/etc/etcd/ssl/etcd.pem \
--key-file=/etc/etcd/ssl/etcd-key.pem \
--trusted-ca-file=/etc/etcd/ssl/ca.pem \
--peer-cert-file=/etc/etcd/ssl/etcd.pem \
--peer-key-file=/etc/etcd/ssl/etcd-key.pem \
--peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \
--peer-client-cert-auth \
--client-cert-auth
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
[root@k8s-master1 ~]# cp etcd.service /usr/lib/systemd/system/
[root@k8s-master1 ~]# scp etcd.service k8s-master2:/usr/lib/systemd/system/
etcd.service 100% 635 587.5KB/s 00:00
[root@k8s-master1 ~]# scp etcd.service k8s-master3:/usr/lib/systemd/system/
etcd.service 100% 635 574.7KB/s 00:00
[root@k8s-master1 ~]#
3.2.5 启动etcd
在所有节点上都执行
可以先执行
systemctl daemon-reload
systemctl enable etcd.service然后执行
systemctl start etcd
[root@k8s-master1 ~]# systemctl daemon-reload
[root@k8s-master1 ~]# systemctl enable etcd.service
Created symlink /etc/systemd/system/multi-user.target.wants/etcd.service → /usr/lib/systemd/system/etcd.service.
[root@k8s-master1 ~]# ^C
[root@k8s-master1 ~]# systemctl start etcd
[root@k8s-master1 ~]# systemctl status etcd
● etcd.service - Etcd Server
Loaded: loaded (/usr/lib/systemd/system/etcd.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-02-21 10:56:59 CST; 10s ago
Main PID: 112245 (etcd)
Tasks: 9 (limit: 23502)
Memory: 26.0M
CGroup: /system.slice/etcd.service
└─112245 /usr/local/bin/etcd --cert-file=/etc/etcd/ssl/etcd.pem --key-file=/etc/etcd/ssl/etcd-key.pem --trusted-ca->
2月 21 10:57:01 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:01.473+0800","caller":"rafthttp/peer_status.g>
2月 21 10:57:01 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:01.473+0800","caller":"rafthttp/stream.go:274>
2月 21 10:57:01 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:01.473+0800","caller":"rafthttp/stream.go:249>
2月 21 10:57:01 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:01.473+0800","caller":"rafthttp/stream.go:274>
2月 21 10:57:01 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:01.484+0800","caller":"etcdserver/server.go:7>
2月 21 10:57:01 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:01.484+0800","caller":"rafthttp/stream.go:412>
2月 21 10:57:01 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:01.484+0800","caller":"rafthttp/stream.go:412>
2月 21 10:57:03 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:03.798+0800","caller":"etcdserver/server.go:2>
2月 21 10:57:03 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:03.799+0800","caller":"membership/cluster.go:>
2月 21 10:57:03 k8s-master1 etcd[112245]: {"level":"info","ts":"2022-02-21T10:57:03.793.2.6 验证集群
部署完etcd 集群后，在任一etcd 节点上执行下面命令，提示is healthy则表示正常
[root@k8s-master1 ~]# for ip in 192.168.3.61 192.168.3.62 192.168.3.63; do
> ETCDCTL_API=3 /usr/local/bin/etcdctl \
> --endpoints=https://${ip}:2379 \
> --cacert=/etc/etcd/ssl/ca.pem \
> --cert=/etc/etcd/ssl/etcd.pem \
> --key=/etc/etcd/ssl/etcd-key.pem \
> endpoint health; done
https://192.168.3.61:2379 is healthy: successfully committed proposal: took = 7.41116ms
https://192.168.3.62:2379 is healthy: successfully committed proposal: took = 9.36961ms
https://192.168.3.63:2379 is healthy: successfully committed proposal: took = 8.957572ms
3.3 安装K8s组件
3.3.1 下载二进制包
可以去github下载最新版本
kubernetes/CHANGELOG at master · kubernetes/kubernetes · GitHub
解压并复制到对应的节点上
[root@k8s-master1 ~]# wget https://storage.googleapis.com/kubernetes-release/release/v1.23.4/kubernetes-server-linux-amd64.tar.gz -O kubernetes-server-linux-amd64.tar.gz
--2022-02-21 11:39:09-- https://storage.googleapis.com/kubernetes-release/release/v1.23.4/kubernetes-server-linux-amd64.tar.gz
正在解析主机 storage.googleapis.com (storage.googleapis.com)... 142.251.43.16, 172.217.160.112, 172.217.160.80
正在连接 storage.googleapis.com (storage.googleapis.com)|142.251.43.16|:443... 已连接。
已发出 HTTP 请求，正在等待回应... 200 OK
长度：341392468 (326M) [application/x-tar]
正在保存至: “kubernetes-server-linux-amd64.tar.gz”
kubernetes-server-linux-amd64.t 100%[======================================================>] 325.58M 14.3MB/s 用时 24s
2022-02-21 11:39:34 (13.5 MB/s) - 已保存 “kubernetes-server-linux-amd64.tar.gz” [341392468/341392468])
[root@k8s-master1 ~]# tar zxvf kubernetes-server-linux-amd64.tar.gz
kubernetes/
kubernetes/server/
kubernetes/server/bin/
kubernetes/server/bin/kube-apiserver.tar
kubernetes/server/bin/kube-controller-manager.tar
。。。 。。。
[root@k8s-master1 ~]# cd kubernetes/server/bin/
[root@k8s-master1 bin]# ls
apiextensions-apiserver kube-apiserver.tar kubectl-convert kube-proxy.tar
kubeadm kube-controller-manager kubelet kube-scheduler
kube-aggregator kube-controller-manager.docker_tag kube-log-runner kube-scheduler.docker_tag
kube-apiserver kube-controller-manager.tar kube-proxy kube-scheduler.tar
kube-apiserver.docker_tag kubectl kube-proxy.docker_tag mounter
[root@k8s-master1 bin]# cp kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/
[root@k8s-master1 bin]# scp kube-apiserver kube-controller-manager kube-scheduler kubectl k8s-master2:/usr/local/bin
kube-apiserver 100% 125MB 87.6MB/s 00:01
kube-controller-manager 100% 116MB 129.0MB/s 00:00
kube-scheduler 100% 47MB 114.0MB/s 00:00
kubectl 100% 44MB 123.6MB/s 00:00
[root@k8s-master1 bin]# scp kube-apiserver kube-controller-manager kube-scheduler kubectl k8s-master3:/usr/local/bin
kube-apiserver 100% 125MB 137.7MB/s 00:00
kube-controller-manager 100% 116MB 147.2MB/s 00:00
kube-scheduler 100% 47MB 148.0MB/s 00:00
kubectl 100% 44MB 133.8MB/s 00:00
[root@k8s-master1 bin]# scp kubelet kube-proxy k8s-node1:/usr/local/bin/
kubelet 100% 119MB 165.2MB/s 00:00
kube-proxy 100% 42MB 143.0MB/s 00:00
[root@k8s-master1 bin]# scp kubelet kube-proxy k8s-node2:/usr/local/bin/
kubelet 100% 119MB 146.0MB/s 00:00
kube-proxy 100% 42MB 134.1MB/s 00:00
[root@k8s-master1 bin]#
3.3.2 部署apiserver
TLS Bootstrapping 机制
Master apiserver启用TLS认证后，每个节点的 kubelet 组件都要使用由 apiserver 使用的 CA 签发的有效证书才能与 apiserver 通讯，当Node节点很多时，这种客户端证书颁发需要大量工作，同样也会增加集群扩展复杂度。
为了简化流程，Kubernetes引入了TLS bootstraping机制来自动颁发客户端证书，kubelet会以一个低权限用户自动向apiserver申请证书，kubelet的证书由apiserver动态签署。
TLS bootstrapping 具体引导过程
1.TLS 作用
TLS 的作用就是对通讯加密，防止中间人窃听；同时如果证书不信任的话根本就无法与 apiserver 建立连接，更不用提有没有权限向apiserver请求指定内容。
2. RBAC 作用
当 TLS 解决了通讯问题后，那么权限问题就应由 RBAC 解决(可以使用其他权限模型，如 ABAC)；RBAC 中规定了一个用户或者用户组(subject)具有请求哪些 api 的权限；在配合 TLS 加密的时候，实际上 apiserver 读取客户端证书的 CN 字段作为用户名，读取 O字段作为用户组.
