配置CAPWAP双栈覆盖业务示例
组网图形
图1 配置CAPWAP双栈覆盖业务示例组网图
数据规划
| 配置项 | 数据 |
|---|---|
| DHCP服务器 | AC作为DHCP服务器为STA和AP分配IPv4和IPv6地址 |
| AP的IP地址池 | IPv4地址池：10.23.100.2～10.23.100.254/24 IPv6地址池：FC01::2～FC01::FFFF:FFFF:FFFF:FFFF/64 |
| STA的IP地址池 | IPv4地址池：10.23.101.2～10.23.101.254/24 IPv6地址池：FC02::2～FC01::FFFF:FFFF:FFFF:FFFF/64 |
| AC的源接口IP地址 | IPv4源接口，VLANIF100：10.23.100.1/24 IPv6源接口，VLANIF200：FC01::1/64 |
| AP组 |
|
| 域管理模板 |
|
| SSID模板 |
|
| 安全模板 |
|
| VAP模板 |
|
配置注意事项
-
建议在与AP直连的设备接口上配置端口隔离，如果不配置端口隔离，尤其是业务数据转发方式采用直接转发时，可能会在VLAN内形成大量不必要的广播报文，导致网络阻塞，影响用户体验。
-
隧道转发模式下，管理VLAN和业务VLAN不能配置为同一VLAN，且AP和AC之间只能放通管理VLAN，不能放通业务VLAN。
- V200R021C00版本开始，配置CAPWAP源接口或源地址时，会检查和安全相关的配置是否已存在，包括DTLS加密的PSK、AC间DTLS加密的PSK、登录AP的用户名和密码、全局离线管理VAP的登录密码，均已存在才能成功配置，否则会提示用户先完成相关的配置。
- V200R021C00版本开始，AC默认开启CAPWAP控制隧道的DTLS加密功能。开启该功能，添加AP时AP会上线失败，此时需要先开启CAPWAP DTLS不认证方式（capwap dtls no-auth enable）让AP上线，以便AP获取安全凭证，AP上线后应及时关闭该功能（undo capwap dtls no-auth enable），避免未授权AP上线。
操作步骤
- 配置周边设备
# 配置接入交换机SwitchA的GE0/0/3接口加入VLAN100和VLAN200，GE0/0/1接口加入VLAN100，GE0/0/2接口加入VLAN200。GE0/0/1的缺省VLAN为VLAN100，GE0/0/2的缺省VLAN为VLAN200。
<span style="color:#333333"><span style="background-color:#dddddd"><HUAWEI> <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1146903825190921">system-view</strong> [HUAWEI] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b463515027190921">sysname SwitchA</strong> [SwitchA] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b684133584190921">vlan batch 100 200</strong> [SwitchA] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b349530513190921">interface gigabitethernet 0/0/1</strong> [SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1802463456190921">port link-type trunk</strong> [SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2124958755190921">port trunk pvid vlan 100</strong> [SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1108429115190921">port trunk allow-pass vlan 100</strong> [SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1000224051190921">port-isolate enable</strong> [SwitchA-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b954510642190921">quit</strong> [SwitchA] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b401575179190921">interface gigabitethernet 0/0/2</strong> [SwitchA-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b380788726190921">port link-type trunk</strong> [SwitchA-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1264265401190921">port trunk pvid vlan 200</strong> [SwitchA-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b99983235190921">port trunk allow-pass vlan 200</strong> [SwitchA-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1929474773190921">port-isolate enable</strong> [SwitchA-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1004340122190921">quit</strong> [SwitchA] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1024798479190921">interface gigabitethernet 0/0/3</strong> [SwitchA-GigabitEthernet0/0/3] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b304393179190921">port link-type trunk</strong> [SwitchA-GigabitEthernet0/0/3] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b135158159190921">port trunk allow-pass vlan 100 200</strong> [SwitchA-GigabitEthernet0/0/3] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2113434684190921">quit</strong></span></span># 配置Router的接口GE1/0/0加入VLAN101，创建接口VLANIF101并配置IPv4地址为10.23.101.2/24，IPv6地址为FC02::2/64。<span style="color:#333333"><span style="background-color:#dddddd"><Huawei> <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b801752566190921">system-view</strong> [Huawei] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2046819583190921">sysname Router</strong> [Router] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1047582369190921">ipv6</strong> [Router] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b975131926190921">vlan batch 101</strong> [Router] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b274648767190921">interface gigabitethernet 1/0/0</strong> [Router-GigabitEthernet1/0/0] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b170732701190921">port link-type trunk</strong> [Router-GigabitEthernet1/0/0] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1177536734190921">port trunk allow-pass vlan 101</strong> [Router-GigabitEthernet1/0/0] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b623966701190921">quit</strong> [Router] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b317992853190921">interface vlanif 101</strong> [Router-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b315213745190921">ip address 10.23.101.2 24</strong> [Router-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b753826984190921">ipv6 enable</strong> [Router-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b267641225190921">ipv6 address fc02::2/64</strong> [Router-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b104793727190921">quit</strong></span></span> - 配置AC与其它网络设备互通
