k8s单master--测试环境集群搭建

最新推荐文章于 2024-02-29 10:09:29 发布

daydayup9527

最新推荐文章于 2024-02-29 10:09:29 发布

阅读量442

点赞数

分类专栏： kubenetes 文章标签： kubernetes docker linux

本文链接：https://blog.csdn.net/weixin_60092693/article/details/127099105

版权

kubenetes 专栏收录该内容

39 篇文章 4 订阅

订阅专栏

一、准备实验环境

192.168.1.11 master 2核4G

192.168.1.12 node1 2核4G

二、初始化实验环境

[root@master ~]# curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo     
[root@master ~]# curl -o /etc/yum.repos.d/docker-ce.repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
[root@master ~]# cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
EOF
[root@master ~]# yum makecache fast

[root@master ~]# systemctl stop firewalld  && systemctl  disable  firewalld
[root@master ~]# yum -y install ntpdate
[root@master ~]# ntpdate cn.pool.ntp.org
26 Sep 22:56:20 ntpdate[1075]: adjust time server 139.199.214.202 offset -0.161591 sec

[root@master ~]# crontab -e
* */1 * * * /usr/sbin/ntpdate  cn.pool.ntp.org
[root@master ~]# service crond restart
[root@master ~]# swapoff  -a
[root@master ~]# sed -i '/swap/s/^/#/' /etc/fstab
[root@master ~]# sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
[root@master ~]# reboot -f

安装基础软件包，各个节点操作

[root@master ~]# yum -y install wget net-tools nfs-utils lrzsz gcc gcc-c++ make cmake libxml2-devel openssl-devel curl curl-devel unzip sudo ntp libaio-devel  vim ncurses-devel autoconf automake zlib-devel  python-devel epel-release openssh-server socat  ipvsadm conntrack ntpdate

修改内核参数，各个节点操作

[root@master ~]# cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
[root@master ~]# modprobe br_netfilter

[root@master ~]# sysctl --system
...
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1

配置hosts文件，各个节点操作

192.168.1.11  master
192.168.1.12  node1

配置master1到node1无密码登陆，配置master1到node1无密码登陆

[root@master ~]# ssh-keygen -t rsa
[root@master ~]# cd /root && ssh-copy-id -i .ssh/id_rsa.pub root@node1

安装kubernetes1.18.2

mkdir  /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
 "exec-opts": ["native.cgroupdriver=systemd"],
 "log-driver": "json-file",
 "log-opts": {
   "max-size": "100m"
  },
 "storage-driver": "overlay2",
 "storage-opts": [
   "overlay2.override_kernel_check=true"
  ]
}
EOF

yum -y install docker-ce-19.03.7-3.el7
systemctl enable docker && systemctl start docker && systemctl status docker

设置网桥包经IPTables，core文件生成路径，配置永久生效

echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables
echo 1 >/proc/sys/net/bridge/bridge-nf-call-ip6tables
echo """
vm.swappiness = 0
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
""" > /etc/sysctl.conf
sysctl -p

开启ipvs，不开启ipvs将会使用iptables，但是效率低，所以官网推荐需要开通ipvs内核

cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
ipvs_modules="ip_vs ip_vs_lc ip_vs_wlc ip_vs_rr ip_vs_wrr ip_vs_lblc ip_vs_lblcr ip_vs_dh ip_vs_sh ip_vs_fo ip_vs_nq ip_vs_sed ip_vs_ftp nf_conntrack"
for kernel_module in \${ipvs_modules}; do
 /sbin/modinfo -F filename \${kernel_module} > /dev/null 2>&1
 if [ $? -eq 0 ]; then
 /sbin/modprobe \${kernel_module}
 fi
done
EOF

chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep ip_vs

安装kubernetes1.18.2

yum -y install kubeadm-1.18.2  kubelet-1.18.2
systemctl enable kubelet

[root@master ~]# ls *.gz
1-18-cordns.tar.gz  1-18-kube-apiserver.tar.gz           1-18-kube-proxy.tar.gz      1-18-pause.tar.gz
1-18-etcd.tar.gz    1-18-kube-controller-manager.tar.gz  1-18-kube-scheduler.tar.gz
calico-node.tar.gz    cni.tar.gz
[root@master ~]# for i  in `ls *.gz`;do docker load -i $i ;done
[root@master ~]# docker images
REPOSITORY                           TAG            IMAGE ID       CREATED       SIZE
k8s.gcr.io/kube-proxy                v1.18.2        0d40868643c6   2 years ago   117MB
k8s.gcr.io/kube-controller-manager   v1.18.2        ace0a8c17ba9   2 years ago   162MB
k8s.gcr.io/kube-apiserver            v1.18.2        6ed75ad404bd   2 years ago   173MB
k8s.gcr.io/kube-scheduler            v1.18.2        a3099161e137   2 years ago   95.3MB
k8s.gcr.io/pause                     3.2            80d28bedfe5d   2 years ago   683kB
k8s.gcr.io/coredns                   1.6.7          67da37a9a360   2 years ago   43.8MB
k8s.gcr.io/etcd                      3.4.3-0        303ce5db0e90   2 years ago   288MB
[root@node1 ~]# docker images
REPOSITORY              TAG       IMAGE ID       CREATED       SIZE
k8s.gcr.io/kube-proxy   v1.18.2   0d40868643c6   2 years ago   117MB
k8s.gcr.io/pause        3.2       80d28bedfe5d   2 years ago   683kB

初始化k8s集群

kubeadm init --kubernetes-version=v1.18.2 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.1.11

注：如果没有上传镜像到各个节点，那么用下面的方法初始化k8s集群：

kubeadm init --image-repository=registry.aliyuncs.com/google_containers --kubernetes-version=v1.18.2 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address 192.168.1.11

初始化命令执行成功之后显示如下内容，说明初始化成功了

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.1.11:6443 --token 4laf0k.rsh962h3mxvgv96d \
    --discovery-token-ca-cert-hash sha256:814273ecb7350f04ee62fdd44559200e4e013edd1e529d35eae60b4b5aff5ba8

[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
[root@master ~]# kubectl get nodes
NAME     STATUS     ROLES    AGE   VERSION
master   NotReady   master   44s   v1.18.2
kubectl get pods -n kube-system   #cordns也是处于pending状态

手动上传上面两个镜像的压缩包到各个节点，通过docker load -i解压

docker load -i  cni.tar.gz
docker load -i  calico-node.tar.gz

在master节点执行如下：

[root@master ~]# vim calico.yaml
167               value: "can-reach=192.168.1.11"
kubectl apply -f calico.yaml
kubectl get nodes
NAME     STATUS   ROLES    AGE   VERSION
master1   Ready    master   46m   v1.18.2
kubectl get pods -n kube-system
NAME                            READY   STATUS    RESTARTS   AGE
coredns-66bff467f8-dqdd6         1/1     Running   0          47m
coredns-66bff467f8-qr5zg         1/1     Running   0          47m

把node1节点加入到k8s集群，在node1节点操作

这里使用了永久的token

[root@master ~]# kubeadm token list
[root@master ~]# kubeadm token create --ttl=0
W0928 23:07:18.994752   14297 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]
srd9aw.kbvkg6aqui9x9alu
[root@master ~]# kubeadm token list
TOKEN                     TTL         EXPIRES   USAGES                   DESCRIPTION                                                EXTRA GROUPS
srd9aw.kbvkg6aqui9x9alu   <forever>   <never>   authentication,signing   <none>                                                     system:bootstrappers:kubeadm:default-node-token
[root@master ~]# openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der |openssl dgst -sha256 -hex
writing RSA key
(stdin)= 814273ecb7350f04ee62fdd44559200e4e013edd1e529d35eae60b4b5aff5ba8

[root@node1 ~]# kubeadm join 192.168.1.11:6443 --token srd9aw.kbvkg6aqui9x9alu \
    --discovery-token-ca-cert-hash sha256:814273ecb7350f04ee62fdd44559200e4e013edd1e529d35eae60b4b5aff5ba8