以上说明：第一，想要与 apiserver 通讯就必须采用由 apiserver CA 签发的证书，这样才能形成信任关系，建立 TLS 连接；第二，可以通过证书的 CN、O 字段来提供 RBAC 所需的用户与用户组。kubelet 首次启动流程
TLS bootstrapping 功能是让 kubelet 组件去 apiserver 申请证书，然后用于连接 apiserver；那么第一次启动时没有证书如何连接 apiserver ?
在apiserver 配置中指定了一个 token.csv 文件，该文件中是一个预设的用户配置；同时该用户的Token和由apiserver的CA签发的用户被写入了kubelet 所使用的bootstrap.kubeconfig 配置文件中；这样在首次请求时，kubelet 使用 bootstrap.kubeconfig 中被 apiserver CA 签发证书时信任的用户来与 apiserver 建立 TLS 通讯，使用 bootstrap.kubeconfig 中的用户 Token 来向 apiserver 声明自己的 RBAC 授权身份.token.csv格式:3940fd7fbb391d1b4d861ad17a1f0613,kubelet-bootstrap,10001,"system:kubelet-bootstrap"
首次启动时，可能与遇到 kubelet 报 401 无权访问 apiserver 的错误；这是因为在默认情况下，kubelet 通过 bootstrap.kubeconfig 中的预设用户 Token 声明了自己的身份，然后创建 CSR 请求；但是不要忘记这个用户在我们不处理的情况下他没任何权限的，包括创建 CSR 请求；所以需要创建一个 ClusterRoleBinding，将预设用户 kubelet-bootstrap 与内置的 ClusterRole system:node-bootstrapper 绑定到一起，使其能够发起 CSR 请求。
创建token.csv文件
[root@k8s-master1 ~]# cat > token.csv << EOF
> $(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:kubelet-bootstrap"
> EOF
[root@k8s-master1 ~]# cat token.csv
3609f8980544889a3224dc8c57954976,kubelet-bootstrap,10001,"system:kubelet-bootstrap"
创建csr请求文件
[root@k8s-master1 ~]# vim kube-apiserver-csr.json
[root@k8s-master1 ~]# cat kube-apiserver-csr.json
{
"CN": "kubernetes",
"hosts": [
"127.0.0.1",
"192.168.3.60",
"192.168.3.61",
"192.168.3.62",
"192.168.3.63",
"192.168.3.64",
"192.168.3.65",
"10.255.0.1",
"kubernetes",
"kubernetes.default",
"kubernetes.default.svc",
"kubernetes.default.svc.cluster",
"kubernetes.default.svc.cluster.local"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "k8s",
"OU": "system"
}
]
[root@k8s-master1 ~]#
# 10.255.0.1 kubernetes 服务IP(预先分配，一般为svc地址中的第一个IP)
# svc.cluster.local 如果不想用这个也可以修改
生成证书
[root@k8s-master1 ~]# cfssl gencert -ca=/etc/kubernetes/ssl/ca.pem -ca-key=/etc/kubernetes/ssl/ca-key.pem -config=/etc/kubernetes/ssl/ca-config.json -profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver
2022/02/21 12:16:40 [INFO] generate received request
2022/02/21 12:16:40 [INFO] received CSR
2022/02/21 12:16:40 [INFO] generating key: rsa-2048
2022/02/21 12:16:40 [INFO] encoded CSR
2022/02/21 12:16:40 [INFO] signed certificate with serial number 99077620124943441155416266615920435310043288274
创建api-server的配置文件
[root@k8s-master1 ~]# vim kube-apiserver.conf
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# cat kube-apiserver.conf
KUBE_APISERVER_OPTS="
--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \
--anonymous-auth=false \
--bind-address=192.168.3.61 \
--secure-port=6443 \
--advertise-address=192.168.3.61 \
--insecure-port=0 \
--authorization-mode=Node,RBAC \
--runtime-config=api/all=true \
--enable-bootstrap-token-auth \
--service-cluster-ip-range=10.255.0.0/16 \
--token-auth-file=/etc/kubernetes/token.csv \
--service-node-port-range=30000-50000 \
--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem \
--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \
--client-ca-file=/etc/kubernetes/ssl/ca.pem \
--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \
--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \
--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \
--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
--service-account-issuer=https://kubernetes.default.svc.cluster.local \
--etcd-cafile=/etc/etcd/ssl/ca.pem \
--etcd-certfile=/etc/etcd/ssl/etcd.pem \
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \
--etcd-servers=https://192.168.3.61:2379,https://192.168.3.62:2379,https://192.168.3.63:2379 \
--enable-swagger-ui=true \
--allow-privileged=true \
--apiserver-count=3 \
--audit-log-maxage=30 \
--audit-log-maxbackup=3 \
--audit-log-maxsize=100 \
--audit-log-path=/var/log/kube-apiserver-audit.log \
--event-ttl=1h \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=4"
--logtostderr：启用日志
--v：日志等级
--log-dir：日志目录
--etcd-servers：etcd集群地址
--bind-address：监听地址
--secure-port：https安全端口
--advertise-address：集群通告地址
--allow-privileged：启用授权
--service-cluster-ip-range：Service虚拟IP地址段
--enable-admission-plugins：准入控制模块
--authorization-mode：认证授权，启用RBAC授权和节点自管理
--enable-bootstrap-token-auth：启用TLS bootstrap机制
--token-auth-file：bootstrap token文件
--service-node-port-range：Service nodeport类型默认分配端口范围
--kubelet-client-xxx：apiserver访问kubelet客户端证书
--tls-xxx-file：apiserver https证书
--etcd-xxxfile：连接Etcd集群证书 –
-audit-log-xxx：审计日志
创建kube-apiserver 的systemd unit文件
[root@k8s-master1 ~]# vim kube-apiserver.service
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# cat kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=etcd.service
Wants=etcd.service
[Service]
EnvironmentFile=-/etc/kubernetes/kube-apiserver.conf
ExecStart=/usr/local/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure
[root@k8s-master1 ~]#
分发apiserver的证书、配置文件、systemd
修改另外节点的配置文件，master2和master3的apiserver.conf中的IP
[root@k8s-master1 ~]# cp kube-apiserver*.pem /etc/kubernetes/ssl/
[root@k8s-master1 ~]# cp token.csv /etc/kubernetes/
[root@k8s-master1 ~]# cp kube-apiserver.conf /etc/kubernetes/
[root@k8s-master1 ~]# cp kube-apiserver.service /usr/lib/systemd/system/
[root@k8s-master1 ~]# scp kube-apiserver*.pem k8s-master2:/etc/kubernetes/ssl/
kube-apiserver-key.pem 100% 1679 1.7MB/s 00:00
kube-apiserver.pem 100% 1606 2.3MB/s 00:00
[root@k8s-master1 ~]# scp kube-apiserver*.pem k8s-master3:/etc/kubernetes/ssl/
kube-apiserver-key.pem 100% 1679 1.5MB/s 00:00
kube-apiserver.pem 100% 1606 2.1MB/s 00:00
[root@k8s-master1 ~]# scp token.csv kube-apiserver.conf k8s-master3:/etc/kubernetes/
token.csv 100% 84 55.8KB/s 00:00
kube-apiserver.conf 100% 1610 1.9MB/s 00:00
[root@k8s-master1 ~]# scp token.csv kube-apiserver.conf k8s-master2:/etc/kubernetes/
token.csv 100% 84 54.6KB/s 00:00
kube-apiserver.conf 100% 1610 1.7MB/s 00:00
[root@k8s-master1 ~]# scp kube-apiserver.service k8s-master2:/usr/lib/systemd/system/
kube-apiserver.service 100% 280 268.9KB/s 00:00
[root@k8s-master1 ~]# scp kube-apiserver.service k8s-master3:/usr/lib/systemd/system/
kube-apiserver.service 100% 280 273.9KB/s 00:00
[root@k8s-master1 ~]#
启动kube-apiserver
三个节点都需要执行
[root@k8s-master1 ~]# systemctl daemon-reload
[root@k8s-master1 ~]# systemctl enable kube-apiserver
The unit files have no installation config (WantedBy, RequiredBy, Also, Alias
settings in the [Install] section, and DefaultInstance for template units).
This means they are not meant to be enabled using systemctl.
Possible reasons for having this kind of units are:
1) A unit may be statically enabled by being symlinked from another unit's
.wants/ or .requires/ directory.
