综合实验-BGP（ospf+rip+bgp基本配置）

实验要求

1、所有路由器都开启BGP协议，R1、R2、R5为IBGP ?AS 100，R3和R2为EBGP，R3属于AS 200
2、R1、R2、R5配置ospf协议，属于area 0
3、R5有两个业务网段：202.0.0.1/24和202.0.1.1/24
4、R3可以访问R5业务网段

[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 15.0.0.2 30	
[R5]int LoopBack 0
[R5-LoopBack0]ip add 5.5.5.5 32
[R5]int LoopBack 1
[R5-LoopBack1]ip add 202.0.0.1 24
[R5-LoopBack1]int LoopBack 2
[R5-LoopBack2]ip add 202.0.1.1 24
[R5]ospf 1
[R5-ospf-1]area 0	
[R5-ospf-1-area-0.0.0.0]network 15.0.0.0 0.0.0.255	
[R5-ospf-1-area-0.0.0.0]network 5.5.5.5 0.0.0.255
[R5-ospf-1]bgp 100
[R5-bgp]router-id 5.5.5.5
[R5-bgp]peer 1.1.1.1 as-number 100
[R5-bgp]peer 1.1.1.1 connect-interface LoopBack 0
[R5-bgp]peer 2.2.2.2 as-number 100
[R5-bgp]peer 2.2.2.2 connect-interface LoopBack 0
[R5-bgp]network 202.0.0.1 24  网段引入BGP
[R5-bgp]network 202.0.1.1 24  网段引入BGP

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 15.0.0.1 30
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 12.0.0.1 30
[R1]int LoopBack 0
[R1-LoopBack0]ip add 1.1.1.1 32
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 15.0.0.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 12.0.0.0 0.0.0.255	
[R1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.255
[R1]bgp 100
[R1-bgp]router-id 1.1.1.1	
[R1-bgp]peer 2.2.2.2 as-number 100
[R1-bgp]peer 2.2.2.2 connect-interface LoopBack 0	
[R1-bgp]peer 5.5.5.5 as-number 100
[R1-bgp]peer 5.5.5.5 connect-interface LoopBack 0

[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.0.0.2 24
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 23.0.0.1 24
[R2]int LoopBack 0
[R2-LoopBack0]ip add 2.2.2.2 32
[R2]ospf 1
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 12.0.0.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.255
[R2-ospf-1-area-0.0.0.0]rip 1
[R2-rip-1]version 2	
[R2-rip-1]network 23.0.0.0
[R2]bgp 100
[R2-bgp]router-id 2.2.2.2	
[R2-bgp]peer 5.5.5.5 as-number 100	
[R2-bgp]peer 5.5.5.5 connect-interface LoopBack 0	
[R2-bgp]peer 1.1.1.1 as-number 100
[R2-bgp]peer 1.1.1.1 connect-interface LoopBack 0
[R2-bgp]peer 23.0.0.2 as-number 200
[R2-bgp]import-route ospf 1     ospf 引入BGP中
[R2-bgp]peer 5.5.5.5 next-hop-local
[R2-bgp]network 23.0.0.0 30

[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 23.0.0.2 24
[R3]int LoopBack 0
[R3-LoopBack0]ip add 3.3.3.3 32
[R3]rip 1
[R3-rip-1]version 2
[R3-rip-1]network 23.0.0.0
[R3-rip-1]network 3.0.0.0
[R3-bgp]bgp 200
[R3-bgp]router-id 3.3.3.3
[R3-bgp]peer 23.0.0.2 as-number 100
[R3-bgp]network 3.3.3.3 32   把3.3.3.3的网段引入BGP
[R3-bgp]peer 2.2.2.2 next-hop-local

其中需要注意一点的是 配置下一跳的时候需要等待一会：