在master1节点查看集群节点状态

[root@master ~]# kubectl get node
NAME     STATUS   ROLES    AGE     VERSION
master   Ready    master   20m     v1.18.2
node1    Ready    <none>   2m24s   v1.18.2

TAB键的补齐

[root@master ~]# kubectl completion bash >/etc/bash_completion.d/kubectl
[root@master ~]# kubeadm completion bash >/etc/bash_completion.d/kubeadm
[root@master ~]# exit       #退出再进生效
[root@master ~]# kubectl		Tab  Tab

安装traefik (每个节点都要)

docker load -i traefik_1_7_9.tar.gz   #traefik用到的镜像是k8s.gcr.io/traefik:1.7.9

1）生成traefik证书，在master上操作

[root@master ~]# mkdir ikube/tls -p
[root@master ~]# echo """
[req]
distinguished_name = req_distinguished_name
prompt = yes

[ req_distinguished_name ]
countryName = Country Name (2 letter code)
countryName_value=CN

stateOrProvinceName = State or Province Name (full name)
stateOrProvinceName_value    = Beijing

localityName= Locality Name (eg, city)
localityName_value = Haidian

organizationName  = Organization Name (eg, company)
organizationName_value = Channelsoft

organizationalUnitName = Organizational Unit Name (eg, section)
organizationalUnitName_value  = R & D Department

commonName = Common Name (eg, your name or your server\'s hostname)
commonName_value = *.multi.io

emailAddress = Email Address
emailAddress_value = lentil1016@gmail.com
""" > ikube/tls/openssl.cnf
[root@master ~]# openssl req -newkey rsa:4096 -nodes -config ~/ikube/tls/openssl.cnf -days 3650 -x509 -out ~/ikube/tls/tls.crt -keyout ~/ikube/tls/tls.key
[root@master ~]# kubectl create -n kube-system secret tls ssl --cert ~/ikube/tls/tls.crt --key ~/ikube/tls/tls.key
secret/ssl created

2）执行yaml文件，创建traefik

[root@master ~]# kubectl apply -f traefik.yaml
clusterrole.rbac.authorization.k8s.io/traefik-ingress-controller created
clusterrolebinding.rbac.authorization.k8s.io/traefik-ingress-controller created
serviceaccount/traefik-ingress-controller created
configmap/traefik-conf created
daemonset.apps/traefik-ingress-controller created
service/traefik-ingress-service created
service/traefik-web-ui created
ingress.extensions/traefik-web-ui created

3）查看traefik是否部署成功：

[root@master ~]#  kubectl get pod -n kube-system -owide |grep traefik
traefik-ingress-controller-2mxsm   1/1     Running   0          61s   192.168.1.12   node1    <none>           <none>
traefik-ingress-controller-tgbk7   1/1     Running   0          61s   192.168.1.11   master   <none>           <none>

安装kubernetes-dashboard-2版本（kubernetes的web ui界面）

docker load -i dashboard_2_0_0.tar.gz
docker load -i metrics-scrapter-1-0-1.tar.gz

在master1节点操作

[root@master ~]# kubectl apply -f kubernetes-dashboard.yaml
namespace/kubernetes-dashboard created
serviceaccount/kubernetes-dashboard created
service/kubernetes-dashboard created
secret/kubernetes-dashboard-certs created
secret/kubernetes-dashboard-csrf created
secret/kubernetes-dashboard-key-holder created
configmap/kubernetes-dashboard-settings created
role.rbac.authorization.k8s.io/kubernetes-dashboard created
clusterrole.rbac.authorization.k8s.io/kubernetes-dashboard created
rolebinding.rbac.authorization.k8s.io/kubernetes-dashboard created
clusterrolebinding.rbac.authorization.k8s.io/kubernetes-dashboard created
deployment.apps/kubernetes-dashboard created
service/dashboard-metrics-scraper created
deployment.apps/dashboard-metrics-scraper created

查看dashboard是否安装成功：

[root@master ~]# kubectl get pods -n kubernetes-dashboard   #等一下
NAME                                         READY   STATUS    RESTARTS   AGE
dashboard-metrics-scraper-694557449d-km562   1/1     Running   0          2m26s
kubernetes-dashboard-5f98bdb684-ssmx9        1/1     Running   0          2m26s