2) A unit's purpose may be to act as a helper for some other unit which has
a requirement dependency on it.
3) A unit may be started when needed via activation (socket, path, timer,
D-Bus, udev, scripted systemctl call, ...).
4) In case of template units, the unit is meant to be enabled with some
instance name specified.
[root@k8s-master1 ~]# systemctl start kube-apiserver
[root@k8s-master1 ~]# systemctl status kube-apiserver
● kube-apiserver.service - Kubernetes API Server
Loaded: loaded (/usr/lib/systemd/system/kube-apiserver.service; static; vendor preset: disabled)
Active: active (running) since Mon 2022-02-21 12:39:09 CST; 13s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 147142 (kube-apiserver)
Tasks: 12 (limit: 23502)
Memory: 264.4M
CGroup: /system.slice/kube-apiserver.service
└─147142 /usr/local/bin/kube-apiserver --enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,Se>
2月 21 12:39:13 k8s-master1 kube-apiserver[147142]: I0221 12:39:13.591795 147142 httplog.go:129] "HTTP" verb="GET" URI="/api/>
2月 21 12:39:13 k8s-master1 kube-apiserver[147142]: I0221 12:39:13.598945 147142 alloc.go:329] "3.3.3 安装kubectl工具
Kubectl是客户端工具，操作k8s资源的，如增删改查等。
Kubectl操作资源的时候，默认先找KUBECONFIG，如果没有KUBECONFIG变量，那就会使用~/.kube/config
可以设置一个环境变量KUBECONFIG
[root@ xianchaomaster1 ~]# export KUBECONFIG =/etc/kubernetes/admin.conf
这样在操作kubectl，就会自动加载KUBECONFIG来操作要管理哪个集群的k8s资源了
也可以按照下面方法
[root@ xianchaomaster1 ~]# cp /etc/kubernetes/admin.conf ~/.kube/config
这样我们在执行kubectl，就会加载~/.kube/config文件操作k8s资源了
创建csr请求文件
[root@k8s-master1 ~]# vim admin-csr.json
[root@k8s-master1 ~]# cat admin-csr.json
{
"CN": "admin",
"hosts": [],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:masters",
"OU": "system"
}
]
}
生成证书
[root@k8s-master1 ~]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin
2022/02/21 12:53:07 [INFO] generate received request
2022/02/21 12:53:07 [INFO] received CSR
2022/02/21 12:53:07 [INFO] generating key: rsa-2048
2022/02/21 12:53:07 [INFO] encoded CSR
2022/02/21 12:53:07 [INFO] signed certificate with serial number 421998404594641165147193284791210831952845769831
2022/02/21 12:53:07 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").
[root@k8s-master1 ~]# cp admin*.pem /etc/kubernetes/ssl/
[root@k8s-master1 ~]#
创建kubeconfig配置文件
[root@k8s-master1 ~]# kubectl config set-cluster kubernetes --certificate-authority=/etc/kubernetes/ssl/ca.pem --embed-certs=true --server=https://192.168.3.61:6443 --kubeconfig=kube.config
Cluster "kubernetes" set.
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# cat kube.config
apiVersion: v1
clusters:
- cluster:
certificate-authority-data: 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
server: https://192.168.3.61:6443
name: kubernetes
contexts: null
current-context: ""
kind: Config
preferences: {}
users: null
[root@k8s-master1 ~]#
设置客户端认证参数
--创建kubectl使用的用户admin，并指定了刚创建的证书和config
[root@k8s-master1 ~]# kubectl config set-credentials admin --client-certificate=/etc/kubernetes/ssl/admin.pem --client-key=/etc/kubernetes/ssl/admin-key.pem --embed-certs=true --kubeconfig=kube.config
User "admin" set.
配置安全上下文
[root@k8s-master1 ~]# kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=kube.config #添加上下文
Context "kubernetes" created.
[root@k8s-master1 ~]# kubectl config use-context kubernetes --kubeconfig=kube.config #把刚添加的上下文设置成当前上下文，等同于切换上下文
Switched to context "kubernetes".
[root@k8s-master1 ~]# mkdir ~/.kube -p
[root@k8s-master1 ~]# cp kube.config ~/.kube/config
[root@k8s-master1 ~]# kubectl cluster-info
Kubernetes control plane is running at https://192.168.3.61:6443
[root@k8s-master1 ~]# kubectl get ns
NAME STATUS AGE
default Active 44m
kube-node-lease Active 44m
kube-public Active 44m
kube-system Active 44m
[root@k8s-master1 ~]# kubectl get componentstatuses
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME STATUS MESSAGE ERROR
controller-manager Unhealthy Get "https://127.0.0.1:10257/healthz": dial tcp 127.0.0.1:10257: connect: connection refused
scheduler Unhealthy Get "https://127.0.0.1:10259/healthz": dial tcp 127.0.0.1:10259: connect: connection refused
etcd-0 Healthy {"health":"true","reason":""}
etcd-1 Healthy {"health":"true","reason":""}
etcd-2 Healthy {"health":"true","reason":""}
复制kubectl配置
以后想用哪台机器管理集群，就把配置复制到哪里
[root@k8s-master1 ~]# ssh k8s-master2 mkdir ~/.kube
[root@k8s-master1 ~]# ssh k8s-master3 mkdir ~/.kube
[root@k8s-master1 ~]# scp ~/.kube/config k8s-master2:/root/.kube/
config 100% 6200 6.4MB/s 00:00
[root@k8s-master1 ~]# scp ~/.kube/config k8s-master3:/root/.kube/
config 100% 6200 3.4MB/s 00:00
[root@k8s-master1 ~]#
设置自动补全命令
[root@k8s-master1 ~]# yum install -y bash-completion
安装:
bash-completion noarch 1:2.7-5.el8 base 274 k
已安装:
bash-completion-1:2.7-5.el8.noarch
完毕！
[root@k8s-master1 ~]# source <(kubectl completion bash)
[root@k8s-master1 ~]# echo "source <(kubectl completion bash)" >> ~/.bashrc
[root@k8s-master1 ~]#
3.3.4 部署kube-controller-manager
创建csr请求文件
[root@k8s-master1 ~]# cat kube-controller-manager-csr.json
{
"CN": "system:kube-controller-manager",
"key": {
"algo": "rsa",
"size": 2048
},
"hosts": [
"127.0.0.1",
"192.168.3.60",
"192.168.3.61",
"192.168.3.62",
"192.168.3.63"
],
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:kube-controller-manager",
"OU": "system"
}
]
}
生成证书
[root@k8s-master1 ~]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager
2022/02/21 14:43:33 [INFO] generate received request
2022/02/21 14:43:33 [INFO] received CSR
2022/02/21 14:43:33 [INFO] generating key: rsa-2048
2022/02/21 14:43:33 [INFO] encoded CSR
2022/02/21 14:43:33 [INFO] signed certificate with serial number 496802849408140383404002518878408986795206976819
[root@k8s-master1 ~]#
创建kube-controller-manager的kubeconfig
[root@k8s-master1 ~]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.3.61:6443 --kubeconfig=kube-controller-manager.kubeconfig # 添加配置
Cluster "kubernetes" set.
[root@k8s-master1 ~]# kubectl config set-credentials system:kube-controller-manager --client-certificate=kube-controller-manager.pem --client-key=kube-controller-manager-key.pem --embed-certs=true --kubeconfig=kube-controller-manager.kubeconfig #创建用户
User "system:kube-controller-manager" set.
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# kubectl config set-context system:kube-controller-manager --cluster=kubernetes --user=system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig #添加上下文
Context "system:kube-controller-manager" created.
[root@k8s-master1 ~]# kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig #切换上下文
Switched to context "system:kube-controller-manager".
