vlan hcia

<Huawei>
<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]vl    
[Huawei]vlan ba    
[Huawei]vlan batch 2 3 4
Info: This operation may take a few seconds. Please wait for a moment...done.
[Huawei]
[Huawei]dis    
[Huawei]display vl    
[Huawei]display vlan
The total number of vlans is : 4
--------------------------------------------------------------------------------
U: Up;         D: Down;         TG: Tagged;         UT: Untagged;
MP: Vlan-mapping;               ST: Vlan-stacking;
#: ProtocolTransparent-vlan;    *: Management-vlan;
--------------------------------------------------------------------------------
VID  Type    Ports                                                          
--------------------------------------------------------------------------------
1    common  UT:Eth0/0/1(U)     Eth0/0/2(U)     Eth0/0/3(U)     Eth0/0/4(U)     
                Eth0/0/5(D)     Eth0/0/6(D)     Eth0/0/7(D)     Eth0/0/8(D)     
                Eth0/0/9(D)     Eth0/0/10(D)    Eth0/0/11(D)    Eth0/0/12(D)    
                Eth0/0/13(D)    Eth0/0/14(D)    Eth0/0/15(D)    Eth0/0/16(D)    
                Eth0/0/17(D)    Eth0/0/18(D)    Eth0/0/19(D)    Eth0/0/20(D)    
                Eth0/0/21(D)    Eth0/0/22(D)    GE0/0/1(D)      GE0/0/2(D)      
2    common  
3    common  
4    common  
VID  Status  Property      MAC-LRN Statistics Description      
--------------------------------------------------------------------------------
1    enable  default       enable  disable    VLAN 0001                         
2    enable  default       enable  disable    VLAN 0002                         
3    enable  default       enable  disable    VLAN 0003                         
4    enable  default       enable  disable    VLAN 0004                         
[Huawei]
[Huawei]int    
[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]po    
[Huawei-Ethernet0/0/2]port li    
[Huawei-Ethernet0/0/2]port link-    
[Huawei-Ethernet0/0/2]port link-flap    
[Huawei-Ethernet0/0/2]port link-type

[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]po    
[Huawei-Ethernet0/0/2]port li    
[Huawei-Ethernet0/0/2]port link-    
[Huawei-Ethernet0/0/2]port link-flap    
[Huawei-Ethernet0/0/2]port link-type ac    
[Huawei-Ethernet0/0/2]port link-type access 
[Huawei-Ethernet0/0/2]port de    
[Huawei-Ethernet0/0/2]port default vl    
[Huawei-Ethernet0/0/2]port default vlan 2
[Huawei-Ethernet0/0/2]quit
[Huawei]int    
[Huawei]interface e0/0/3
[Huawei-Ethernet0/0/3]po    
[Huawei-Ethernet0/0/3]port li    
[Huawei-Ethernet0/0/3]port link-    
[Huawei-Ethernet0/0/3]port link-flap    
[Huawei-Ethernet0/0/3]port link-type ac    
[Huawei-Ethernet0/0/3]port link-type access 
[Huawei-Ethernet0/0/3]po    
[Huawei-Ethernet0/0/3]portde    
[Huawei-Ethernet0/0/3]port de    
[Huawei-Ethernet0/0/3]port default vl    
[Huawei-Ethernet0/0/3]port default vlan 3
[Huawei-Ethernet0/0/3]int e0/0/4
[Huawei-Ethernet0/0/4]port link-type access 
[Huawei-Ethernet0/0/4]port link-type access 
[Huawei-Ethernet0/0/4]port default vlan 4
[Huawei-Ethernet0/0/4]quit
[Huawei]interface e0/0/1
[Huawei-Ethernet0/0/1]port link-type trunk
[Huawei-Ethernet0/0/1]
[Huawei-Ethernet0/0/1]port trunk allow-pass vlan all

The device is running!
<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r1
[r1]int    
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]quit
[r1]int    
[r1]interface g0/0/0.1
[r1-GigabitEthernet0/0/0.1]ip ad    
[r1-GigabitEthernet0/0/0.1]ip address 12.1.1.1 24
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
Nov 23 2022 15:26:00-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0.1 has entered the UP state. 
[r1-GigabitEthernet0/0/0.1]quit
[r1]int    
[r1]interface g0/0/0.2
[r1-GigabitEthernet0/0/0.2]ip ad    
[r1-GigabitEthernet0/0/0.2]ip address 34.1.1.1 24
[r1-GigabitEthernet0/0/0.2]dot1q termination vid 3
Nov 23 2022 15:26:57-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/0.2 has entered the UP state. 
[r1-GigabitEthernet0/0/0.2]quit
[r1]int    
[r1]interface g0/0/0.3
[r1-GigabitEthernet0/0/0.3]ip ad    
[r1-GigabitEthernet0/0/0.3]ip address 23.1.1.1 24
[r1-GigabitEthernet0/0/0.3]dot1q termination vid 4
[r1-GigabitEthernet0/0/0.3]
Nov 23 2022 15:28:15-08:00 r1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0.3 has entered the UP state. 
[r1-GigabitEthernet0/0/0.3]quit
[r1]dh    
[r1]dhcp en    
[r1]dhcp enable 
Info: The operation may take a few seconds. Please wait for a moment.done.
[r1]ip po    
[r1]ip policy-based-route
[r1]ip pool 1
Info: It's successful to create an IP address pool.
[r1-ip-pool-1]ne    
[r1-ip-pool-1]netbios-type
[r1-ip-pool-1]network 12.1.1.0 24 ma    
[r1-ip-pool-1]network 12.1.1.0 24 mask 24
                               ^
Error:Too many parameters found at '^' position.
[r1-ip-pool-1]net    
[r1-ip-pool-1]netbios-type
[r1-ip-pool-1]network 12.1.1.0 mas    
[r1-ip-pool-1]network 12.1.1.0 mask  24
[r1-ip-pool-1]get    
[r1-ip-pool-1]getw    
[r1-ip-pool-1]gat    
[r1-ip-pool-1]gateway-list  12.1.1.1
[r1-ip-pool-1]dns    
[r1-ip-pool-1]dns-list 8.8.8.8
[r1-ip-pool-1]quit
[r1]ip po