1.安装OEL7.2 64bit版，创建用户bdd
设置无密码sudo
有的时候你的将用户设了nopasswd，但是不起作用，原因是被后面的group的设置覆盖了，需要把group的设置也改为nopasswd。
bdd ALL=(ALL) NOPASSWD: ALL
%wheel 如果bdd不好用，则修改%wheel
设置SSH互信
$ssh-keygen -t rsa
$ssh-keygen -t dsa
$ssh myserver2 cat ~/.ssh/id_rsa.pub >> authorized_keys
$ ssh myserver2 cat ~/.ssh/id_dsa.pub >> authorized_keys
$cat ~/.ssh/id_dsa.pub >> authorized_keys
$ cat ~/.ssh/id_rsa.pub >> authorized_keys
$ scp authorized_keys bdd@myserver2:~/.ssh
chmod 600 authorized_keys
安装Oracle JDK7 hive有的版本需要，不识别8
vi /etc/hosts 设置机器名和ip地址映射
2.各个主机之间建立互信，无密码登陆
3.找一个主机安装mysql
sudo rpm -Uvh http://dev.mysql.com/get/mysql-community-release-el7-5.noarch.rpmsudo yum -y install mysql-community-serversudo /usr/bin/systemctl enable mysqld 启动时自动启动sudo /usr/bin/systemctl start mysqldsudo /usr/bin/mysql_secure_installation mysql启动状态下，设置root密码等，需要mysql启动4.CM5.9安装
tar -xvf xxx 将解压后的内容放入到/opt，/opt/cloudera和/opt/cm-5.9.0
将parcel和parcel.sh放到/opt/cloudera/parcel-repo目录下，安装过程就不用下载了
CDH-5.9.0-1.cdh5.9.0.p0.23-el7.parcel
CDH-5.9.0-1.cdh5.9.0.p0.23-el7.parcel.sha
CDH-5.9.0-1.cdh5.9.0.p0.23-el7.parcel.torrent
5.使用cloudera manager的方式安装
安装配置mysql保存信息
拷贝mysql jdbc jar 到cm-5.9.0/share/cmf/lib/下
$ /opt/cm-5.9.0/share/cmf/schema/scm_prepare_database.sh mysql cm -hlocalhost -uroot -pwonder --scm-host localhost scm scm scm 执行启动脚本 root 权限
创建操作系统用户 sudo useradd --system --home=/opt/cloudera/cm-5.9.0/run/cloudera-scm-server --no-create-home --shell=/bin/false --comment "Cloudera SCM User" cloudera-scm关闭防火墙和SELINUX
$sudo systemctl stop firewalld
$sudo systemctl mask firewalld 禁用防火墙
$sestatus 查看se状态
修改/etc/selinux/config
修改/etc/hosts，确保可以找到机器名，注意要符合安装OS时的机器名，我的是myserver2.localdomain
启动cm server和agent
$sudo ./cloudera-scm-server start
$sudo ./cloudera-scm-agent start
启动后如果报错，可以查看log目录下的日志
等十几秒，打开浏览器，登陆http://ip:7180/cmf admin/admin 第一次启动scm server会比较慢，需要更新schema
按照提示安装，根据parcel的内容选择CDH-5.9.0-1.cdh5.9.0.p0.23，不用安装jdk
使用bdd/wonder用户连接所有服务器
4.2.安装CDH报错
- 主机运行状况不良。 - bdd
ERROR Error, CM server guid updated, expected 26e2c7d5-dd47-4368-811f-a7d1d13e1b9a, received 24171d15-06a4-43f1-b237-cb0e0540017
解决办法：
删除/opt/cm-5.9.1/lib/cloudera-scm-agent/cm_guid
4.3.出现errno111 连接拒绝的错误提示
检查hosts
ip bdd.localdomain bdd
5.创建mysql数据库
hive/oozie/hue
CREATE DATABASE hive DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci;
CREATE DATABASE oozie DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci;
CREATE DATABASE hue DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci;
CREATE DATABASE studio DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci; -- 给bdd studio使用
CREATE DATABASE workflow DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci; -- 给bdd workflow 1.4版本使用
create user 'hive'@'%' identified by 'hive';
create user 'oozie'@'%' identified by 'oozie';
