| abs(计算整型数的绝对值) |
相关函数
| labs, fabs
|
表头文件
| #include<stdlib.h>
|
定义函数
| int abs (int j)
|
函数说明
| abs()用来计算参数j的绝对值,然后将结果返回。
|
返回值
| 返回参数j的绝对值结果。
|
范例
| #ingclude <stdlib.h> main(){ int ansert; answer = abs(-12); printf("|-12| = %d/n", answer); }
|
执行
| |-12| = 12
|
|
| acos(取反余弦函数数值) |
相关函数
| asin , atan , atan2 , cos , sin , tan
|
表头文件
| #include <math.h>
|
定义函数
| double acos (double x);
|
函数说明
| acos()用来计算参数x的反余弦值,然后将结果返回。参数x范围为-1至1之间,超过此范围则会失败。
|
返回值
| 返回0至PI之间的计算结果,单位为弧度,在函数库中角度均以弧度来表示。
|
错误代码
| EDOM参数x超出范围。
|
附加说明
| 使用GCC编译时请加入-lm。
|
范例
| #include <math.h> main (){ double angle; angle = acos(0.5); printf("angle = %f/n", angle); }
|
执行
| angle = 1.047198
|
|
| asin(取反正弦函数值) |
相关函数
| acos , atan , atan2 , cos , sin , tan
|
表头文件
| #include <math.h>
|
定义函数
| double asin (double x)
|
函数说明
| asin()用来计算参数x的反正弦值,然后将结果返回。参数x范围为-1至1之间,超过此范围则会失败。
|
返回值
| 返回-PI/2之PI/2之间的计算结果。
|
错误代码
| EDOM参数x超出范围
|
附加说明
| 使用GCC编译时请加入-lm
|
范例
| #include<math.h> main() { double angle; angle = asin (0.5); printf("angle = %f/n",angle); }
|
执行
| angle = 0.523599
|
|
| atan(取反正切函数值) |
相关函数
| acos,asin,atan2,cos,sin,tan
|
表头文件
| #include<math.h>
|
定义函数
| double atan(double x);
|
函数说明
| atan()用来计算参数x的反正切值,然后将结果返回。
|
返回值
| 返回-PI/2至PI/2之间的计算结果。
|
附加说明
| 使用GCC编译时请加入-lm
|
范例
| #include<math.h> main() { double angle; angle =atan(1); printf("angle = %f/n",angle); }
|
执行
| angle = 1.570796
|
|
| atan2(取得反正切函数值) |
相关函数
| acos,asin,atan,cos,sin,tan
|
表头文件
| #include<math.h>
|
定义函数
| double atan2(double y,double x);
|
函数说明
| atan2()用来计算参数y/x的反正切值,然后将结果返回。
|
返回值
| 返回-PI/2 至PI/2 之间的计算结果。
|
附加说明
| 使用GCC编译时请加入-lm。
|
范例
| #include<math.h> main() { double angle; angle = atan2(1,2); printf("angle = %f/n", angle); }
|
执行
| angle = 0.463648
|
|
| ceil(取不小于参数的最小整型数) |
相关函数
| fabs
|
表头文件
| #include <math.h>
|
定义函数
| double ceil (double x);
|
函数说明
| ceil()会返回不小于参数x的最小整数值,结果以double形态返回。
|
返回值
| 返回不小于参数x的最小整数值。
|
附加说明
| 使用GCC编译时请加入-lm。
|
范例
| #include<math.h> main() { double value[ ]={4.8,1.12,-2.2,0}; int i; for (i=0;value[i]!=0;i++) printf("%f=>%f/n",value[i],ceil(value[i])); }
|
执行
| 4.800000=>5.000000 1.120000=>2.000000 -2.200000=>-2.000000
|
|
| cos(取余玄函数值) |
相关函数
| acos,asin,atan,atan2,sin,tan
|
表头文件
| #include<math.h>
|
定义函数
| double cos(double x);
|
函数说明
| cos()用来计算参数x 的余玄值,然后将结果返回。
|
返回值
| 返回-1至1之间的计算结果。
|
附加说明
| 使用GCC编译时请加入-lm。
|
范例
| #include<math.h> main() { double answer = cos(0.5); printf("cos (0.5) = %f/n",answer); }
|
执行
| cos(0.5) = 0.877583
|
|
| cosh(取双曲线余玄函数值) |
相关函数
| sinh,tanh
|
表头文件
| #include<math.h>
|
定义函数
| double cosh(double x);
|
函数说明
| cosh()用来计算参数x的双曲线余玄值,然后将结果返回。数学定义式为:(exp(x)+exp(-x))/2。
|
返回值
| 返回参数x的双曲线余玄值。
|
附加说明
| 使用GCC编译时请加入-lm。
|
范例
| #include<math.h> main() { double answer = cosh(0.5); printf("cosh(0.5) = %f/n",answer); }
|
执行
| cosh(0.5) = 1.127626
|
|
| exp(计算指数) |
相关函数
| log,log10,pow
|
表头文件
| #include<math.h>
|
定义函数
| double exp(double x);
|
函数说明
| exp()用来计算以e为底的x次方值,即ex值,然后将结果返回。
|
返回值
| 返回e的x次方计算结果。
|
附加说明
| 使用GCC编译时请加入-lm。
|
范例
| #include<math.h> main() { double answer; answer = exp (10); printf("e^10 =%f/n", answer); }
|
执行
| e^10 = 22026.465795
|