查看dashboard前端的service

[root@master1 ~]# kubectl get svc -n kubernetes-dashboard
NAME                        TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)    AGE
dashboard-metrics-scraper   ClusterIP   10.107.91.74   <none>       8000/TCP   49s
kubernetes-dashboard        ClusterIP   10.99.59.88    <none>     443/TCP    50s

修改service type类型变成NodePort：clusterIP只能集群内部访问
kubectl edit svc kubernetes-dashboard -n kubernetes-dashboard
     28   type: NodePort
[root@master1 ~]# kubectl get svc -n kubernetes-dashboard
NAME                        TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)         AGE
dashboard-metrics-scraper   ClusterIP   10.107.91.74   <none>        8000/TCP        11m
kubernetes-dashboard        NodePort    10.99.59.88    <none>        443:30260/TCP   11m

火狐浏览器访问https://192.168.1.11:31398/#/login 加密

在这里插入图片描述
通过yaml文件里指定的默认的token登陆dashboard

1）查看kubernetes-dashboard名称空间下的secret
[root@master1 ~]# kubectl get secret -n kubernetes-dashboard
NAME                               TYPE                                  DATA   AGE
default-token-wzcwc                kubernetes.io/service-account-token   3      16m
kubernetes-dashboard-certs         Opaque                                0      16m
kubernetes-dashboard-csrf          Opaque                                1      16m
kubernetes-dashboard-key-holder    Opaque                                2      16m
kubernetes-dashboard-token-lqws6   kubernetes.io/service-account-token   3      16m

2）找到对应的带有token的kubernetes-dashboard-token
[root@master ~]# kubectl describe secret kubernetes-dashboard-token-64xsg -n kubernetes-dashboard
Name:         kubernetes-dashboard-token-64xsg
Namespace:    kubernetes-dashboard
Labels:       <none>
Annotations:  kubernetes.io/service-account.name: kubernetes-dashboard
              kubernetes.io/service-account.uid: 29db23b4-dc7a-42d0-963d-b7e1d2090967

Type:  kubernetes.io/service-account-token

Data
====
ca.crt:     1025 bytes
namespace:  20 bytes
token:      eyJhbGciOiJSUzI1NiIsImtpZCI6......

点击sing in登陆，显示如下，默认是只能看到default名称空间内容

点击sing in登陆，显示如下，默认是只能看到default名称空间内容
在这里插入图片描述

3.2 创建管理员token，可查看任何空间权限

[root@master1 ~]# kubectl create clusterrolebinding dashboard-cluster-admin --clusterrole=cluster-admin --serviceaccount=kubernetes-dashboard:kubernetes-dashboard

刷新就可以看到和操作任何名称空间的资源了

在这里插入图片描述
dashboard可以做到一定的可视化及维护，但部署资源文件的时候还需要手写

安装metrics插件

[root@master ~]# kubectl top nodes
error: Metrics API not available
 docker load -i metrics-server-amd64_0_3_1.tar.gz ;docker load -i addon.tar.gz
[root@master ~]# kubectl apply -f metrics.yaml
[root@master ~]# kubectl get pod -n kube-system -owide
metrics-server-8459f8db8c-r6mrz    2/2     Running   0          43s    10.244.3.4     node1
[root@master ~]#  kubectl top nodes
NAME      CPU(cores)   CPU%   MEMORY(bytes)   MEMORY%
master1   225m         11%    1220Mi          70%
node1     97m          4%     671Mi           39%
[root@master1 ~]# kubectl top pods -n kube-system
NAME                               CPU(cores)   MEMORY(bytes)
calico-node-5rk6g                  21m          29Mi
coredns-66bff467f8-hnwkm         3m           10Mi
etcd-master1                       57m          89Mi
上面如果看到metrics-server-8459f8db8c-5p59m是running状态，说明metrics-server组件部署成功了

关于kubeconfig文件制作可以看之前的文章
https://blog.csdn.net/weixin_60092693/article/details/122521981