创建配置文件kube-controller-manager.conf
[root@k8s-master1 ~]# vim kube-controller-manager.conf
[root@k8s-master1 ~]# cat kube-controller-manager.conf
KUBE_CONTROLLER_MANAGER_OPTS="
--secure-port=10257 \
--bind-address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \
--service-cluster-ip-range=10.255.0.0/16 \
--cluster-name=kubernetes \
--cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem \
--cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
--allocate-node-cidrs=true \
--cluster-cidr=10.0.0.0/16 \
--experimental-cluster-signing-duration=87600h \
--root-ca-file=/etc/kubernetes/ssl/ca.pem \
--service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem \
--leader-elect=true \
--feature-gates=RotateKubeletServerCertificate=true \
--controllers=*,bootstrapsigner,tokencleaner \
--horizontal-pod-autoscaler-use-rest-clients=true \
--horizontal-pod-autoscaler-sync-period=10s \
--tls-cert-file=/etc/kubernetes/ssl/kube-controller-manager.pem \
--tls-private-key-file=/etc/kubernetes/ssl/kube-controller-manager-key.pem \
--use-service-account-credentials=true \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2"
创建systemd unit启动文件
[root@k8s-master1 ~]# cat kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/kube-controller-manager.conf
ExecStart=/usr/local/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
分发配置
[root@k8s-master1 ~]# cp kube-controller-manager*.pem /etc/kubernetes/ssl/
[root@k8s-master1 ~]# cp kube-controller-manager.kubeconfig kube-controller-manager.conf /etc/kubernetes/
[root@k8s-master1 ~]# cp kube-controller-manager.service /usr/lib/systemd/system/
[root@k8s-master1 ~]# scp kube-controller-manager*.pem k8s-master2:/etc/kubernetes/ssl/
kube-controller-manager-key.pem 100% 1675 1.6MB/s 00:00
kube-controller-manager.pem 100% 1517 1.5MB/s 00:00
[root@k8s-master1 ~]# scp kube-controller-manager*.pem k8s-master3:/etc/kubernetes/ssl/
kube-controller-manager-key.pem 100% 1675 401.7KB/s 00:00
kube-controller-manager.pem 100% 1517 2.0MB/s 00:00
[root@k8s-master1 ~]# scp kube-controller-manager.kubeconfig kube-controller-manager.conf k8s-master3:/etc/kubernetes/
kube-controller-manager.kubeconfig 100% 6442 5.8MB/s 00:00
kube-controller-manager.conf 100% 1103 1.2MB/s 00:00
[root@k8s-master1 ~]# scp kube-controller-manager.kubeconfig kube-controller-manager.conf k8s-master2:/etc/kubernetes/
kube-controller-manager.kubeconfig 100% 6442 6.8MB/s 00:00
kube-controller-manager.conf 100% 1103 1.5MB/s 00:00
[root@k8s-master1 ~]# scp kube-controller-manager.service k8s-master3:/usr/lib/systemd/system/
kube-controller-manager.service 100% 325 337.5KB/s 00:00
[root@k8s-master1 ~]# scp kube-controller-manager.service k8s-master2:/usr/lib/systemd/system/
kube-controller-manager.service 100% 325 260.6KB/s 00:00
[root@k8s-master1 ~]#
启动服务
三个节点都要执行
[root@k8s-master1 ~]# systemctl daemon-reload
[root@k8s-master1 ~]# systemctl enable kube-controller-manager
Created symlink /etc/systemd/system/multi-user.target.wants/kube-controller-manager.service → /usr/lib/systemd/system/kube-controller-manager.service.
[root@k8s-master1 ~]# systemctl start kube-controller-manager
[root@k8s-master1 ~]# systemctl status kube-controller-manager
● kube-controller-manager.service - Kubernetes Controller Manager
Loaded: loaded (/usr/lib/systemd/system/kube-controller-manager.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-02-21 15:08:30 CST; 4s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 201388 (kube-controller)
Tasks: 7 (limit: 23502)
Memory: 22.2M
CGroup: /system.slice/kube-controller-manager.service
└─201388 /usr/local/bin/kube-controller-manager --port=0 --secure-port=10252 --bind-address=127.0.0.1 --kubeconfig=>
2月 21 15:08:30 k8s-master1 kube-controller-manager[201388]: W0221 15:08:30.640107 201388 authentication.go:316] No authentic>
2月 21 15:08:30 k8s-master1 kube-controller-manager[201388]: W0221 15
Error: unknown flag: --horizontal-pod-autoscaler-use-rest-clients1.23的kube-controller-manager不再支持这个参数。
kube-controller-manager.conf中去掉后重启即可
3.3.5 部署kube-scheduler组件
创建csr
[root@k8s-master1 ~]# vim kube-scheduler-csr.json
[root@k8s-master1 ~]# cat kube-scheduler-csr.json
{
"CN": "system:kube-scheduler",
"hosts": [
"127.0.0.1",
"192.168.3.60",
"192.168.3.61",
"192.168.3.62",
"192.168.3.63"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:kube-scheduler",
"OU": "system"
}
]
}
生成证书
[root@k8s-master1 ~]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler
2022/02/21 15:21:14 [INFO] generate received request
2022/02/21 15:21:14 [INFO] received CSR
2022/02/21 15:21:14 [INFO] generating key: rsa-2048
2022/02/21 15:21:14 [INFO] encoded CSR
2022/02/21 15:21:14 [INFO] signed certificate with serial number 511389872259561079962075349736953558613113264353
创建kube-scheduler的kubeconfig
[root@k8s-master1 ~]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.3.61:6443 --kubeconfig=kube-scheduler.kubeconfig
Cluster "kubernetes" set.
[root@k8s-master1 ~]# kubectl config set-credentials system:kube-scheduler --client-certificate=kube-scheduler.pem --client-key=kube-scheduler-key.pem --embed-certs=true --kubeconfig=kube-scheduler.kubeconfig
User "system:kube-scheduler" set.
[root@k8s-master1 ~]# kubectl config set-context system:kube-scheduler --cluster=kubernetes --user=system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig
Context "system:kube-scheduler" created.
[root@k8s-master1 ~]# kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig
Switched to context "system:kube-scheduler".
[root@k8s-master1 ~]#
创建配置文件kube-scheduler.conf
[root@k8s-master1 ~]# vim kube-scheduler.conf
[root@k8s-master1 ~]# cat kube-scheduler.conf
KUBE_SCHEDULER_OPTS="--address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \
--leader-elect=true \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2"
创建systemd unit服务启动文件
[root@k8s-master1 ~]# vim kube-scheduler.service
[root@k8s-master1 ~]# cat kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/kube-scheduler.conf
ExecStart=/usr/local/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
分发配置
[root@k8s-master1 ~]# cp kube-scheduler*.pem /etc/kubernetes/ssl/
[root@k8s-master1 ~]# cp kube-scheduler.kubeconfig kube-scheduler.conf /etc/kubernetes/
[root@k8s-master1 ~]# cp kube-scheduler.service /usr/lib/systemd/system/
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# scp kube-scheduler*.pem k8s-master2:/etc/kubernetes/ssl/
kube-scheduler-key.pem 100% 1679 1.5MB/s 00:00
kube-scheduler.pem 100% 1493 1.9MB/s 00:00
[root@k8s-master1 ~]# scp kube-scheduler*.pem k8s-master3:/etc/kubernetes/ssl/
kube-scheduler-key.pem 100% 1679 1.5MB/s 00:00
kube-scheduler.pem 100% 1493 1.4MB/s 00:00
[root@k8s-master1 ~]# scp kube-scheduler.kubeconfig kube-scheduler.conf k8s-master2:/etc/kubernetes/
kube-scheduler.kubeconfig 100% 6378 5.4MB/s 00:00
kube-scheduler.conf 100% 209 248.9KB/s 00:00
[root@k8s-master1 ~]# scp kube-scheduler.kubeconfig kube-scheduler.conf k8s-master3:/etc/kubernetes/
kube-scheduler.kubeconfig 100% 6378 4.5MB/s 00:00
kube-scheduler.conf 100% 209 284.2KB/s 00:00
[root@k8s-master1 ~]# scp kube-scheduler.service k8s-master2:/usr/lib/systemd/system/
kube-scheduler.service 100% 293 192.4KB/s 00:00
[root@k8s-master1 ~]# scp kube-scheduler.service k8s-master3:/usr/lib/systemd/system/
kube-scheduler.service 100% 293 224.3KB/s 00:00
[root@k8s-master1 ~]#
启动服务
三个节点都要执行
[root@k8s-master1 ~]# systemctl daemon-reload
[root@k8s-master1 ~]# systemctl enable kube-scheduler
Created symlink /etc/systemd/system/multi-user.target.wants/kube-scheduler.service → /usr/lib/systemd/system/kube-scheduler.service.