# 配置AC的接口GE0/0/1加入VLAN100和VLAN200，GE0/0/2加入VLAN101。
<span style="color:#333333"><span style="background-color:#dddddd"><HUAWEI> <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b409287315190921">system-view</strong> [HUAWEI] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b258544766190921">sysname AC</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b462287671190921">vlan batch 100 101 200</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1272913455190921">interface gigabitethernet 0/0/1</strong> [AC-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2071743092190921">port link-type trunk</strong> [AC-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1616165139190921">port trunk allow-pass vlan 100 200</strong> [AC-GigabitEthernet0/0/1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b659029378190921">quit</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1073059659190921">interface gigabitethernet 0/0/2</strong> [AC-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1788644183190921">port link-type trunk</strong> [AC-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b193824250190921">port trunk allow-pass vlan 101</strong> [AC-GigabitEthernet0/0/2] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b463825630190921">quit</strong></span></span> - 配置DHCP服务器为STA和AP分配IP地址
# 在AC上配置VLANIF100接口为AP提供IPv4地址。
<span style="color:#333333"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2031153250190921">dhcp enable</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1919289615190921">interface vlanif 100</strong> [AC-Vlanif100] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1992126686190921">ip address 10.23.100.1 24</strong> [AC-Vlanif100] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b919882756190921">dhcp select interface</strong> [AC-Vlanif100] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b491849206190921">quit</strong></span></span># 在AC上配置VLANIF200接口为AP提供IPv6地址。<span style="color:#333333"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b282758585190921">ipv6</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1551206228190921">dhcp enable</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1500838037190921">dhcpv6 pool ap_pool</strong> [AC-dhcpv6-pool-ap_pool] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1095101125190921">address prefix fc01::/64</strong> [AC-dhcpv6-pool-ap_pool] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b841316139190921">quit</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b594802203190921">interface vlanif 200</strong> [AC-Vlanif200] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b515676449190921">ipv6 enable</strong> [AC-Vlanif200] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b848332534190921">ipv6 address fc01::1/64</strong> [AC-Vlanif200] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1463722663190921">undo ipv6 nd ra halt</strong> [AC-Vlanif200] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b816660201190921">ipv6 nd autoconfig managed-address-flag</strong> [AC-Vlanif200] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b645244955190921">ipv6 nd autoconfig other-flag</strong> [AC-Vlanif200] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b252317981190921">dhcpv6 server ap_pool</strong> [AC-Vlanif200] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b706748190190921">quit</strong></span></span># 配置VLANIF101接口下的DHCPv4服务器和DHCPv6服务器为STA提供IP地址。<span style="color:#333333"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b641090635190921">dhcpv6 pool sta_pool</strong> [AC-dhcpv6-pool-sta_pool] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1751044090190921">address prefix fc02::/64</strong> [AC-dhcpv6-pool-sta_pool] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1722622819190921">quit</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b367244197190921">interface vlanif 101</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1714639538190921">ipv6 enable</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1200084554190921">ip address 10.23.101.1 24</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b185655870190921">dhcp select interface</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1006631249190921">ipv6 address fc02::1/64</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b498718114190921">undo ipv6 nd ra halt</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b458421855190921">ipv6 nd autoconfig managed-address-flag</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b963188944190921">ipv6 nd autoconfig other-flag</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b785579188190921">dhcpv6 server sta_pool</strong> [AC-Vlanif101] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b984519419190921">quit</strong></span></span> - 配置AP上线
