ss7.conf配置项

链路集

1：context

2：language en (cn没声音)

3：variant （CHINA/ITU）

4：combined

5：hunting_policy（odd_lru/even_mru/seq_lth/seq_htl）选线策略 奇数/选偶数(高)/从低选/从高选

The CIC hunting policy (even_mru, odd_lru, seq_lth, seq_htl) is even CIC numbers, most recently used

6：a_cat

7：a_nature

8：b_nature

9：trans_ind

10：need_ani (yes/no)

11：need_ogni (yes/no)

12：use_connect (yes/no) Reply incoming call with CON rather than ACM and ANM

13：enable_st (yes/no) The end-of-pulsing (ST) is not used to determine when incoming address is complete

14：subservice （auto / international / national /）（-1 /0 /8）

; The subservice field: national (8), international (0), auto or decimal/hex value
; The auto means that the subservice is obtained from first received SLTM

15：noa 支持16进制 0x和十进制

16：loadshare (none/linkset/combined) 与 combined的关系

17：t35 （st/timeout）

The value and action for t35. Value is in msec, action is either st or timeout
; If you use overlapped dialling dial plan, you might choose: t35 => 4000,st

18：dni_chunk_limit [0，99]

19：grs (yes/no)  （1/0）

20：blockin

        blockout

21：opc 支持16进制 0x和十进制

22：dpc 支持16进制 0x和十进制

; The host running the mtp3 service
; mtp3server => localhost

链路 

1：a_cat

2：a_nature

3：b_nature

4：trans_ind

5：ptype  （tup/isup）

6：enabled (yes/no)

7:  relaxdtmf(yes/no)

8:  sltm (yes/no)

9:  auto_block(yes/no)

10: firstcic

11:sls

12:channels

13:schannel

; The signalling channel
schannel => 16
; To use the remote mtp3 service, use 'schannel => remote,16'

14:echocancel(no/31speechalways)

; echocancel can be one of: no, 31speech (enable only when transmission medium is 3.1Khz speech), allways

15:echocan_train [10,1000] ; echocan_train specifies training period, between 10 to 100 msec

16:echocan_taps(32/64/128/256)

17:rxgain

18:txgain

19:initial_alignment(yes/no)

20:stp (dpc)

主机：

; chan_ss7 auto-configures by matching the machines host name with the host-<name>
; section in the configuration file, in this case 'gentoo1'. The same
; configuration file can thus be used on several hosts.

1：opc

2：dpc

3：peers

4：enabled

5：default_linkset

6：links =>链路名：span序号

; Syntax: links => link-name:digium-connector-no
; The links on the host is 'l1', connected to span/connector #1

7：if-

; The SCCP global title: translation-type, nature-of-address, numbering-plan, address
globaltitle => 0x00, 0x04, 0x01, 4546931411
ssn => 7
route => 919820405471:ra_geb, 919820367598:ra_geb, 919820706441:ra_geb, :ra_geb

8：ssn

9：globaltitle

10：route

11：

集群 cluster

 

 

 

[linkset-ls1]
enabled => yes
enable_st => no
use_connect => no
hunting_policy => even_mru
context => ss7_call
language => en
subservice => auto
;subservice => national
variant => CHINA
[link-l1]
linkset => ls1
channels => 1-15,17-31
schannel => 16
firstcic => 1
sls => 0
enabled => yes
ptype=tup
b_nature=0
trans_ind=0

;echocancel => allways
echocancel => no
echocan_train => 350
echocan_taps => 128

[link-l2]
linkset => ls1
channels => 1-15,17-31
schannel => 16
firstcic => 33
sls => 1
enabled => yes
ptype=tup
b_nature=0
trans_ind=0

;echocancel => allways
echocancel => no
echocan_train => 350
echocan_taps => 128

[host-tstarfsums]
enabled => yes
opc => 0x0D186D
;dpc => ls1:0x298922,l1:0x123,l2:0x123
dpc => ls1:0x0D1843
links => l1:1,l2:2
;links => l1:1,l2:2
;links => l1:1