[root@k8s-master1 ~]# systemctl start kube-scheduler
[root@k8s-master1 ~]# systemctl status kube-scheduler
● kube-scheduler.service - Kubernetes Scheduler
Loaded: loaded (/usr/lib/systemd/system/kube-scheduler.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-02-21 15:29:49 CST; 5s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 208525 (kube-scheduler)
Tasks: 9 (limit: 23502)
Memory: 13.8M
CGroup: /system.slice/kube-scheduler.service
└─208525 /usr/local/bin/kube-scheduler --address=127.0.0.1 --kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig ->
2月 21 15:29:50 k8s-master1 kube-scheduler[208525]: score: {}
2月 21 15:29:50 k8s-master1 kube-scheduler[208525]: schedulerName: default-scheduler
2月 21 15:29:50 k8s-master1 kube-scheduler[208525]: ------------------------------------Configuration File Contents End Here-->
2月 21 15:29:50 k8s-master1 kube-scheduler[208525]: I0221 15:29:50.081000 208525 server.go:139] "Starting Kubernetes Schedule>
2月 21 15:29:50 k8s-master1 kube-scheduler[208525]: I0221 15:29:50.082408 208525 tlsconfig.go:200] "Loaded serving cert" cert>
2月 21 15:29:50 k8s-master1 kube-scheduler[208525]: I0221 15:29:50.082[root@k8s-master1 ~]# kubectl get componentstatuses
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-2 Healthy {"health":"true","reason":""}
etcd-1 Healthy {"health":"true","reason":""}
etcd-0 Healthy {"health":"true","reason":""}
3.3.6 安装kubelet
创建kubelet-bootstrap.kubeconfig
[root@k8s-master1 ~]# BOOTSTRAP_TOKEN=$(awk -F "," '{print $1}' /etc/kubernetes/token.csv)
[root@k8s-master1 ~]# echo $BOOTSTRAP_TOKEN
3609f8980544889a3224dc8c57954976
[root@k8s-master1 ~]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.3.61:6443 --kubeconfig=kubelet-bootstrap.kubeconfig
Cluster "kubernetes" set.
[root@k8s-master1 ~]# kubectl config set-credentials kubelet-bootstrap --token=${BOOTSTRAP_TOKEN} --kubeconfig=kubelet-bootstrap.kubeconfig
User "kubelet-bootstrap" set.
[root@k8s-master1 ~]# kubectl config set-context default --cluster=kubernetes --user=kubelet-bootstrap --kubeconfig=kubelet-bootstrap.kubeconfig
Context "default" created.
[root@k8s-master1 ~]# kubectl config use-context default --kubeconfig=kubelet-bootstrap.kubeconfig
Switched to context "default".
[root@k8s-master1 ~]# kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap
clusterrolebinding.rbac.authorization.k8s.io/kubelet-bootstrap created
[root@k8s-master1 ~]#
创建配置文件kubelet.json
[root@k8s-master1 ~]# vim kubelet.json
[root@k8s-master1 ~]# cat kubelet.json
{
"kind": "KubeletConfiguration",
"apiVersion": "kubelet.config.k8s.io/v1beta1",
"authentication": {
"x509": {
"clientCAFile": "/etc/kubernetes/ssl/ca.pem"
},
"webhook": {
"enabled": true,
"cacheTTL": "2m0s"
},
"anonymous": {
"enabled": false
}
},
"authorization": {
"mode": "Webhook",
"webhook": {
"cacheAuthorizedTTL": "5m0s",
"cacheUnauthorizedTTL": "30s"
}
},
"address": "192.168.3.61",
"port": 10250,
"readOnlyPort": 10255,
"cgroupDriver": "systemd",
"hairpinMode": "promiscuous-bridge",
"serializeImagePulls": false,
"clusterDomain": "cluster.local.",
"clusterDNS": ["10.255.0.2"]
}
创建systemd unit 服务启动文件
[root@k8s-master1 ~]# vim kubelet.service
[root@k8s-master1 ~]# cat kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/usr/local/bin/kubelet \
--bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig \
--cert-dir=/etc/kubernetes/ssl \
--kubeconfig=/etc/kubernetes/kubelet.kubeconfig \
--config=/etc/kubernetes/kubelet.json \
--network-plugin=cni \
--pod-infra-container-image=kubernetes/pause \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
分发kubelet相关配置
分发到node节点上
[root@k8s-master1 ~]# ssh k8s-node1 mkdir -p /etc/kubernetes/ssl
[root@k8s-master1 ~]# scp kubelet-bootstrap.kubeconfig kubelet.json k8s-node1:/etc/kubernetes/
kubelet-bootstrap.kubeconfig 100% 2102 1.4MB/s 00:00
kubelet.json 100% 802 1.1MB/s 00:00
[root@k8s-master1 ~]# scp ca.pem k8s-node1:/etc/kubernetes/ssl/
ca.pem 100% 1310 1.4MB/s 00:00
[root@k8s-master1 ~]# scp kubelet.service k8s-node1:/usr/lib/systemd/system/
kubelet.service 100% 661 543.0KB/s 00:00
[root@k8s-master1 ~]# ssh k8s-node2 mkdir -p /etc/kubernetes/ssl
[root@k8s-master1 ~]# scp kubelet-bootstrap.kubeconfig kubelet.json k8s-node2:/etc/kubernetes/
kubelet-bootstrap.kubeconfig 100% 2102 1.6MB/s 00:00
kubelet.json 100% 802 758.7KB/s 00:00
[root@k8s-master1 ~]# scp ca.pem k8s-node2:/etc/kubernetes/ssl/
ca.pem 100% 1310 1.4MB/s 00:00
[root@k8s-master1 ~]# scp kubelet.service k8s-node2:/usr/lib/systemd/system/
kubelet.service 100% 661 669.1KB/s 00:00
[root@k8s-master1 ~]#
kubelete.json中的address改为各个节点的ip地址 ，需要修改一下
启动kubelet
[root@k8s-master1 ~]# ssh k8s-node1 mkdir -p mkdir /var/lib/kubelet /var/log/kubernetes
[root@k8s-master1 ~]# ssh k8s-node2 mkdir -p mkdir /var/lib/kubelet /var/log/kubernetes
[root@k8s-master1 ~]# ssh k8s-node1 systemctl daemon-reload
[root@k8s-master1 ~]# ssh k8s-node2 systemctl daemon-reload
[root@k8s-master1 ~]# ssh k8s-node1 systemctl enable kubelet
Created symlink /etc/systemd/system/multi-user.target.wants/kubelet.service → /usr/lib/systemd/system/kubelet.service.
[root@k8s-master1 ~]# ssh k8s-node2 systemctl enable kubelet
Created symlink /etc/systemd/system/multi-user.target.wants/kubelet.service → /usr/lib/systemd/system/kubelet.service.