# 创建AP组，按照区域进行AP组划分，将同一区域的AP都加入同一AP组中，并限制AP上线的IP版本号。
<span style="color:#333333"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b365287240190921">wlan</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1447263166190921">ap-group name ap-group_ipv4</strong> [AC-wlan-ap-group-ap-group_ipv4] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1817702868190921">ap ip version ipv4</strong> Warning: This operation may cause AP offline, Whether to continue? [Y/N]:<strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b493869597190921">y</strong> [AC-wlan-ap-group-ap-group_ipv4] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1754560141190921">quit</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1397728233190921">ap-group name ap-group_ipv6</strong> [AC-wlan-ap-group-ap-group_ipv6] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1797571532190921">ap ip version ipv6</strong> Warning: This operation may cause AP offline, Whether to continue? [Y/N]:<strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1300257284190921">y</strong> [AC-wlan-ap-group-ap-group_ipv6] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1806089294190921">quit</strong></span></span># 创建域管理模板，在域管理模板下配置AC的国家码并在AP组下引用域管理模板。<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1471718217190921">regulatory-domain-profile name default</strong> [AC-wlan-regulate-domain-default] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1546732354190921">country-code cn</strong> [AC-wlan-regulate-domain-default] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b551047239190921">quit</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1222516225190921">ap-group name ap-group_ipv4</strong> [AC-wlan-ap-group-ap-group_ipv4] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b171327823190921">regulatory-domain-profile default</strong> Warning: Modifying the country code will clear channel, power and antenna gain configurations of the radio and reset the AP. Continue?[Y/N]:<strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0175818418_b17491131153716">y</strong> [AC-wlan-ap-group-ap-group_ipv4] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2043440440190921">quit</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b112872736190921">ap-group name ap-group_ipv6</strong> [AC-wlan-ap-group-ap-group_ipv6] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b112345448190921">regulatory-domain-profile default</strong> Warning: Modifying the country code will clear channel, power and antenna gain configurations of the radio and reset the AP. Continue?[Y/N]:<strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0175818418_b17491131153716_1">y</strong> [AC-wlan-ap-group-ap-group_ipv6] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2076171109190921">quit</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1606241424190921">quit</strong></span></span># 配置AC的源接口。<span style="color:#333333"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b729907539190921">capwap double-stack enable</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b383709760190921">capwap source interface vlanif 100</strong> [AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1791385488190921">capwap source interface vlanif 200</strong></span></span># 在AC上离线导入AP，并将AP分别加入AP组“ap-group_ipv4”和“ap-group_ipv6”中。假设AP1的MAC地址为dcd2-fcf6-76a0，AP2的MAC地址为60de-4476-e360。ap auth-mode命令缺省情况下为MAC认证，如果之前没有修改其缺省配置，可以不用执行ap auth-mode mac-auth。
举例中使用的AP为AP5030DN，具有射频0和射频1两个射频。AP5030DN的射频0为2.4GHz射频，射频1为5GHz射频。
<span style="color:#333333"><span style="background-color:#dddddd">[AC] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1685093122190921">wlan</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b810555749190921">ap auth-mode mac-auth</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1890175338190921">ap-id 0 ap-mac dcd2-fcf6-76a0</strong> [AC-wlan-ap-0] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b589690059190921">ap-name ap1</strong> Warning: This operation may cause AP reset. Continue? [Y/N]:<strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0175818418_b460951517190906">y</strong> [AC-wlan-ap-0] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1423457549190921">ap-group ap-group_ipv4</strong> Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration s of the radio, Whether to continue? [Y/N]:<strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0175818418_b1651706244190906">y</strong> [AC-wlan-ap-0] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2049187955190921">quit</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2095850087190921">ap-id 1 ap-mac 60de-4476-e360</strong> [AC-wlan-ap-1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b558610791190921">ap-name ap2</strong> Warning: This operation may cause AP reset. Continue? [Y/N]:<strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0175818418_b460951517190906_1">y</strong> [AC-wlan-ap-1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1953558661190921">ap-group ap-group_ipv6</strong> Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration s of the radio, Whether to continue? [Y/N]:<strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0175818418_b1651706244190906_1">y</strong> [AC-wlan-ap-1] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b2026336380190921">quit</strong></span></span># 将AP上电后，当执行命令display ap all查看到AP的“State”字段为“nor”时，表示AP正常上线。
<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b532733656190921">display ap all</strong> Total AP information: nor : normal [2] Extrainfo : Extra information P : insufficient power supply ---------------------------------------------------------------------------------------------------- ID MAC Name Group IP Type State STA Uptime ExtraInfo ---------------------------------------------------------------------------------------------------- 0 dcd2-fcf6-76a0 ap1 ap-group_ipv4 10.23.100.138 AP5030DN nor 0 4H:49M:11S P 1 60de-4476-e360 ap2 ap-group_ipv6 FC01::9 AP5030DN nor 0 6H:3M:40S - ---------------------------------------------------------------------------------------------------- Total: 2, printed: 2</span></span> - 配置WLAN业务参数
# 开启设备处理STA IPv6业务的功能。
<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b846697653190921">sta-ipv6-service enable</strong></span></span># 创建名为“wlan-net”的安全模板，并配置安全策略。举例中以配置WPA-WPA2+PSK+AES的安全策略为例，密码为“a1234567”，实际配置中请根据实际情况，配置符合实际要求的安全策略。
<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b1991067776190921">security-profile name wlan-net</strong> [AC-wlan-sec-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b851752672190921">security wpa-wpa2 psk pass-phrase a1234567 aes</strong> [AC-wlan-sec-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b337241812190921">quit</strong></span></span># 创建名为“wlan-net”的SSID模板，并配置SSID名称为“wlan-net”。<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b69022931190921">ssid-profile name wlan-net</strong> [AC-wlan-ssid-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b36723145190921">ssid wlan-net</strong> [AC-wlan-ssid-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b1738903244190921">quit</strong></span></span># 创建名为“wlan-net”的VAP模板，配置业务数据转发模式、业务VLAN，并且引用安全模板和SSID模板。<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b1922555320190921">vap-profile name wlan-net</strong> [AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b13690656190921">forward-mode tunnel</strong> [AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b1155220284190921">service-vlan vlan-id 101</strong> [AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b1928564414190921">security-profile wlan-net</strong> [AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b889800077190921">ssid-profile wlan-net</strong> [AC-wlan-vap-prof-wlan-net] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_zh-cn_task_0176912351_b1869922190190921">quit</strong></span></span># 配置AP组引用VAP模板，AP上射频0和射频1都使用VAP模板“wlan-net”的配置。<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b596297300190921">ap-group name ap-group_ipv4</strong> [AC-wlan-ap-group-ap-group_ipv4] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1053401689190921">vap-profile wlan-net wlan 1 radio 0</strong> [AC-wlan-ap-group-ap-group_ipv4] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1326365763190921">vap-profile wlan-net wlan 1 radio 1</strong> [AC-wlan-ap-group-ap-group_ipv4] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1503401936190921">quit</strong> [AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b515217240190921">ap-group name ap-group_ipv6</strong> [AC-wlan-ap-group-ap-group_ipv6] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1354279984190921">vap-profile wlan-net wlan 1 radio 0</strong> [AC-wlan-ap-group-ap-group_ipv6] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b1401457371190921">vap-profile wlan-net wlan 1 radio 1</strong> [AC-wlan-ap-group-ap-group_ipv6] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b766778827190921">quit</strong></span></span> - 验证配置结果
