[root@db2 pp]# /etc/init.d/PowerPath start
Starting PowerPath: done
[root@db2 pp]# emcpreg -install
=========== EMC PowerPath Registration ===========
Do you have a new registration keyor keys to enter?[n] yes
Enter the registration keys(s) for your product(s),
one per line, pressing Enter aftereachkey.
After typing all keys, press Enter again.
Key (Enter if done): ...............................
1key(s) successfully added.
Key successfully installed.
Key (Enter if done):
1key(s) successfully registered.
[root@db2 pp]#
[root@db2 pp]# powermt display dev=all
[root@db2 pp]# powermt set policy=co
[root@db2 pp]# powermt display dev=all
powermt save
[root@zzkjmydb1 ~]# fdisk -l | grep emc
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/emcpowerc: 1395.9 GB, 1395864371200 bytes
Disk /dev/emcpowerg: 2147 MB, 2147483648 bytes
Disk /dev/emcpowerf: 2147 MB, 2147483648 bytes
Disk /dev/emcpowere: 2147 MB, 2147483648 bytes
Disk /dev/emcpowerd: 6597.1 GB, 6597069766656 bytes
Disk /dev/emcpowera: 1395.9 GB, 1395864371200 bytes
Disk /dev/emcpowerb: 6597.1 GB, 6597069766656 bytes
[root@zzkjmydb1 ~]# powermt display dev=all
Pseudo name=emcpowera
VNX ID=CETV2153000067 [DB]
Logical device ID=600601606B803D00BA61F7488171E511 [FRA2]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP B, current=SP B Array failover mode: 4
==============================================================================--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
============================================================================== 2 lpfc sdac SP B1 active alive 0 0 2 lpfc sdv SP A1 active alive 0 0 1 lpfc sdo SP B2 active alive 0 0 1 lpfc sdh SP A2 active alive 0 0
Pseudo name=emcpowerb
VNX ID=CETV2153000067 [DB]
Logical device ID=600601606B803D00EC0BB4CC8071E511 [DATA2]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP B, current=SP B Array failover mode: 4
==============================================================================--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
============================================================================== 2 lpfc sdaa SP B1 active alive 0 0 2 lpfc sdt SP A1 active alive 0 0 1 lpfc sdm SP B2 active alive 0 0 1 lpfc sdf SP A2 active alive 0 0
Pseudo name=emcpowerc
VNX ID=CETV2153000067 [DB]
Logical device ID=600601606B803D002902443A8171E511 [FRA1]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP B, current=SP B Array failover mode: 4
==============================================================================--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
============================================================================== 2 lpfc sdab SP B1 active alive 0 0 2 lpfc sdu SP A1 active alive 0 0 1 lpfc sdn SP B2 active alive 0 0 1 lpfc sdg SP A2 active alive 0 0
Pseudo name=emcpowerd
VNX ID=CETV2153000067 [DB]
Logical device ID=600601606B803D007750B5E18071E511 [LUN 6]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP A, current=SP A Array failover mode: 4
==============================================================================--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
============================================================================== 2 lpfc sdz SP B1 active alive 0 0 2 lpfc sds SP A1 active alive 0 0 1 lpfc sdl SP B2 active alive 0 0 1 lpfc sde SP A2 active alive 0 0
Pseudo name=emcpowere
VNX ID=CETV2153000067 [DB]
Logical device ID=600601606B803D00372CE3598071E511 [OCR_3]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP A, current=SP A Array failover mode: 4
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
2 lpfc sdy SP B1 active alive 0 0
2 lpfc sdr SP A1 active alive 0 0
1 lpfc sdd SP A2 active alive 0 0
1 lpfc sdk SP B2 active alive 0 0
Pseudo name=emcpowerf
VNX ID=CETV2153000067 [DB]
Logical device ID=600601606B803D00362CE3598071E511 [OCR_2]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP A, current=SP A Array failover mode: 4
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
2 lpfc sdx SP B1 active alive 0 0
2 lpfc sdq SP A1 active alive 0 0
1 lpfc sdj SP B2 active alive 0 0
1 lpfc sdc SP A2 active alive 0 0
Pseudo name=emcpowerg
VNX ID=CETV2153000067 [DB]
Logical device ID=600601606B803D00352CE3598071E511 [OCR_1]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP A, current=SP A Array failover mode: 4
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
2 lpfc sdw SP B1 active alive 0 0
2 lpfc sdp SP A1 active alive 0 0
1 lpfc sdi SP B2 active alive 0 0
1 lpfc sdb SP A2 active alive 0 0