[root@k8s-master1 ~]# ssh k8s-node1 systemctl start kubelet
[root@k8s-master1 ~]# ssh k8s-node2 systemctl start kubelet
[root@k8s-master1 ~]# ssh k8s-node1 systemctl status kubelet
● kubelet.service - Kubernetes Kubelet
Loaded: loaded (/usr/lib/systemd/system/kubelet.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-02-21 17:49:20 CST; 26s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 19745 (kubelet)
Tasks: 9 (limit: 23502)
Memory: 18.5M
CGroup: /system.slice/kubelet.service
└─19745 /usr/local/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig --cert-dir=/etc/kubernetes/ssl --kubeconfig=/etc/kubernetes/kubelet.kubeconfig --config=/etc/kubernetes/kubelet.json --network-plugin=cni --pod-infra-container-image=kubernetes/pause --alsologtostderr=true --logtostderr=false --log-dir=/var/log/kubernetes --v=2
如果pause镜像下载不下来可以手动下载
docker pull kubernetes/pause
批准CSR 请求
node节点启动后会向主节点发送csr请求
批准前的状态时Pending
批准之后的状态是Approved,Issued
[root@k8s-master1 ~]# kubectl get csr
NAME AGE SIGNERNAME REQUESTOR REQUESTEDDURATION CONDITION
node-csr-4fb--zcCoK1VH6pv0VAGTAcLem23M2aVmNhIcnNOiA4 3m8s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap <none> Pending
node-csr-u2keQxwL2xiDPiynMhH8LXidjWJzqapQ1c1Lbk1qwM0 4m14s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap <none> Pending
[root@k8s-master1 ~]# kubectl certificate approve node-csr-4fb--zcCoK1VH6pv0VAGTAcLem23M2aVmNhIcnNOiA4
certificatesigningrequest.certificates.k8s.io/node-csr-4fb--zcCoK1VH6pv0VAGTAcLem23M2aVmNhIcnNOiA4 approved
[root@k8s-master1 ~]# kubectl get csr
NAME AGE SIGNERNAME REQUESTOR REQUESTEDDURATION CONDITION
node-csr-4fb--zcCoK1VH6pv0VAGTAcLem23M2aVmNhIcnNOiA4 3m58s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap <none> Approved,Issued
node-csr-u2keQxwL2xiDPiynMhH8LXidjWJzqapQ1c1Lbk1qwM0 5m4s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap <none> Pending
[root@k8s-master1 ~]# kubectl certificate approve node-csr-u2keQxwL2xiDPiynMhH8LXidjWJzqapQ1c1Lbk1qwM0
certificatesigningrequest.certificates.k8s.io/node-csr-u2keQxwL2xiDPiynMhH8LXidjWJzqapQ1c1Lbk1qwM0 approved
[root@k8s-master1 ~]# kubectl get csr
NAME AGE SIGNERNAME REQUESTOR REQUESTEDDURATION CONDITION
node-csr-4fb--zcCoK1VH6pv0VAGTAcLem23M2aVmNhIcnNOiA4 4m15s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap <none> Approved,Issued
node-csr-u2keQxwL2xiDPiynMhH8LXidjWJzqapQ1c1Lbk1qwM0 5m21s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap <none> Approved,Issued
[root@k8s-master1 ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-node1 NotReady <none> 26s v1.23.4
k8s-node2 NotReady <none> 7s v1.23.4
[root@k8s-master1 ~]#
3.3.7 部署kube-proxy
创建csr
[root@k8s-master1 ~]# vim kube-proxy-csr.json
[root@k8s-master1 ~]# cat kube-proxy-csr.json
{
"CN": "system:kube-proxy",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "k8s",
"OU": "system"
}
]
}
生成证书
[root@k8s-master1 ~]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
2022/02/21 18:07:42 [INFO] generate received request
2022/02/21 18:07:42 [INFO] received CSR
2022/02/21 18:07:42 [INFO] generating key: rsa-2048
2022/02/21 18:07:42 [INFO] encoded CSR
2022/02/21 18:07:42 [INFO] signed certificate with serial number 298500625905303109270540321044842803643449440335
2022/02/21 18:07:42 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").
创建kubeconfig文件
[root@k8s-master1 ~]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.3.61:6443 --kubeconfig=kube-proxy.kubeconfig
Cluster "kubernetes" set.
[root@k8s-master1 ~]# kubectl config set-credentials kube-proxy --client-certificate=kube-proxy.pem --client-key=kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig
User "kube-proxy" set.
[root@k8s-master1 ~]# kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig
Context "default" created.
[root@k8s-master1 ~]# kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
Switched to context "default".
[root@k8s-master1 ~]#
创建kube-proxy配置文件
[root@k8s-master1 ~]# vim kube-proxy.yaml
[root@k8s-master1 ~]# cat kube-proxy.yaml
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 192.168.3.64
clientConnection:
kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
clusterCIDR: 192.168.3.0/24
healthzBindAddress: 192.168.3.64:10256
kind: KubeProxyConfiguration
metricsBindAddress: 192.168.3.64:10249
mode: "ipvs"
每个节点的IP都需要修改 bindAddress healthzBindAddress metricsBindAddress
创建systemd unit服务启动文件
[root@k8s-master1 ~]# vim kube-proxy.service
[root@k8s-master1 ~]# cat kube-proxy.service
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
WorkingDirectory=/var/lib/kube-proxy
ExecStart=/usr/local/bin/kube-proxy \
--config=/etc/kubernetes/kube-proxy.yaml \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
分发配置
[root@k8s-master1 ~]# scp kube-proxy.kubeconfig kube-proxy.yaml k8s-node1:/etc/kubernetes/
kube-proxy.kubeconfig 100% 6206 5.6MB/s 00:00
kube-proxy.yaml 100% 290 490.2KB/s 00:00
[root@k8s-master1 ~]# scp kube-proxy.kubeconfig kube-proxy.yaml k8s-node2:/etc/kubernetes/
kube-proxy.kubeconfig 100% 6206 4.7MB/s 00:00
kube-proxy.yaml 100% 290 390.5KB/s 00:00
[root@k8s-master1 ~]# scp kube-proxy.service k8s-node1:/usr/lib/systemd/system/
kube-proxy.service 100% 440 373.8KB/s 00:00
[root@k8s-master1 ~]# scp kube-proxy.service k8s-node2:/usr/lib/systemd/system/
kube-proxy.service 100% 440 376.3KB/s 00:00
[root@k8s-master1 ~]#
切记修改kube-proxy.yaml中的IP
启动kube-proxy
[root@k8s-master1 ~]# ssh k8s-node1 mkdir -p /var/lib/kube-proxy
[root@k8s-master1 ~]# ssh k8s-node2 mkdir -p /var/lib/kube-proxy
[root@k8s-master1 ~]# ssh k8s-node1 systemctl daemon-reload
[root@k8s-master1 ~]# ssh k8s-node2 systemctl daemon-reload
[root@k8s-master1 ~]# ssh k8s-node1 systemctl enable kube-proxy
Created symlink /etc/systemd/system/multi-user.target.wants/kube-proxy.service → /usr/lib/systemd/system/kube-proxy.service.
[root@k8s-master1 ~]# ssh k8s-node2 systemctl enable kube-proxy
Created symlink /etc/systemd/system/multi-user.target.wants/kube-proxy.service → /usr/lib/systemd/system/kube-proxy.service.
[root@k8s-master1 ~]# ssh k8s-node1 systemctl start kube-proxy
[root@k8s-master1 ~]# ssh k8s-node2 systemctl start kube-proxy
[root@k8s-master1 ~]# ssh k8s-node1 systemctl status kube-proxy
● kube-proxy.service - Kubernetes Kube-Proxy Server
Loaded: loaded (/usr/lib/systemd/system/kube-proxy.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-02-21 18:19:22 CST; 10s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 24165 (kube-proxy)
Tasks: 7 (limit: 23502)
Memory: 12.8M
CGroup: /system.slice/kube-proxy.service
└─24165 /usr/local/bin/kube-proxy --config=/etc/kubernetes/kube-proxy.yaml --alsologtostderr=true --logtostderr=false --log-dir=/var/log/kubernetes --v=2
2月 21 18:19:22 k8s-node1 kube-proxy[24165]: I0221 18:19:22.712726 24165 server.go:656] "Version info" version="v1.23.4"
2月 21 18:19:22 k8s-node1 kube-proxy[24165]: I0221 18:19:22.715301 24165 conntrack.go:100] "Set sysctl" entry="net/netfilter/nf_conntrack_max" value=131072
3.3.8 安装calico网络插件
下载calico.yaml并修改内容，如下图红框内容，否则启动会报错
[root@k8s-master1 ~]# wget https://docs.projectcalico.org/manifests/calico.yaml
--2022-02-21 18:46:03-- https://docs.projectcalico.org/manifests/calico.yaml
正在解析主机 docs.projectcalico.org (docs.projectcalico.org)... 54.255.56.197, 52.220.244.242, 2406:da18:880:3802:371c:4bf1:923b:fc30, ...