create user 'hue'@'%' identified by 'hue';
create user 'bdd'@'%' identified by 'bdd';
grant all on hive.* to 'hive'@'%';
grant all on oozie.* to 'oozie'@'%';
grant all on hue.* to 'hue'@'%';
grant all on studio.* to 'bdd'@'%';
grant all on workflow.* to 'bdd'@'%';
5.在安装CDH时，download没有问题，在distributed的时候报错，这个时候要注意，选定的集群中的机器名，ssh 过去看是否能免密码登陆。
5.1.ScmActive: Unable to retrieve non-local non-loopback IP address. Seeing address: localhost/127.0.0.1
修改cm5.9.1/etc/cloudera-scm-agent/config。ini， 修改里面的hostname为非localhost
或者检查hosts里面的内容，去掉localhost6的行
6.在创建集群过程中会报错
org.apache.hadoop.hive.metastore.HiveMetaException: Failed to load driver at org.apache.hive.beeline.HiveSchemaHelper.getConnectionToMetastore(HiveSchemaHelper.java:79)
Hive 拷贝：# cp /opt/cm-5.8.3/share/cmf/lib/mysql-connector-Java-5.1.33-bin.jar /opt/cloudera/parcels/CDH-5.8.3-1.cdh5.8.3.p0.3/lib/hive/lib/
[bdd@mypc1 soft]$ sudo cp mysql-connector-java-5.1.39-bin.jar /usr/share/java/mysql-connector-java.jar
[bdd@mypc1 soft]$ sudo chmod 777 /usr/share/java/mysql-connector-java.jar
oozie拷贝：# cp /opt/cm-5.8.3/share/cmf/lib/mysql-connector-java-5.1.33-bin.jar /var/lib/oozie/
Hue不用拷贝如果在安装过程中，出现寻找mysql驱动的情况，注意检查是否是权限的问题 chmod 777 mysql-xxx.jar
====================
如果在安装过程中，下载100%但一直无法分发，检查相应的agent的log cm-5.9.0/log/cloudera-manager中
Traceback (most recent call last):
File "/opt/cm-5.9.0/lib64/cmf/agent/build/env/lib/python2.7/site-packages/cmf-5.9.0-py2.7.egg/cmf/agent.py", line 758, in start
self._init_after_first_heartbeat_response(resp_data)
File "/opt/cm-5.9.0/lib64/cmf/agent/build/env/lib/python2.7/site-packages/cmf-5.9.0-py2.7.egg/cmf/agent.py", line 938, in _init_after_first_heartbeat_response
self.client_configs.load()
File "/opt/cm-5.9.0/lib64/cmf/agent/build/env/lib/python2.7/site-packages/cmf-5.9.0-py2.7.egg/cmf/client_configs.py", line 682, in load
new_deployed.update(self._lookup_alternatives(fname))
File "/opt/cm-5.9.0/lib64/cmf/agent/build/env/lib/python2.7/site-packages/cmf-5.9.0-py2.7.egg/cmf/client_configs.py", line 432, in _lookup_alternatives
return self._parse_alternatives(alt_name, out)
File "/opt/cm-5.9.0/lib64/cmf/agent/build/env/lib/python2.7/site-packages/cmf-5.9.0-py2.7.egg/cmf/client_configs.py", line 444, in _parse_alternatives
path, _, _, priority_str = line.rstrip().split(" ")
ValueError: too many values to unpack
一种解决方法是去掉OpenJDK，使用Oracle JDK
下面是另外一种做法
Re: Mismatched CDH versions: host has NONE but role expect 5
Hello,
I just tested a proposed fix that I think is pretty safe if you need to get by this problem in the agent without uninstalling OpenJDK.
DISCLAIMER:
This code change worked properly in my personal testbed and I think it is sound, but Cloudera engineering will need to confirm or provide an altenate fix. Use at your own risk.
