单网卡的设置
vim /etc/network/interfaces
修改如下:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
# iface eth0 inet dhcp
auto eth0
iface eth0 inet static
address 192.168.1.108
netmask 255.255.255.0
gateway 192.168.1.1
vim /etc/resolv.conf
末尾加入一行
nameserver 192.168.1.1
重启网络服务并使更改生效
/etc/init.d/networking restart
内外网网卡的设置
interfaces文件
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 210.13.108.55
netmask 255.255.255.240
network 210.13.108.48
broadcast 210.13.108.63
#gateway 210.13.108.49
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 10.9.7.1 210.22.70.3 210.22.84.3
dns-search internal.whyonly.com whyonly.com
auto eth1
iface eth1 inet static
address 10.9.7.68
netmask 255.255.255.0
broadcast 10.9.7.255
gateway 10.9.7.1
up /sbin/ip route add 10.9.0.0/16 via 10.9.7.1 src 10.9.7.68
down /sbin/ip route del 10.9.0.0/16 via 10.9.7.1 src 10.9.7.68
resolv.conf 文件
search internal.whyonly.com whyonly.com
nameserver 10.9.7.1
nameserver 210.22.70.3
nameserver 210.22.84.3