weixin_57029593的博客

基于Android/linux平台的专属驱动，适用于ICM-42670/ICM-42680/ICM-42607等型号。 Components ---------- * hardware/invensense/linux-icm20xxx: Linux driver for kernel 3.18/4.4/4.9/4.14/5.4 version 9.2.2-test1 * hardware/invensense/sensors: Android Sensors HAL version icm20xxx-9.3.0-simple-android-linux-test1 * hardware/invensense/firmware: icm4x6xx board config * hardware/invensense/tools: test applications to stream sensor data Linux kernel driver integration ------------------------------- For integration linux

Invensense6轴陀螺仪 The MPU-6887P is a 6-axis MotionTracking device that combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 3x3x0.75mm (16-pin LGA) package. It also features a 512-byte FIFO that can lower the traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. MPU-6887P, with its 6-axis integration, enables manufacturers to eliminate the costly and complex selection.

The ICM-42607-P is a high performance 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and SPI serial communication, features up to 2.25 Kbytes FIFO and 2 programmable interrupts with ultra-low-power wake-on-motion support to minimize system power consumption.

Invensene的mems陀螺仪。可用于手机，手表等产品。 The ICM-40607-P is a high performance 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and SPI serial communication, features up to 2.25 Kbytes FIFO and 2 programmable interrupts with ultra-low-power wake-on-motion support to minimize system power consumption.

爱盛IST8810地磁sensor

PS-Ixx-2021A-00 v2 2.pdf

PS-MPU-6885A-00 v1.0.pdf

PS-MPU-6100A-00v1.2.pdf

RM-ITG-3050.pdf

MPU-60X0寄存器中文版V4.0.pdf