Possible code fix for the agent issue. You can perform these steps on the agent host where the problem occurs:
(1)
Find your "client_configs.py" file. For 5.9.0 it will be:
/opt/cm-5.9.1/lib64/cmf/agent/build/env/lib/python2.7/site-packages/cmf-5.9.1-py2.7.egg/cmf/client_configs.py
/usr/lib64/cmf/agent/build/env/lib/python2.7/site-packages/cmf-5.9.0-py2.7.egg/cmf/client_configs.py
The version number after the "cmf-" in cmf-5.9.0-py2.7.egg will reflect your version number. If you are on 5.8.3 it will look like this:
/usr/lib64/cmf/agent/build/env/lib/python2.7/site-
(2)
Back up your "client_configs.py file (cp client_configs.py client_configs.py.original for example)
(3)
Edit client_configs.py with the following diff as your guide:
diff -u client_configs.py.original_cdh583 client_configs.py
--- client_configs.py.original_cdh583 2017-01-03 08:28:23.922822423 -0800
+++ client_configs.py 2017-01-03 08:26:56.073261511 -0800
@@ -441,7 +441,12 @@
ret = {}
for line in output.splitlines():
if line.startswith("/"):
- path, _, _, priority_str = line.rstrip().split(" ")
+ #path, _, _, priority_str = line.rstrip().split(" ")
+ #proposed fix for Cloudera Internal Jira OPSAPS-38086
+ thisLine = line.rstrip().split(" ")
+ path = thisLine[0]
+ priority_str = thisLine[-1]
Basically, all you are doing is commenting out
path, _, _, priority_str = line.rstrip().split(" ")
and then adding:
thisLine = line.rstrip().split(" ")
path = thisLine[0]
priority_str = thisLine[-1]
WARNING: Make sure the indentiation is exact as python requires it. The end result should look like this (chanages in red):
for line in output.splitlines():
if line.startswith("/"):
#path, _, _, priority_str = line.rstrip().split(" ")
#proposed fix for OPSAPS-38086
thisLine = line.rstrip().split(" ")
path = thisLine[0]
priority_str = thisLine[-1]
# Ignore the alternative if it's not managed by CM.
if CM_MAGIC_PREFIX not in os.path.basename(path):
(4)
Save and restart the agent on the host where you made the code change:
service cloudera-scm-agent restart
Note: The code change merely creates a list of the "split" elements rather than hard-coding the columns. The code only needs the first and last columns, so if we take the first and last elements in the list, the code is happy.
This means the following "update-alternatives --display" output will no longer cause the exception in the agent:
/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.111-2.b15.el
Please test if you have the skills to modify files and let me know your results.
Thanks,
Ben
===============================
另外一个坑 agent 的日志一直显示 Deleting unmanaged parcel, 页面不动了，这时候咋办
删除/opt/cloudera/parcel-cache目录下的内容，删除parcels目录下的内容，包括.flood
重启agent，再试
安装BDD建议使用非HTTPS，因为要嵌入其他服务和mapviewer服务时，本地的地图https会出现跨域安全的问题。
[bdd@myserver2 bdd140]$ mv V837111-01.zip bdd2.zip
bdd1.zip bdd2.zip fmw_12.1.3.0.0_wls.jar installer
###############################################################################
############################# Required Settings ###############################
# These settings are required. #
# Review and update them according to your environment, as the defaults may #
# not be appropriate. #
###############################################################################
############################# Must Set ########################################
## Root folder path of the installed product components on all servers
## E.g. /localdisk/Oracle/Middleware
ORACLE_HOME=/opt/bdd140
## Oracle inventory pointer file
## If any Oracle software is already installed, this file should exist on the di
sk.
## Please change the default value to the existing file.
## Otherwise provide a path where the file will be created.
## Cannot be placed under ORACLE_HOME
## E.g. /localdisk/Oracle/oraInst.loc
ORACLE_INV_PTR=/home/bdd/Oracle/oraInst.log
## Path to the software packages downloaded from Oracle Software Delivery Cloud
## If not set, installer will prompt for it at runtime
## This value can be overwritten by an environment variable
## E.g. /localdisk/packages
INSTALLER_PATH=/opt/soft/bdd140/packages
## Path of shared Dgraph index files
## Do not set the index folder under ORACLE_HOME, otherwise it will be deleted d
uring uninstall.
