SMS Server Tools配置文件及使用详解

    这几天单位要折腾下子短信猫，于是就折腾了下子SMS Server Toos 3，官网：http://smstools3.kekekasvi.com/ 

参考网址：http://www.ozekisms.com/index.php?ow_page_number=380 这个是可能在发送短信过程中的遇到的错误列表

转载请注明出处。

首先，安装SMS Server Tools 3：

    在官网下载，选择自己需要的版本，我使用的版本是smstools3-3.1.11.tar.gz（一开始使用的版本是最新的，但是和我的短信猫modem不兼容，调了半天换回低版本就好了）

    进入下载到的目录;

tar -xzvf smstools3-3.1.11.tar.gz;
cd smstools3;
sudo make && make install;

出现指示信息：

[root@databak1 smstools3]# make install
cd src && make -
make[1]: Entering directory `/data1/soft/smstools3/src'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/data1/soft/smstools3/src'
./install.sh /usr/local/bin

Installing binary program files
  /usr/local/bin/smsd
Installing some scripts
  /usr/local/bin/sendsms
  /usr/local/bin/sms2html
  /usr/local/bin/sms2unicode
  /usr/local/bin/unicode2sms
Installing config file
  /etc/smsd.conf
Creating minimum spool directories
  Skipped /var/spool, directory already exists
  Creating directory /var/spool/sms
  Creating directory /var/spool/sms/incoming
  Creating directory /var/spool/sms/outgoing
  Creating directory /var/spool/sms/checked
Installing start-script
  /etc/init.d/sms3

Example script files are not installed automatically.
Please dont forget to edit /etc/smsd.conf.

则说明安装成功，现在配置smsd， 即编辑/etc/smsd.conf 文件如下即可

# Example smsd.conf. Read the manual for a description

devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
#sent = /var/spool/sms/sent
receive_before_send = no
keep_filename = no

[GSM1]
#init = AT+CPMS="SM","SM"
#pre_init = no
#init = ATE1;+CPMS="SM","SM"
#device = /dev/ttyUSB1
#device = /dev/usb/ttyUSB0
device = /dev/ttyS0
incoming = no
#pin = 1111
mode = new
rtscts = yes
cs_convert = yes

smsc = 8613800100500

memory_start=1
report = no
send_delay = 0
#baudrate = 115200
baudrate = 9600
#queues = OTHER

使用的时候，启用smsd并可以完成发送短信

/usr/local/bin/smsd；
sendsms 86183****8133(你的手机号，以86开头) ‘test（发送的内容）’

每一次修改配置文件后都要重启smsd

pkill smsd
/usr/local/bin/smsd

即可，希望能帮到你，如果有问题或者需要帮助欢迎邮箱交流：jiangyeziwh@gmail.com