Linux服务器---流量监控MRTG

MRTG

        MRTG可以分析网络流量，但是它必须依赖SNMP协议。将收集到的数据生成HTML文件，以图片的形式展示出来

1、安装一些依赖软件

[root@localhost bandwidthd-2.0.1]# yum install -y net-snmp

 

2、配置snmp，编辑配置文件“/etc/snmp/snmpd.conf”

[root@localhost bandwidthd]# gedit /etc/snmp/snmpd.conf view    systemview    included  .1.3.6.1.2.1.1 view    systemview    included  .1.3.6.1.2.1.25.1.1 view    systemview    included  .1.3.6.1.2.1.2

 

3、启动snmp服务

[root@localhost bandwidthd]# service snmpd start 正在启动snmpd：                                           [确定] [root@localhost bandwidthd]#

 

4、下载bandwidthd软件（https://oss.oetiker.ch/mrtg/pub/?M=D），或者以yum方式在线安装

[root@localhost bandwidthd]# yum install -y mrtg

 

5、修改配置文件”/etc/httpd/conf.d/mrtg.conf”

[root@localhost bandwidthd]# gedit /etc/httpd/conf.d/mrtg.conf  <Location /mrtg>     Order deny,allow #    Deny from all      //这句要注释掉     Allow from all      //这里为all，允许检测所有ip     Allow from ::1     # Allow from .example.com </Location>

 

6、生成mrtg文件，并做一些修改。

[root@localhost bandwidthd]# cfgmaker public@192.168.0.113>/etc/mrtg/mrtg.cfg       //生成文件，注意ip地址需要用户自己设置 [root@localhost bandwidthd]# gedit /etc/mrtg/mrtg.cfg      //修改文件 #  for UNIX  WorkDir: /var/www/mrtg      //当前处于centos系统，因此这句去掉注释.这个路径是apache下的网页路径 #  or for NT # WorkDir: c:\mrtgdata ### Global Defaults #  to get bits instead of bytes and graphs growing to the right    Options[_]: growright, bits    //去掉注释

 

7、生成html文件，执行三次指令

[root@localhost bandwidthd]# env LANG=C mrtg /etc/mrtg/mrtg.cfg   //第一次 2018-08-22 14:50:00, Rateup WARNING: /usr/bin/rateup could not read the primary log file for 192.168.0.113_2 2018-08-22 14:50:00, Rateup WARNING: /usr/bin/rateup The backup log file for 192.168.0.113_2 was invalid as well 2018-08-22 14:50:00, Rateup WARNING: /usr/bin/rateup Can't remove 192.168.0.113_2.old updating log file 2018-08-22 14:50:00, Rateup WARNING: /usr/bin/rateup Can't rename 192.168.0.113_2.log to 192.168.0.113_2.old updating log file [root@localhost bandwidthd]# env LANG=C mrtg /etc/mrtg/mrtg.cfg    //第二次 [root@localhost bandwidthd]# env LANG=C mrtg /etc/mrtg/mrtg.cfg    //第三次

 

8、在浏览器输入“127.0.0.1/mrtg/192.168.0.113_2.html”,这样就可以访问了