## E.g. /share/bdd_dgraph_index
DGRAPH_INDEX_DIR=/opt/share/bdd_dgraph_index
## Cloudera Manager/Ambari Web UI host server
## Value: host.domain
HADOOP_UI_HOST=myserver2:7180
## JDBC URL for the Studio database
STUDIO_JDBC_URL=jdbc:mysql://myserver2:3306/studio?useUnicode=true&characterEnco
ding=UTF-8&useFastDataParsing=false
## Template for MySQL 5.5.3 or later - driver will be com.mysql.jdbc.Driver
#STUDIO_JDBC_URL=jdbc:mysql://localhost:3306/studio?useUnicode=true&characterEnc
oding=UTF-8&useFastDateParsing=false
## Template for Oracle DB 11g or 12c - driver will be oracle.jdbc.OracleDriver
#STUDIO_JDBC_URL=jdbc:oracle:thin:@localhost:1521:orcl
## Template for Hypersonic - not supported in production environments, driver wi
ll be org.hsqldb.jdbcDriver
#STUDIO_JDBC_URL=jdbc:hsqldb:${ORACLE_HOME}/user_projects/domains/${WEBLOGIC_DOM
AIN_NAME}/config/studio/data/hsql/lportal
## JDBC URL for the Workflow Manager database
WORKFLOW_MANAGER_JDBC_URL=
## Template for MySQL 5.5.3 or later - driver will be com.mysql.jdbc.Driver
#WORKFLOW_MANAGER_JDBC_URL=jdbc:mysql://localhost:3306/workflow?useUnicode=true&
characterEncoding=UTF-8&useFastDateParsing=false
## Template for Oracle DB 11g or 12c - driver will be oracle.jdbc.OracleDriver
#WORKFLOW_MANAGER_JDBC_URL=jdbc:oracle:thin:@localhost:1521:orcl
############################# General #########################################
## See value of ORACLE_HOME, ORACLE_INV_PTR, INSTALLER_PATH in ### Must Set ###
## Values: BDA, OPC, CDH, HW, MAPR
## BDA = Oracle Big Data Appliance
## CDH = general purpose hardware with CDH
## HW = general purpose hardware with Hortonworks
## OPC = Oracle Public Cloud
## MAPR = general purpose hardware with MapR
INSTALL_TYPE=CDH
## Path to JDK on all servers
## Requires 1.7.0_67 and above
JAVA_HOME=/usr/java/jdk1.8.0_111
## Temp folder used during the installation on each server
## Requries 10GB free space on Weblogic and Dgraph servers and 3GB for the rest
TEMP_FOLDER_PATH=/tmp
############################# CDH/HW ##########################################
## See value of HADOOP_UI_HOST in ### Must Set ###
## Cloudera Manager/Ambari/MapR Control System Web UI port
## For Cloudera Manager, default value is 7180
## For Ambari, default value is 8080
## For MapR Control System, default value is 8443
HADOOP_UI_PORT=7180
## Cloudera/Hortonworks/MapR cluster name, can be found on the Cloudera Manager/
Ambari/MapR Control System Web UI.
## Space char need to be URL encoded to %20
HADOOP_UI_CLUSTER_NAME=Cluster%201
## Hue server and port in a Hortonworks cluster
## If not set, Hue feature in Studio will be disabled.
## This is only required when INSTALL_TYPE is HW because Ambari does not manage
Hue.
## Values: http://server:port/ or https://server:port/
HUE_URI=http://myserver2:8888/
## A list of folder paths to the Hadoop client lib files.
## These must be on the ADMIN SERVER before installation
## Values: folder1[,folderN]
## See the BDD documentation for more details
## If left empty when installing on CDH, installer will try downloads the necess
ary packages from Cloudera website and set this value automatically
HADOOP_CLIENT_LIB_PATHS=/opt/soft/client_packages
## Template for CDH 5.7.1 and above
## Download the Spark, Hive, Avro and Hadoop tgz packages from Cloudera Website
and unpack to ADMIN SERVER and replace <UNZIPPED_XXX_BASE> with the absolute pat
h to the component's client library.
