思科交换机flash无法初始化，读取不到flash的解决方法

Boot Sector Filesystem (bs) installed, fsid: 2
Base ethernet MAC Address: 00:18:ba:e5:bd:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs: shadow_verify: mending data @ 0x5a180e0.
flashfs[0]: error initializing the root directory.
...done Initializing Flash.

The system has been interrupted, or encountered an error
during initializion of the flash filesystem.  The following
commands will initialize the flash filesystem, and finish
loading the operating system software:

    flash_init
    boot

switch: flash
Initializing Flash...
flashfs: shadow_verify: mending data @ 0x5a18048.
flashfs[0]: error initializing the root directory.------------问题：无法初始化
...done Initializing Flash.

switch: dir flash:
unable to stat flash:/: invalid argument----------读取不到flash

switch: 

解决：switch：format flash: 格式flash

switch: format flash:
Are you sure you want to format "flash:" (all data will be lost) (y/n)?y
flashfs[0]: 0 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 1024
flashfs[0]: Bytes available: 15997952
flashfs[0]: flashfs fsck took 9 seconds.
Filesystem "flash:" formatted

switch: 

switch: 

switch: dir flash:
Directory of flash:/

15997952 bytes available (1024 bytes used)--------格式flash后，已读到flash.

switch: