思科模拟器 OSPF 协议实训

OSPF  协议实训

实训目的：全网配通

实训拓扑：

R1   fa 0/0   192.168.11.1

R2   fa0/0    192.168.11.2

     Fa0/1   192.168.12.1

R3   fa0/0     192.168.12.2

     Fa0/1      192.168.13.1

R4   fa0/0      192.168.13.2

（均选取2811型号路由器）

实训步骤：

R1

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no

ress RETURN to get started!

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#hostname ri

ri(config)#int fa 0/0

ri(config-if)#ip add 192.168.11.1 255.255.255.0

ri(config-if)#no shutdown

ri(config-if)#exit

ri(config)#router ospf 20                              ospf协议启用

ri(config-router)#network 192.168.11.0 0.0.0.255 area 0        发布网段

ri(config-router)#exit

ri(config)#exit

ri#

%SYS-5-CONFIG_I: Configured from console by console

ri#show ip route

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

R2

--- System Configuration Dialog ---

Would