一、使用VLANIF实现不同网段的连通
LSW2:
vlan batch 6 7 8 100
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 100
interface GigabitEthernet0/0/2
port link-type access
port default vlan 6
interface GigabitEthernet0/0/3
port link-type access
port default vlan 7
interface GigabitEthernet0/0/4
port link-type access
port default vlan 8
interface GigabitEthernet0/0/5
port link-type trunk
port trunk allow-pass vlan 100
interface Vlanif6
ip address 192.168.6.254 255.255.255.0
interface Vlanif7
ip address 192.168.7.254 255.255.255.0
interface Vlanif8
ip address 192.168.8.254 255.255.255.0
interface Vlanif100
ip address 192.168.254.2 255.255.255.0
注:LSW1、LSW3类似LSW2。
二、静态路由配置
LSW2:
ip route-static 192.168.3.0 255.255.255.0 192.168.254.1
ip route-static 192.168.3.0 255.255.255.0 192.168.254.3 preference 100
ip route-static 192.168.4.0 255.255.255.0 192.168.254.1
ip route-static 192.168.4.0 255.255.255.0 192.168.254.3 preference 100
ip route-static 192.168.5.0 255.255.255.0 192.168.254.1
ip route-static 192.168.5.0 255.255.255.0 192.168.254.3 preference 100
ip route-static 192.168.9.0 255.255.255.0 192.168.254.1 preference 100
ip route-static 192.168.9.0 255.255.255.0 192.168.254.3
ip route-static 192.168.10.0 255.255.255.0 192.168.254.1 preference 100
ip route-static 192.168.10.0 255.255.255.0 192.168.254.3
ip route-static 192.168.11.0 255.255.255.0 192.168.254.1 preference 100
ip route-static 192.168.11.0 255.255.255.0 192.168.254.3
注:LSW1、LSW3类似LSW2。
三、RSTP的配置
LSW2:
stp mode rstp
注:LSW1、LSW3类似LSW2。
小结:配好就都可以连通啦~