正在连接 docs.projectcalico.org (docs.projectcalico.org)|54.255.56.197|:443... 已连接。
GnuTLS: 资源临时不可用，请重试。
GnuTLS: 资源临时不可用，请重试。
GnuTLS: 资源临时不可用，请重试。
已发出 HTTP 请求，正在等待回应... 200 OK
长度：217523 (212K) [text/yaml]
正在保存至: “calico.yaml”
calico.yaml 100%[======================================================>] 212.42K 691KB/s 用时 0.3s
2022-02-21 18:46:04 (691 KB/s) - 已保存 “calico.yaml” [217523/217523])
由于calico自身网络发现机制有问题，因为需要修改 calico使用的物理网卡，ens160为自己机器的网卡，支持正则，还有修改后面CALICO_IPV4POOL_CIDR,不能与初始值“192.168.0.0/16”相同。需要可kube-controller-manager中 --cluster-cidr=10.0.0.0/16相同
name: IP_AUTODETECTION_METHOD
value: "interface=ens33
否则会报错：
calico/node is not ready: BIRD is not ready: Failed to stat() nodename file: stat /var/lib/calico/nodename: no such file or directory
验证calico插件
[root@k8s-master1 ~]# kubectl apply -f calico.yaml
configmap/calico-config created
customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/caliconodestatuses.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/ipreservations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/kubecontrollersconfigurations.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created
customresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org created
clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
clusterrole.rbac.authorization.k8s.io/calico-node created
clusterrolebinding.rbac.authorization.k8s.io/calico-node created
daemonset.apps/calico-node created
serviceaccount/calico-node created
deployment.apps/calico-kube-controllers created
serviceaccount/calico-kube-controllers created
Warning: policy/v1beta1 PodDisruptionBudget is deprecated in v1.21+, unavailable in v1.25+; use policy/v1 PodDisruptionBudget
poddisruptionbudget.policy/calico-kube-controllers created
[root@k8s-master1 ~]#
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# kubectl get pod -A
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system calico-kube-controllers-566dc76669-jclvt 0/1 ContainerCreating 0 4s
kube-system calico-node-m4d2j 0/1 PodInitializing 0 5s
kube-system calico-node-qxrm9 0/1 Running 0 5s
[root@k8s-master1 ~]# kubectl get pod -A
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system calico-kube-controllers-566dc76669-jclvt 1/1 Running 0 11s
kube-system calico-node-m4d2j 1/1 Running 0 12s
kube-system calico-node-qxrm9 1/1 Running 0 12s
[root@k8s-master1 ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-node1 Ready <none> 148m v1.23.4
k8s-node2 Ready <none> 147m v1.23.4
3.3.9 安装dns
复制yaml内容
kubernetes/coredns.yaml.sed at master · kubernetes/kubernetes · GitHub
从上面网址中复制内容到yaml文件，修改其中一下几个位置
- clusterIP: $DNS_SERVER_IP的IP，这个IP和kubelet.json中的"clusterDNS": ["10.255.0.2"]对应
- $DNS_DOMAIN 和apiserver里的host中的域名对应 cluster.local
- memory: $DNS_MEMORY_LIMIT 随便写一个大于下面的70Mi就行，这里我加了100写的170Mi
- image:k8s.gcr.io/coredns/coredns:v1.8.6 改成 image: coredns/coredns:1.8.6 源地址访问不到需要用镜像加速，之前安装docker的时候已经配置过了
[root@k8s-master1 addons]# vim coredns.yaml
... ...
Corefile: |
.:53 {
errors
health {
lameduck 5s
}
ready
#kubernetes $DNS_DOMAIN in-addr.arpa ip6.arpa {
kubernetes cluster.local in-addr.arpa ip6.arpa {
pods insecure
fallthrough in-addr.arpa ip6.arpa
ttl 30
}
... ...
- name: coredns
image: coredns/coredns:1.8.6
imagePullPolicy: IfNotPresent
resources:
limits:
#memory: $DNS_MEMORY_LIMIT
memory: 170Mi
requests:
cpu: 100m
memory: 70Mi
args: [ "-conf", "/etc/coredns/Corefile" ]
... ...
spec:
selector:
k8s-app: kube-dns
#clusterIP: $DNS_SERVER_IP
clusterIP: 10.255.0.2
ports:
- name: dns
[root@k8s-master1 addons]# kubectl apply -f coredns.yaml
serviceaccount/coredns created
clusterrole.rbac.authorization.k8s.io/system:coredns created
clusterrolebinding.rbac.authorization.k8s.io/system:coredns created
configmap/coredns created
deployment.apps/coredns created
service/kube-dns created
验证coredns
[root@k8s-master1 addons]# kubectl get pod -n kube-system
NAME READY STATUS RESTARTS AGE
calico-kube-controllers-566dc76669-jclvt 1/1 Running 0 50m
calico-node-m4d2j 1/1 Running 0 50m
calico-node-qxrm9 1/1 Running 0 50m
coredns-648769df8c-jzpj9 1/1 Running 0 4s
[root@k8s-master1 addons]# kubectl get svc -n kube-system
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kube-dns ClusterIP 10.255.0.2 <none> 53/UDP,53/TCP,9153/TCP 14s
[root@k8s-master1 addons]# kubectl run busybox --image busybox --restart=Never --rm -it busybox -- sh
If you don't see a command prompt, try pressing enter.
/ # ping www.baidu.com
PING www.baidu.com (39.156.66.14): 56 data bytes
64 bytes from 39.156.66.14: seq=0 ttl=52 time=10.728 ms
64 bytes from 39.156.66.14: seq=1 ttl=52 time=11.678 ms
64 bytes from 39.156.66.14: seq=2 ttl=52 time=11.675 ms
^C
--- www.baidu.com ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 10.728/11.360/11.678 ms
/ # exit
pod "busybox" deleted
[root@k8s-master1 addons]#
四、安装dashboard
4.1 下载yaml文件
官网地址
kubernetes/cluster/addons/dashboard at release-1.23 · kubernetes/kubernetes · GitHub
下载dashboard.yaml，新增type: NodePort 默认为clusterIP 没法外部访问
4.2 部署dashboard
[root@k8s-master1 ~]# kubectl apply -f dashboard.yaml
namespace/kubernetes-dashboard created
serviceaccount/kubernetes-dashboard created
service/kubernetes-dashboard created
secret/kubernetes-dashboard-certs created
secret/kubernetes-dashboard-csrf created
secret/kubernetes-dashboard-key-holder created
configmap/kubernetes-dashboard-settings created
role.rbac.authorization.k8s.io/kubernetes-dashboard created
clusterrole.rbac.authorization.k8s.io/kubernetes-dashboard created
rolebinding.rbac.authorization.k8s.io/kubernetes-dashboard created
clusterrolebinding.rbac.authorization.k8s.io/kubernetes-dashboard created
deployment.apps/kubernetes-dashboard created
service/dashboard-metrics-scraper created
deployment.apps/dashboard-metrics-scraper created
[root@k8s-master1 ~]# kubectl get pod,svc -n kubernetes-dashboard
NAME READY STATUS RESTARTS AGE
pod/dashboard-metrics-scraper-546d6779cb-bzmt5 1/1 Running 0 2m47s
pod/kubernetes-dashboard-6fdf56b6fd-flb8p 1/1 Running 0 2m47s
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/dashboard-metrics-scraper ClusterIP 10.255.235.211 <none> 8000/TCP 2m47s
service/kubernetes-dashboard NodePort 10.255.41.10 <none> 443:36261/TCP 2m47s
4.3 访问
通过访问node节点地址加上映射的端口访问，我们可以看到，映射的端口为36261，所以访问地址可以使用https://192.168.3.64:36261
进入登录界面，有两种登录模式
这个token可以通过kubectl命令获取到，获取命令如下
[root@k8s-master1 ~]# kubectl get secrets -n kubernetes-dashboard
NAME TYPE DATA AGE
default-token-sw2mp kubernetes.io/service-account-token 3 11m
kubernetes-dashboard-certs Opaque 0 11m
kubernetes-dashboard-csrf Opaque 1 11m
kubernetes-dashboard-key-holder Opaque 2 11m
kubernetes-dashboard-token-79f29 kubernetes.io/service-account-token 3 11m
[root@k8s-master1 ~]# kubectl describe secrets kubernetes-dashboard-token-79f29 -n kubernetes-dashboard
Name: kubernetes-dashboard-token-79f29
Namespace: kubernetes-dashboard
Labels: <none>
Annotations: kubernetes.io/service-account.name: kubernetes-dashboard