#HADOOP_CLIENT_LIB_PATHS=<UNZIPPED_SPARK_BASE>,<UNZIPPED_SPARK_BASE>/lib,<UNZIPPED_HIVE_BASE>/lib,<UNZIPPED_HADOOP_BASE>/share/hadoop/common,<UNZIPPED_HADOOP_BA
SE>/share/hadoop/common/lib,<UNZIPPED_HADOOP_BASE>/share/hadoop/hdfs,<UNZIPPED_H
ADOOP_BASE>/share/hadoop/yarn,<UNZIPPED_HADOOP_BASE>/share/hadoop/mapreduce2,<UN
ZIPPED_AVRO_BASE>/dist/java
## Template for HDP 2.4.2 and above
## Copy the folders shown in the template from the HDP servers to the ADMIN SERV
ER. Update the paths to point to the location you copied the libraries to.
#HADOOP_CLIENT_LIB_PATHS=/usr/hdp/2.4.2.0-212/hive/lib,/usr/hdp/2.4.2.0-212/spar
k/lib,/usr/hdp/2.4.2.0-212/hadoop,/usr/hdp/2.4.2.0-212/hadoop/lib,/usr/hdp/2.4.2
.0-212/hadoop-hdfs,/usr/hdp/2.4.2.0-212/hadoop-hdfs/lib,/usr/hdp/2.4.2.0-212/had
oop-yarn,/usr/hdp/2.4.2.0-212/hadoop-yarn/lib,/usr/hdp/2.4.2.0-212/hadoop-mapred
uce,/usr/hdp/2.4.2.0-212/hadoop-mapreduce/lib
## Template for MapR 5.1
## Copy the folders shown in the template from the MapR servers to the ADMIN SER
VER. Update the paths to point to the location you copied the libraries to.
## In /opt/mapr/lib, only copy the maprfs-5.1.0-mapr.jar file
#HADOOP_CLIENT_LIB_PATHS=/opt/mapr/spark/spark-1.6.1/lib,/opt/mapr/hive/hive-1.2
/lib,/opt/mapr/zookeeper/zookeeper-3.4.5,/opt/mapr/zookeeper/zookeeper-3.4.5/lib
,/opt/mapr/hadoop/hadoop-2.7.0/share/hadoop/common,/opt/mapr/hadoop/hadoop-2.7.0
/share/hadoop/common/lib,/opt/mapr/hadoop/hadoop-2.7.0/share/hadoop/hdfs,/opt/ma
pr/hadoop/hadoop-2.7.0/share/hadoop/hdfs/lib,/opt/mapr/hadoop/hadoop-2.7.0/share/hadoop/mapreduce,/opt/mapr/hadoop/hadoop-2.7.0/share/hadoop/mapreduce/lib,/opt/
mapr/hadoop/hadoop-2.7.0/share/hadoop/tools/lib,/opt/mapr/hadoop/hadoop-2.7.0/sh
are/hadoop/yarn,/opt/mapr/hadoop/hadoop-2.7.0/share/hadoop/yarn/lib
## TLS/SSL certificates folder path on ADMIN_SERVER
## If TLS/SSL is enabled for either HDFS,YARN,HIVE or KMS, export all the certif
icates from the Keystore of corresponding Hadoop service hosts.
