Linux基础命令---ifcfg

ifcfg

        ifcfg是一个简单的脚本替换iconfig命令，它可以设置网络接口的ip地址。

        此命令的适用范围：RedHat、RHEL、Ubuntu、CentOS、SUSE、openSUSE、Fedora。

 

1、语法

        ifcfg [device] [cmd]  [address]

        device就是网卡设备，它可能有别名。cmd可以是add、delete、stop。address就是ip地址。

 

2、选项列表

        无

 

3、实例

1）添加ip地址 

[root@localhost ~]# ifcfg eth0 add 192.168.0.250/24                     //添加地址250 Forwarding is ON or its state is unknown (4). OK, No RDISC. [root@localhost ~]#ifconfig                                               //查看网络信息 eth0      Link encap:Ethernet  HWaddr 08:00:27:14:33:57             inet addr:192.168.0.250  Bcast:192.168.0.255 Mask:255.255.255.0           inet6 addr: fe80::a00:27ff:fe14:3357/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500 Metric:1           RX packets:107276 errors:0 dropped:0 overruns:0 frame:0           TX packets:72250 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000            RX bytes:83580745 (79.7 MiB)  TX bytes:5842176 (5.5 MiB)

2）删除ip地址 

[root@localhost ~]# ifcfg eth0 delete 192.168.0.250/24                   //删除网卡地址 Forwarding is ON or its state is unknown (4). OK, No RDISC. [root@localhost ~]# ifconfig                                                 //查看网卡信息，ip地址已经删除 eth0      Link encap:Ethernet  HWaddr 08:00:27:14:33:57             inet6 addr: fe80::a00:27ff:fe14:3357/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500 Metric:1           RX packets:107276 errors:0 dropped:0 overruns:0 frame:0           TX packets:72251 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000            RX bytes:83580745 (79.7 MiB)  TX bytes:5842218 (5.5 MiB)