kubernetes.io/service-account.uid: 57d21ea0-1328-495a-8f8c-35aa62576d2f
Type: kubernetes.io/service-account-token
Data
====
ca.crt: 1310 bytes
namespace: 20 bytes
token: eyJhbGciOiJSUzI1NiIsImtpZCI6IjFPZkR5UU5GbTZ4dHhzZlFScFJ4OFJsanQxQnowUjR2OVphd01ORUM1VE0ifQ.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.DR98MAAaMSJ1ZeLHFoaDowSukn5UNEGBPrCU1ojpdtqQwqGkx4bFh4bVPdvFguLOZBcExd0RetxE8YtBV2YYBYhRy-6wmXrfNal6kb3ZUS_skjbVFV87XIxO7qdXLjDRWxjjIMIf9K75QDXg0y5-BUGb1_rwPPC9C4dGCGy-CZ1S7SSXASU77Jh4Be0FL9ncH0p5mvij-48A9Nmw5na6Iz12v1SasfwmE_Qd_DqqUv4q0kijB6sqkgN__vsSwKtTkcCtjxgcZjLrtwCIwTpTWCaQPTbnoF-a7jgxpHtNDHYN-Xs33iiBrN-h4uw-9LPTzYBjhZTkuioCRnsFdIsB6g
最后一行token值就是登录所需token，登录上来会发现什么都看不了，右上角还提示信息
namespaces is forbidden: User "system:serviceaccount:kubernetes-dashboard:kubernetes-dashboard" cann
原因是因为dashboard.yaml中自带的用户权限分配比较小，为了方便学习，我们直接创建个管理员权限用户
[root@k8s-master1 ~]# cat dashboard-rbac.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
name: dashboard-admin
namespace: kube-system
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: dashboard-admin
subjects:
- kind: ServiceAccount
name: dashboard-admin
namespace: kube-system
roleRef:
kind: ClusterRole
name: cluster-admin
apiGroup: rbac.authorization.k8s.io
[root@k8s-master1 ~]#
[root@k8s-master1 ~]# kubectl apply -f dashboard-rbac.yaml
serviceaccount/dashboard-admin unchanged
clusterrolebinding.rbac.authorization.k8s.io/dashboard-admin created
[root@k8s-master1 ~]# kubectl -n kube-system describe secrets dashboard-admin-token-bfvth
Name: dashboard-admin-token-bfvth
Namespace: kube-system
Labels: <none>
Annotations: kubernetes.io/service-account.name: dashboard-admin
kubernetes.io/service-account.uid: ddf016a0-65e5-43ba-ace8-d76c4de9dbe1
Type: kubernetes.io/service-account-token
Data
====
ca.crt: 1310 bytes
namespace: 11 bytes
token: eyJhbGciOiJSUzI1NiIsImtpZCI6IjFPZkR5UU5GbTZ4dHhzZlFScFJ4OFJsanQxQnowUjR2OVphd01ORUM1VE0ifQ.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.xUSvtoDiEl3sFJPNQlMTcLHdt8yBwyzQY1SrN52t36b_cRQNyHQdTj0cex9HCWDRPuYAjVtk9nTDRnzbe6swhfjwuwDU4Dx79CwP_rOOgN8dxAXIpU-5Q3wCMNsteSic9bGOlzI8BrXXMUzXmnhqIvbjIx9hxI1o_jencr-2Zq3AjRZfNnFqBtkGWqToB0sBRgRfpzNpaaittxbFzaZQELro8jcvmpExmEXUtBtN186ojGljKsa0lJQGh8ToKBvd9ib9ee_nQ3F2p8Hv8mMpR8910jhAr8egaPgbGr637T90oI4qzq3JYFgSDB4sOSU-JLVGE2El3vWIawYAuo3Efw
使用如上token，在重新登录一下，已经可以看到内容，关于rbac细致的权限控制这里先不赘述
五、配置高可用
关于高可用其实有很多种方案，比如：
- 云厂商的负载均衡：如阿里云SLB
- 硬件负载均衡器：如F5设备
- haproxy 等
本次使用nginx+keepalived的方式实现apiserver接口的高可用，我们选用master1和master2两个节点来作为对外负载
5.1 安装nginx和keepalived
master1和master2两台机器上均需要安装
[root@k8s-master1 ~]# yum install nginx keepalived
上次元数据过期检查：1:38:26 前，执行于 2022年02月22日 星期二 08时18分41秒。
依赖关系解决。
===============================================================================================================================
软件包 架构 版本 仓库 大小
===============================================================================================================================
安装:
keepalived x86_64 2.1.5-6.el8 AppStream 537 k
nginx x86_64 1:1.14.1-9.module_el8.0.0+184+e34fea82 AppStream 570 k
安装依赖关系:
。。。 。。。
完毕！
[root@k8s-master1 ~]#
修改nginx配置文件，新增框中内容，两个都需要修改
修改完之后执行一下检查命令
[root@k8s-master2 keepalived]# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
修改keepalived配置和nginx检查脚本
[root@k8s-master2 keepalived]# cat keepalived.conf
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id NGINX_MASTER
}
vrrp_script check_nginx {
script "/etc/keepalived/check_nginx.sh"
}
vrrp_instance VI_1 {
state MASTER # 主
interface ens160 # 修改为实际网卡名
virtual_router_id 20 # VRRP 路由 ID实例，每个实例是唯一的
priority 100 # 优先级，备服务器设置 90
advert_int 1 # 指定VRRP 心跳包通告间隔时间，默认1秒
authentication {
auth_type PASS
auth_pass 1111
}
# 虚拟IP
virtual_ipaddress {
192.168.3.60/24
}
track_script {
check_nginx
}
}
[root@k8s-master2 keepalived]# cat check_nginx.sh
#!/bin/bash
count=$(ps -ef |grep nginx | grep sbin | egrep -cv "grep|$$")
if [ "$count" -eq 0 ];then
systemctl stop keepalived
fi
[root@k8s-master2 keepalived]#
5.2 启动并验证
两台均需启动
[root@k8s-master2 keepalived]# chmod +x /etc/keepalived/check_nginx.sh
[root@k8s-master2 keepalived]# yum install nginx-mod-stream
上次元数据过期检查：3:07:42 前，执行于 2022年02月22日 星期二 07时09分15秒。
软件包 nginx-mod-stream-1:1.14.1-9.module_el8.0.0+184+e34fea82.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕！
[root@k8s-master2 keepalived]# systemctl daemon-reload
[root@k8s-master2 keepalived]# systemctl start nginx
[root@k8s-master2 keepalived]# systemctl start keepalived
[root@k8s-master2 keepalived]# systemctl enable nginx keepalived
Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /usr/lib/systemd/system/nginx.service.
Created symlink /etc/systemd/system/multi-user.target.wants/keepalived.service → /usr/lib/systemd/system/keepalived.service.
查看vip绑定信息，已经绑定到主节点上
[root@k8s-master2 keepalived]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:32:f6:ad brd ff:ff:ff:ff:ff:ff
inet 192.168.3.62/24 brd 192.168.3.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.3.60/24 scope global secondary ens160
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe32:f6ad/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:b1:a7:77:5e brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
测试停止主节点nginx，vip已经不再此节点了
[root@k8s-master2 keepalived]# systemctl stop nginx
[root@k8s-master2 keepalived]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:32:f6:ad brd ff:ff:ff:ff:ff:ff
inet 192.168.3.62/24 brd 192.168.3.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe32:f6ad/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:b1:a7:77:5e brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
[root@k8s-master2 keepalived]#
另外一个节点查看ip，已经过来了
[root@k8s-master1 keepalived]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:70:3e:4f brd ff:ff:ff:ff:ff:ff
inet 192.168.3.61/24 brd 192.168.3.255 scope global noprefixroute ens160
valid_lft forever preferred_lft forever
inet 192.168.3.60/24 scope global secondary ens160
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe70:3e4f/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:97:be:37:5b brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
[root@k8s-master1 keepalived]#
5.3 修改所有k8s指向apiserver的地址到vip
目前所有的Node组件连接都还是k8s-master1，如果不改为连接VIP走负载均衡器，那么Master还是单点故障，所以需要把原来192.168.3.61修改为192.168.3.60（VIP）。
在所有Worker Node执行：
[root@k8s-node1 ~]# sed -i 's#192.168.3.61:6443#192.168.3.60:16443#' /etc/kubernetes/kubelet-bootstrap.kubeconfig
[root@k8s-node1 ~]# sed -i 's#192.168.3.61:6443#192.168.3.60:16443#' /etc/kubernetes/kubelet.json
[root@k8s-node1 ~]# sed -i 's#192.168.3.61:6443#192.168.3.60:16443#' /etc/kubernetes/kubelet.kubeconfig
[root@k8s-node1 ~]# sed -i 's#192.168.3.61:6443#192.168.3.60:16443#' /etc/kubernetes/kube-proxy.yaml
[root@k8s-node1 ~]# sed -i 's#192.168.3.61:6443#192.168.3.60:16443#' /etc/kubernetes/kube-proxy.kubeconfig
[root@k8s-node1 ~]# systemctl restart kubelet kube-proxy
[root@k8s-node1 ~]#
至此 大功告成 欢迎留言 欢迎指导
685
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
