超级会员免费看
这篇博客详细介绍了Realtek RTL8198D的双映像逻辑，包括如何构建、Nor Flash和SPI-NAND Flash的配置、UBI分区设置以及如何在U-Boot环境中切换启动分区。系统会根据uboot环境变量选择启动分区，并提供了在系统启动后切换分区的fw_loaded.sh脚本操作。
Realtek文档介绍
Dual image logistic
＊ System will boot up from bank number store in uboot environment: sw_active.
＊ Firmware will always be written to bank which is not active.
＊ System will try to boot up from the upgrade bank, if boot success, it will be mark to
sw_actvie
＊ For pre-configuration supporting SPI-NAND, dual-image is default enable.
How to build
* Nor Flash
make menuconfig
make all
Note: You need to update uboot which build with dual image config
＊ For SPI-NAND flash, you can choice the following defconfigs
rtl8198f_spi-nand_rtl8367s_dual_image_defconfig,
rtl8198f_spi-nand_rtl83xx_dual_image_defconfig
Flash Layout
＊ Nor Flash
32MB flash, dual image/with dual env:
<
订阅专栏 解锁全文
833
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
