linux网络配置脚本

通过脚本，设置静态ip以及主机名

因为企业9的网络配置文件和企业7的不一样所以，我们以rhel9和rhel7为例

rhel7/centos7/openeuler

#!/bin/bash
cat > /etc/sysconfig/network-scripts/ifcfg-$1 << EOF
DEVICE=$1
ONBOOT=yes
BOOTPROTO=none
IPADDR1=$2
NETMASK1=255.255.255.0
GATEWAY1=192.168.10.2  # 网关根据主机网络网关进行修改
DNS1=114.114.114.114
NAME=$1
EOF

nmcli connection reload
nmcli connection up $1

hostnamectl set-hostname $3

cat > /etc/hosts << EOF
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
$2	$3
EOF

 

 注：根据脚本内容，在执行脚本后加入网卡，你要设定的ip以及我们的主机名

我们的rhel7，还是centos7，或者是华为的openeuler都可以使用

rhel-9

#!/bin/bash
rm -fr /etc/NetworkManager/system-connections/$1.nmconnection
cat > /etc/NetworkManager/system-connections/$1.nmconnection <<EOF
[connection]
id=$1
type=ethernet
interface-name=$1

[ipv4]
address1=$2/24,192.168.10.2
method=manual
dns=114.114.114.114;
EOF

chmod 600 /etc/NetworkManager/system-connections/$1.nmconnection
nmcli connection reload
nmcli connection up $1

hostnamectl hostname $3

cat > /etc/hosts <<EOF
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
$2	$3
EOF

注：我们的网关需要根据你自己主机网关进行修改

[root@rhel9-src ~]# bash vmset.sh ens160 192.168.10.200 node1
连接已成功激活（D-Bus 活动路径：/org/freedesktop/NetworkManager/ActiveConnection/3）
[root@rhel9-src ~]# cat /etc/hosts 
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.10.200	node1
[root@rhel9-src ~]# bash