WLAN业务配置会自动下发给AP，配置完成后，通过执行命令display vap ssid wlan-net查看如下信息，当“Status”项显示为“ON”时，表示AP对应的射频上的VAP已创建成功。
<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b730482450190921">display vap ssid wlan-net</strong> WID : WLAN ID ------------------------------------------------------------------------------------- AP ID AP name RfID WID BSSID Status Auth type STA SSID ------------------------------------------------------------------------------------- 1 ap1 0 1 DCD2-FCF6-76A0 ON WPA/WPA2-PSK 0 wlan-net 1 ap1 1 1 DCD2-FCF6-76B0 ON WPA/WPA2-PSK 0 wlan-net 2 ap2 0 1 60DE-4474-E360 ON WPA/WPA2-PSK 0 wlan-net 2 ap2 1 1 60DE-4474-E370 ON WPA/WPA2-PSK 0 wlan-net ------------------------------------------------------------------------------------- Total: 4</span></span>STA搜索到名为“wlan-net”的无线网络，输入密码“a1234567”并正常关联后，在AC上执行display station ssid wlan-net命令，可以查看到用户已经接入到无线网络“wlan-net”中。<span style="color:#333333"><span style="background-color:#dddddd">[AC-wlan-view] <strong id="ZH-CN_TASK_0180383115__zh-cn_task_0176912366_b143519703190921">display station ssid wlan-net</strong> Rf/WLAN: Radio ID/WLAN ID Rx/Tx: link receive rate/link transmit rate(Mbps) ------------------------------------------------------------------------------------------------------------------------------------------------ STA MAC AP ID Ap name Rf/WLAN Band Type Rx/Tx RSSI VLAN IPv4 address SSID IPv6 address ------------------------------------------------------------------------------------------------------------------------------------------------ 508f-4cfb-0556 1 ap1 1/1 5G - -/- - 101 10.23.101.164 wlan-net FC02::A48F:A256:29D:8841 c894-bbdc-99ae 2 ap2 1/1 5G - -/- - 101 10.23.101.204 wlan-net FC02::7057:14F:2211:7FA0 ------------------------------------------------------------------------------------------------------------------------------------------------ Total: 2 2.4G: 0 5G: 2</span></span>
配置文件
- SwitchA的配置文件
<span style="color:#333333"><span style="background-color:#dddddd"># sysname SwitchA # vlan batch 100 200 # interface GigabitEthernet0/0/1 port link-type trunk port trunk pvid vlan 100 port trunk allow-pass vlan 100 port-isolate enable group 1 # interface GigabitEthernet0/0/2 port link-type trunk port trunk pvid vlan 200 port trunk allow-pass vlan 200 port-isolate enable group 1 # interface GigabitEthernet0/0/3 port link-type trunk port trunk allow-pass vlan 100 200 # return </span></span> -
Router的配置文件
<span style="color:#333333"><span style="background-color:#dddddd"># sysname Router # ipv6 # vlan batch 101 # interface Vlanif101 ipv6 enable ip address 10.23.101.2 255.255.255.0 ipv6 address FC02::2/64 # interface GigabitEthernet1/0/0 port link-type trunk port trunk allow-pass vlan 101 # return </span></span> -
AC的配置文件
<span style="color:#333333"><span style="background-color:#dddddd"># sysname AC # ipv6 # vlan batch 100 to 101 200 # dhcp enable # dhcpv6 pool ap_pool address prefix FC01::/64 # dhcpv6 pool sta_pool address prefix FC02::/64 # interface Vlanif100 ip address 10.23.100.1 255.255.255.0 dhcp select interface # interface Vlanif101 ipv6 enable ip address 10.23.101.1 255.255.255.0 ipv6 address FC02::1/64 undo ipv6 nd ra halt ipv6 nd autoconfig managed-address-flag ipv6 nd autoconfig other-flag dhcp select interface dhcpv6 server sta_pool dhcp server excluded-ip-address 10.23.101.2 # interface Vlanif200 ipv6 enable ipv6 address FC01::1/64 undo ipv6 nd ra halt ipv6 nd autoconfig managed-address-flag ipv6 nd autoconfig other-flag dhcpv6 server ap_pool # interface GigabitEthernet0/0/1 port link-type trunk port trunk allow-pass vlan 100 200 # interface GigabitEthernet0/0/2 port link-type trunk port trunk allow-pass vlan 101 # capwap double-stack enable capwap source interface vlanif100 capwap source interface vlanif200 # wlan sta-ipv6-service enable security-profile name wlan-net security wpa-wpa2 psk pass-phrase %^%#m"tz0f>~7.[`^6RWdzwCy16hJj/Mc!,}s`X*B]}A%^%# aes ssid-profile name wlan-net ssid wlan-net vap-profile name wlan-net forward-mode tunnel service-vlan vlan-id 101 ssid-profile wlan-net security-profile wlan-net regulatory-domain-profile name default ap-group name ap-group_ipv4 ap ip version ipv4 radio 0 vap-profile wlan-net wlan 1 radio 1 vap-profile wlan-net wlan 1 ap-group name ap-group_ipv6 ap ip version ipv6 radio 0 vap-profile wlan-net wlan 1 radio 1 vap-profile wlan-net wlan 1 ap-id 0 type-id 35 ap-mac dcd2-fcf6-76a0 ap-sn 2102351KDVW0JB015457 ap-name ap1 ap-group ap-group_ipv4 ap-id 1 type-id 35 ap-mac 60de-4476-e360 ap-sn 21500831023GH9001248 ap-name ap2 ap-group ap-group_ipv6 # return</span></span>
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