HADOOP_CERTIFICATES_PATH=
############################# Kerberos ########################################
## Enable Kerberos in BDD cluster
## When set to TRUE, KERBEROS_PRINCIPAL, KERBEROS_KEYTAB_PATH and KRB5_CONF_PATH
must also be set
## Value: TRUE, FALSE
ENABLE_KERBEROS=FALSE
## Kerberos principal
KERBEROS_PRINCIPAL=
## Path to Kerberos keytab file on ADMIN SERVER
KERBEROS_KEYTAB_PATH=
## Path to Kerberos config file
## Default value is /etc/krb5.conf
KRB5_CONF_PATH=/etc/krb5.conf
############################# Weblogic (BDD Server) ###########################
## See value of STUDIO_JDBC_URL in ### Must Set ###
## Weblogic Admin server
## Provide the hostname that will be installed as Weblogic Admin server
## If left empty, it will default to the hostname of localhost
## Value: host.domain
ADMIN_SERVER=myserver2
## Weblogic Managed servers
## This list must also contain the Admin server
## Value: hostname1.domain[,hostnameN.domain]
MANAGED_SERVERS=${ADMIN_SERVER}
############################# Dgraph and HDFS Agent ###########################
## See value of DGRAPH_INDEX_DIR in ### Must Set ###
## List of the Dgraph and HDFS Agent servers
## Value: hostname1.domain[,hostnameN.domain]
DGRAPH_SERVERS=${ADMIN_SERVER}
## The number of threads for the Dgraph. The following are recommended:
## If the machine will run only the Dgraph, the number of threads = number of CP
U cores
## If the machine will run the Dgraph + other BDD components, the number of thre
ads = number of CPU cores - 2
## If the machine will run the Dgraph + CDH/HW services, the number of threads =
number of CPU cores - cores needed by CDH/HW
## Please make sure the number specified is in compliance with the license agree
ment
## It is not recommended to run the Dgraph on machines running Spark
## If left empty, it will default to number of CPU cores - 2
DGRAPH_THREADS=
## The amount of cache for the Dgraph, in MB.
## For enhanced performance, this should be 50% of available memory
## If left empty, it will default to 50% of available memory
DGRAPH_CACHE=
## Dgraph cluster name in Zookeeper
ZOOKEEPER_INDEX=cluster1
############################# Data Processing #################################
## HDFS sub-directory under /user used by Data Processing
## This will contain Data Processing jar files and a sandbox used during file up
loading
## Installer will create this directory if it doesn't exist
HDFS_DP_USER_DIR=bdd
## The YARN queue the EDP job is submitted to
YARN_QUEUE=default
## Name of Hive database used by Data Processing
HIVE_DATABASE_NAME=default
## The path to the spark_on_yarn jar
SPARK_ON_YARN_JAR=/opt/cloudera/parcels/CDH/lib/spark/lib/spark-assembly.jar
## Template for CDH 5.5
#SPARK_ON_YARN_JAR=/opt/cloudera/parcels/CDH/lib/spark/lib/spark-assembly.jar
## Template for HDP 2.3.4
#SPARK_ON_YARN_JAR=/usr/hdp/2.3.4.17-1/hive/lib/hive-metastore.jar:/usr/hdp/2.3.
4.17-1/hive/lib/hive-exec.jar:/usr/hdp/2.3.4.17-1/spark/lib/spark-assembly-1.5.2
.2.3.4.17-1-hadoop2.7.1.2.3.4.17-1.jar
## Template for MapR 5.1
#SPARK_ON_YARN_JAR=/opt/mapr/spark/spark-1.6.1/lib/spark-assembly-1.6.1-mapr-160
5-hadoop2.7.0-mapr-1602.jar
############################# Micro Service ###################################
## List of the Transform service servers
## Value: hostname1.domain[,hostnameN.domain]
TRANSFORM_SERVICE_SERVERS=${ADMIN_SERVER}
## TRANSFORM service port
## Default value is 7203
TRANSFORM_SERVICE_PORT=7203
## Enable Clustering Service at install time
## Value: TRUE, FALSE
ENABLE_CLUSTERING_SERVICE=FALSE
## List of the Clustering service servers
## Value: hostname1.domain[,hostnameN.domain]
CLUSTERING_SERVICE_SERVERS=${ADMIN_SERVER}
## Clustering service port
## Default value is 7204
CLUSTERING_SERVICE_PORT=7204
## List of the Workflow Manager servers
## Value: hostname1.domain[,hostnameN.domain]
WORKFLOW_MANAGER_SERVERS=${ADMIN_SERVER}
## Workflow Manager port
## Default value is 7207
WORKFLOW_MANAGER_PORT=7207
###############################################################################
############################# Optional Settings ###############################
