Mstp的负载均衡

实验目的
-实现两台PC之间互通
-并且让数据走最优路径
-实现主根、次根并互为备份

配置思路
-给pc配置ip地址
-给交换机配置名称并且关闭日志
-创建valn
-吧交换机端口模式分别设置为Access和Trunk模式
-（交换机之间用Trunk模式，交换机和其他设备用Access模式）
-设置模式并且配置允许通过的vlan
-路由器的配置
-给路由器取名并且关闭日志
-给端口配置IP地址

脚本

undo terminal monitor 
system-view 
sysname SW3
vlan batch 10 20
interface Ethernet0/0/1
port link-type access 
port default vlan 10
quit
interface Ethernet0/0/2
port link-type access 
port default vlan 20
quit
port-group group-member Ethernet 0/0/3 Ethernet 0/0/4
port link-type trunk 
port trunk allow-pass vlan all 
quit 

undo terminal monitor 
system-view 
sysname SW1
vlan batch 10 20
port-group group-member Ethernet 0/0/3 Ethernet 0/0/10
port link-type trunk 
port trunk allow-pass  vlan all 
quit 
interface Ethernet0/0/1
port link-type access 
port default vlan 20
quit 

undo terminal monitor 
system-view 
sysname SW2
vlan batch 10 20
port-group group-member Ethernet 0/0/4 Ethernet 0/0/10
port link-type trunk 
port trunk allow-pass  vlan all 
quit 
interface Ethernet0/0/2
port link-type access 
port default vlan 10
quit 

undo terminal  monitor 
system-view 
sysname AR
interface GigabitEthernet 0/0/1
ip address 192.168.20.254 24
quit 
interface  GigabitEthernet 0/0/2
ip address 192.168.10.254 24
quit 

system-view 
stp mode mstp 
stp region-configuration
region-name HCIE
instance 10 vlan 10
instance 20 vlan 20
active region-configuration 
quit 
stp instance 10 priority 0
stp instance 20 priority 4096
stp instance 20 priority 0
stp instance 10 priority 4096
display stp instance 10 brief