【无标题】STM32L1 RTC配置

#include “RTC.h”

/RTC配置函数/
void rtc_config(uint32_t wkuptime)
{
RTC_InitTypeDef RTC_InitStructure;
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
/允许访问BKP区域/
PWR_RTCAccessCmd(ENABLE);
/* 使能外部低速晶振 32.768k /
RCC_LSEConfig(RCC_LSE_ON);
/ 等待外部低速晶振就绪 /
while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
{
}
/ 选择RTC外部时钟为低速晶振32.768K /
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
/ 使能RTC时钟 /
RCC_RTCCLKCmd(ENABLE);
/ 等待RTC寄存器同步 /
RTC_WaitForSynchro();
/ Calendar Configuration /
RTC_InitStructure.RTC_AsynchPrediv = 0x7F;
RTC_InitStructure.RTC_SynchPrediv = 0xFF; / (32768/(127+1))/(255+1)/
RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;//24小时制
/ 检查RTC初始化 */
RTC_Init(&RTC_InitStructure);
RCC_ClearFlag();
RTC_WaitForSynchro();
/中断配置/
RTC_NVIC_Config();
//先关闭TRC中断使能
RTC_WakeUpCmd(DISABLE);
//为唤醒功能选择RTC配置好的时钟源
RTC_WakeUpClockConfig(RTC_WakeUpClock_CK_SPRE_16bits);
//设置WAKE UP自动重装载寄存器
RTC_SetWakeUpCounter(wkuptime);//(32768hz/128)-1 = 255 1S
//清除RTC唤醒中断标志
RTC_ClearFlag(RTC_FLAG_WUTF);
//使能RTC唤醒中断
RTC_ITConfig(RTC_IT_WUT, ENABLE);
//使能唤醒功能
RTC_WakeUpCmd(ENABLE);

}

/RTC初始化函数/
void rtc_Init(void)
{
/在启动时检查备份寄存器BKP_DR0，如果内容不是0x32F2,
则需重新配置时间并给寄存器BKP_DR0写入0x32F2，寄存器BKP_DR0只有掉电复位才会重置
按复位按钮程序复位不会重置，重置值为0x00000000/
if( RTC_ReadBackupRegister(RTC_BKP_DR0) != 0x32F2)
{
rtc_config(60*2);//定时两分钟唤醒,要改变唤醒时间程序下载好后要断电重启，唤醒时间才能配置进去
RTC_TimeRegulate();
RTC_WriteBackupRegister(RTC_BKP_DR0,0x32F2);
}
RCC_ClearFlag();
RTC_WaitForSynchro();
}

/RTC中断函数，暂时没用到/
void RTC_NVIC_Config(void)
{
static NVIC_InitTypeDef NVIC_InitStructure;
static EXTI_InitTypeDef EXTI_InitStructure;

  /* 配置外部中断控制线20，实现RTC唤醒 */
	EXTI_ClearITPendingBit(EXTI_Line20);
	EXTI_InitStructure.EXTI_Line = EXTI_Line20;
	EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
	EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
	EXTI_InitStructure.EXTI_LineCmd = ENABLE;
	EXTI_Init(&EXTI_InitStructure);

	/*使能 RTC 中断 */
	//	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
	NVIC_InitStructure.NVIC_IRQChannel = RTC_WKUP_IRQn;
	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
	NVIC_Init(&NVIC_InitStructure);

}

/设置日期与时间的函数/
void RTC_TimeRegulate(void)
{
RTC_TimeTypeDef RTC_TimeStruct;
RTC_DateTypeDef RTC_DateStruct;
RTC_TimeStruct.RTC_Hours = 17;
RTC_TimeStruct.RTC_Minutes = 39;
RTC_TimeStruct.RTC_Seconds = 00;
RTC_TimeStruct.RTC_H12 = RTC_H12_AM;
RTC_SetTime(RTC_Format_BIN,&RTC_TimeStruct);
RTC_DateStruct.RTC_Year = 22;
RTC_DateStruct.RTC_Date = 02;
RTC_DateStruct.RTC_Month = 03;
RTC_DateStruct.RTC_WeekDay = 3;
RTC_SetDate(RTC_Format_BIN,&RTC_DateStruct);
}

/时间日期显示函数/
void display_time(void)
{
RTC_DateTypeDef date;
RTC_TimeTypeDef time;
RTC_GetTime(RTC_Format_BCD, &time);//以十进制的格式显示打印时间
RTC_GetDate(RTC_Format_BCD, &date); //以十进制的格式显示日期
printf(“20%02x-%x-%x %02x:%02x:%02x\n”, date.RTC_Year, date.RTC_Month, date.RTC_Date, time.RTC_Hours, time.RTC_Minutes, time.RTC_Seconds);
}

在这里插入代码片