k8s单master集群搭建

最新推荐文章于 2024-03-21 19:46:33 发布

daydayup9527

最新推荐文章于 2024-03-21 19:46:33 发布

阅读量589

点赞数

分类专栏： kubenetes 文章标签： kubernetes linux docker

本文链接：https://blog.csdn.net/weixin_60092693/article/details/121867318

版权

kubenetes 专栏收录该内容

39 篇文章 4 订阅

订阅专栏

k8s单master集群搭建

一、初始化实验环境
二、初始化k8s集群

一、初始化实验环境

192.168.1.11 master 2核4G
192.168.1.12 node1 2核4G

1、各节点操作，yum源、停用防火墙，时间同步，关闭交换空间，selinux

[root@master ~]# curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo        
[root@master ~]# curl -o /etc/yum.repos.d/docker-ce.repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
[root@master ~]# cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
EOF
[root@master ~]# yum makecache fast
[root@master ~]# systemctl stop firewalld  && systemctl  disable  firewalld
[root@master ~]# yum -y install ntpdate
[root@master ~]# ntpdate cn.pool.ntp.org
10 Dec 08:39:05 ntpdate[1170]: step time server 139.199.214.202 offset -46807.740797 sec
[root@master ~]# crontab -e
* */1 * * * /usr/sbin/ntpdate   cn.pool.ntp.org
[root@master ~]# service crond restart
[root@master ~]# swapoff  -a
[root@master ~]# sed -i '/swap/s/^/#/' /etc/fstab
[root@master ~]# sed -i  's/SELINUX=enforcing/SELINUX=disabled/g'  /etc/selinux/config
[root@master ~]# reboot -f

2、修改内核参数，配置hosts文件

[root@master ~]# cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
[root@master ~]# modprobe br_netfilter
[root@master ~]# sysctl --system
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
[root@master ~]# echo 192.168.1.11  master >> /etc/hosts
[root@master ~]# echo 192.168.1.12  node1 >> /etc/hosts

3、配置桥接模式，开启IPVS

[root@master ~]# echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables
[root@master ~]# echo 1 >/proc/sys/net/bridge/bridge-nf-call-ip6tables
[root@master ~]# echo """
vm.swappiness = 0
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
""" > /etc/sysctl.conf
[root@master ~]# sysctl -p
[root@master ~]# cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
ipvs_modules="ip_vs ip_vs_lc ip_vs_wlc ip_vs_rr ip_vs_wrr ip_vs_lblc ip_vs_lblcr ip_vs_dh ip_vs_sh ip_vs_fo ip_vs_nq ip_vs_sed ip_vs_ftp nf_conntrack"
for kernel_module in \${ipvs_modules}; do
 /sbin/modinfo -F filename \${kernel_module} > /dev/null 2>&1
 if [ $? -eq 0 ]; then
 /sbin/modprobe \${kernel_module}
 fi
done
EOF
[root@master ~]# chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep ip_vs

4、安装docker 、kubeadm、kubelet，配置自启动

[root@master ~]# yum -y install docker-ce-19.03.7-3.el7
[root@master ~]# systemctl enable docker && systemctl start docker  && systemctl status docker
[root@master ~]# yum -y install kubeadm-1.18.2  kubelet-1.18.2
[root@master ~]# systemctl enable kubelet

5、导入镜像

[root@master ~]# ls *.gz
cordns.tar.gz  kube-apiserver.tar.gz           kube-proxy.tar.gz      pause.tar.gz
etcd.tar.gz    kube-controller-manager.tar.gz  kube-scheduler.tar.gz
[root@master ~]# for i  in `ls *.gz`;do docker load -i $i ;done

二、初始化k8s集群

1、master1节点初始化k8s集群

[root@master ~]# kubeadm init  --kubernetes-version=v1.18.2 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.1.11
**### 这里没有配置镜像仓库，如果配置了仓库，可以添加仓库的参数进行初始化
**## kubeadm init  --image-repository=镜像地址  --kubernetes-version=v1.18.2 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address 192.168.4.11
...
Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.1.11:6443 --token 5jp17c.r7b8hilfeike1mm7 \
    --discovery-token-ca-cert-hash sha256:65793aa2463d8beeeedcc524aef947a120c3af4e7172e9f1e39a4468e641edda

按照提示进行操作，此时nodes节点还未ready，因为网络插件未安装

[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
[root@master ~]# kubectl get nodes
NAME     STATUS     ROLES    AGE   VERSION
master   NotReady   master   44s   v1.18.2
[root@master ~]# kubectl get pods -n kube-system
coredns-7ff77c879f-j48h6         0/1      Pending  0  56s
coredns-7ff77c879f-lrb77         0/1      Pending  0  56s

2、安装网络插件calico

这里用到了镜像cni.tar.gz calico-node.tar.gz calico.yaml

[root@master ~]# vim calico.yaml
167               value: "can-reach=192.168.1.11"
181               value: "10.244.0.0/16"
kubectl apply -f calico.yaml
kubectl get nodes
NAME     STATUS   ROLES    AGE   VERSION
master1   Ready    master   46m   v1.18.2
kubectl get pods -n kube-system
NAME                            READY   STATUS    RESTARTS   AGE
coredns-66bff467f8-dqdd6         1/1     Running   0          47m
coredns-66bff467f8-qr5zg         1/1     Running   0          47m
[root@master1 ~]# kubectl get nodes
NAME      STATUS   ROLES    AGE   VERSION
master1   Ready    master   37m   v1.18.2

3、节点加入k8s集群

这里的token 和hash在master节点init的时候有提示

[root@master1 ~]# kubeadm join 192.168.1.11:6443 --token 5jp17c.r7b8hilfeike1mm7 \
    --discovery-token-ca-cert-hash sha256:65793aa2463d8beeeedcc524aef947a120c3af4e7172e9f1e39a4468e641edda
[root@master ~]# kubectl get nodes
NAME     STATUS   ROLES    AGE   VERSION
master   Ready    master   50m   v1.18.2
node1    Ready    <none>   24s   v1.18.2

master查看token、获取token_hash值

[root@master ~]#	 kubeadm token list
TOKEN                     TTL  ...
abcdef.0123456789abcdef   20h 
[root@master ~]# kubeadm token delete abcdef.0123456789abcdef
[root@master ~]# kubeadm token create --ttl=0				#创建永久的token
[root@master init]# kubeadm token list
TOKEN                     TTL  
il1smu.zavpln6h8awhujrw   <forever>						#token的id
[root@master ~]# openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der |openssl dgst -sha256 -hex				#获取token_hash值
writing RSA key
(stdin)= aa1323b38a641009b06f44f284170d808399c431fa33fe0ee28048b28c86be16