IPV6实验

题目：
操作：

配置IPV4：
配置公网：
[r2]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add 23.1.1.1 24
[r2]ip route-static 0.0.0.0 0 23.1.1.2

[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add 23.1.1.2 24
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add 34.1.1.1 24
[r3-GigabitEthernet0/0/1]int loopback 0
[r3-LoopBack0]ip add 3.3.3.3 24

[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip add 34.1.1.2 24
[r4]ip route-static 0.0.0.0 0 34.1.1.1
配置私网：

[r1]int loopback 0
[r1-LoopBack0]ip add 192.168.1.1 25
[r1-LoopBack0]int lo 1
[r1-LoopBack1]ip add 192.168.1.129 25
[r1-LoopBack1]int g0/0/1
[r1-GigabitEthernet0/0/1]ip add 192.168.0.1 30
[r1]ip route-static 0.0.0.0 0 192.168.0.2

[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip add 192.168.0.2 30
[r2-GigabitEthernet0/0/0]int lo 0
[r2-LoopBack0]ip add 192.168.2.1 24

[r2]ip route-static 192.168.1.0 24 192.168.0.1
[r2]acl 2000
[r2-acl-basic-2000]rule permit source 192.168.0.0 0.0.255.255
[r2-acl-basic-2000]int g0/0/1
[r2-GigabitEthernet0/0/1]nat outbound 2000

启动IPV6和ripng：
[r1]ipv6
[r1]int lo 0
[r1-LoopBack0]ipv6 enable
[r1-LoopBack0]ipv6 address 2002:1701:0101:0000:0000::1/65
[r1-LoopBack0]int lo 1
[r1-LoopBack1]ipv6 enable
[r1-LoopBack