AD7606使用系列篇1--ESP32

使用说明

在使用前，请先前往Micropython官网下载固件，下载固件后烧录，按下表连接杜邦线后即可使用。

AD7606板引脚	ESP32开发板引脚
+5V	VIN
GND	GND
D7	D10
RD	D14
CS	D27
RESET	D22
CA	D21
RANGE	D32
OS0	D25
OS1	D26
OS2	D33
BUSY	D23

Micropython代码

from machine import Pin, SPI, PWM
import time, array, sys
SAMPLING_POINTS = 10
nums = 0
# Define all pin
SPI_MISO_PIN = 12
SPI_MOSI_PIN = 13
SPI_SCK_PIN = 14
AD_CS_PIN = 27
AD_RESET_PIN = 22
AD_CONVST_PIN = 21
AD_RANGE_PIN = 32
AD_OS0_PIN = 25
AD_OS1_PIN = 26
AD_OS2_PIN = 33
AD_BUSY_PIN = 23
CS_PIN = Pin(AD_CS_PIN, Pin.OUT)
RESET_PIN = Pin(AD_RESET_PIN, Pin.OUT)
OS0_PIN = Pin(AD_OS0_PIN, Pin.OUT)
OS1_PIN = Pin(AD_OS1_PIN, Pin.OUT)
OS2_PIN = Pin(AD_OS2_PIN, Pin.OUT)
RANGE_PIN = Pin(AD_RANGE_PIN, Pin.OUT)
CONVST_PIN = Pin(AD_CONVST_PIN, Pin.OUT)
BUSY_PIN = Pin(AD_BUSY_PIN, Pin.IN, Pin.PULL_UP)
#BUSY_PIN.irq(trigger = Pin.IRQ_FALLING, handler = call_back)
num_rows = 8
num_columns = SAMPLING_POINTS
HSPI = SPI(1, baudrate=8000000, sck=Pin(SPI_SCK_PIN), mosi=Pin(SPI_MOSI_PIN), miso=Pin(SPI_MISO_PIN))
ad7606SamplingDoneFlag = 0

# Define buffer
data = [array.array('d', [0] * num_columns) for _ in range(num_rows)]

def AD7606_ESP32(RANGE = 1, OS = 0):
    global CS_PIN, RESET_PIN, CONVST_PIN, OS0_PIN, OS1_PIN, OS2_PIN, RANGE_PIN, ad7606SamplingDoneFlag
    # Initialize CS pin
    CS_PIN.on()
    
    # Reset AD7606
    RESET_PIN.off()
    time.sleep(0.001)
    RESET_PIN.on()
    time.sleep(0.001)
    RESET_PIN.off()

    # Start AD7606
    PWM0 = PWM(CONVST_PIN)
    freq = PWM0.freq()
    PWM0.freq(100000) 
    duty = PWM0.duty()
    PWM0.duty(1014)
    
    # Define OS pin
    MODE = OS
    M = [0, 0, 0]
    for i in range(3):
        M[i] = MODE % 2
        MODE = MODE // 2
    if M[0] == 1:
        OS0_PIN.on()
    else:
        OS0_PIN.off()
    if M[1] == 1:
        OS1_PIN.on()
    else:
        OS1_PIN.off()
    if M[2] == 1:
        OS2_PIN.on()
    else:
        OS2_PIN.off()
    if RANGE == 1:
        RANGE_PIN.on()
    else:
        RANGE_PIN.off()
        
    while True:
        if ad7606SamplingDoneFlag:
            PWM0.duty(0)
            CS_PIN.on()
            ad7606SamplingDoneFlag = 1
            break
    
def call_back(pin):
    global CS_PIN, array, nums, ad7606SamplingDoneFlag
    if pin == Pin(23):
        if nums < SAMPLING_POINTS:
            ad7606SamplingDoneFlag = 0
            for i in range(8):
                CS_PIN.off()
                buf = bytearray(2)
                HSPI.readinto(buf)
                first_byte = buf[0]
                first_bit = (first_byte >> 7) & 1
                if first_bit == 1:
                    data[i][nums] = int.from_bytes(buf, 'big')/65535 * 2 * 10 - 20
                else:
                    data[i][nums] = int.from_bytes(buf, 'big')/65535 * 2 * 10
                if i == 0:
                    print(data[i][nums])
                CS_PIN.on()
            nums = nums + 1
        else:
            ad7606SamplingDoneFlag = 1
 
if __name__=="__main__":
    BUSY_PIN.irq(trigger = Pin.IRQ_FALLING, handler = call_back)
    AD7606_ESP32(RANGE = 1, OS = 0)    

本人也将代码开源在Gitee上，有需要的可下载。
如有其他问题，可私信我。