# These settings are optional. #
# The default values should work in most cases. Review and update them as #
# necessary. #
###############################################################################
############################# General #########################################
## If set to TRUE, installer will remove any previous installations under ORACLE
_HOME
## If set to FALSE, installer will quit if ORACLE_HOME exists
## Value: FALSE, TRUE
FORCE=FALSE
## Enable the BDD cluster to autostart after reboot
## This will automatically restart WebLogic (which includes the Dgraph Gateway a
nd Studio), the Dgraph, and the HDFS Agent
## Value: TRUE, FALSE
ENABLE_AUTOSTART=TRUE
## Temp folder path on Admin server used during backup and restore
BACKUP_LOCAL_TEMP_FOLDER_PATH=${TEMP_FOLDER_PATH}
## Temp folder path on HDFS server used during backup and restore
BACKUP_HDFS_TEMP_FOLDER_PATH=${TEMP_FOLDER_PATH}
############################# WebLogic (BDD Server) ###########################
## Start WebLogic in prod mode or dev mode
## Prod mode requires username and password when starting
## Value: prod, dev
WLS_START_MODE=prod
## Set to TRUE if WebLogic will be installed on servers with no swap space confi
gured
## This will disable system prerequisite checks during WebLogic installation
## Value: TRUE, FALSE
WLS_NO_SWAP=FALSE
## Name of the WebLogic domain
WEBLOGIC_DOMAIN_NAME=bdd-${BDD_VERSION}_domain
## WebLogic ports
## Default values are 7001 for Admin Server and 7003 for Managed Server
ADMIN_SERVER_PORT=7001
MANAGED_SERVER_PORT=7003
## Enable SSL for Studio and Admin Server
## Value: TRUE, FALSE
WLS_SECURE_MODE=TRUE
## WebLogic secure ports
## Default values are 7002 for Admin server and 7004 for Managed server
ADMIN_SERVER_SECURE_PORT=7002
MANAGED_SERVER_SECURE_PORT=7004
## Dgraph Gateway (formerly called Endeca Server) log level
## Values: INCIDENT_ERROR, ERROR, WARNING, NOTIFICATION, TRACE.
ENDECA_SERVER_LOG_LEVEL=ERROR
## The timeout value (in milliseconds) used when responding to requests sent to
all Dgraph Gateway web services except the Data Ingest Web Service.
## A value of 0 means there is no timeout. The default value is 300000.
SERVER_TIMEOUT=300000
## The timeout value (in milliseconds) used when responding to requests sent to
the Data Ingest Web Service.
## A value of 0 means there is no timeout. The default value is 1680000.
SERVER_INGEST_TIMEOUT=1680000
## The timeout value (in milliseconds) used when checking data source availabili
ty when connections are initialized.
## A value of 0 means there is no timeout. The default value is 10000.
SERVER_HEALTHCHECK_TIMEOUT=10000
## Enable DB cache in Studio
## Value: TRUE FALSE
STUDIO_JDBC_CACHE=TRUE
## Studio administrator user's screen name
## Accepts ascii characters (a-z, A-Z), digits 0-9, period, hyphen.
STUDIO_ADMIN_SCREEN_NAME=admin
## Studio administrator user's email address
STUDIO_ADMIN_EMAIL_ADDRESS=admin@oracle.com
## Determines whether the Studio administrator must reset their initial password
## Value: TRUE FALSE
STUDIO_ADMIN_PASSWORD_RESET_REQUIRED=FALSE
## Studio administrator user's first name
STUDIO_ADMIN_FIRST_NAME=Admin
## Studio administrator user's middle name
STUDIO_ADMIN_MIDDLE_NAME=
## Studio administrator user's last name
STUDIO_ADMIN_LAST_NAME=Admin
############################# Dgraph and HDFS Agent ###########################
## Dgraph web service port
## Default value is 7010
DGRAPH_WS_PORT=7010
## Dgraph bulk load port
## Default value is 7019
DGRAPH_BULKLOAD_PORT=7019
## Dgraph stdout/stderr file
DGRAPH_OUT_FILE=${ORACLE_HOME}/BDD-${BDD_VERSION}/logs/dgraph.out
## Dgraph log level
## Defined in format: topic1 level1|topic2 level2|..|topicN levelN
DGRAPH_LOG_LEVEL=
## Additional start up parameters
## Should not include any of the above Dgraph settings
DGRAPH_ADDITIONAL_ARG=
## Whether --mount_hdfs should be specified when start Dgraph
## Value: TRUE|FALSE
DGRAPH_USE_MOUNT_HDFS=FALSE
## Where to mount the HDFS root directory on local file system
## Effective when DGRAPH_USE_MOUNT_HDFS is TRUE
## If changed after setup, user need to ensure the folder exists and is empty
DGRAPH_HDFS_MOUNT_DIR=${ORACLE_HOME}/BDD-${BDD_VERSION}/dgraph/hdfs_root
## Enable distributed EVE mode
## Value: TRUE|FALSE
DGRAPH_ENABLE_MPP=FALSE
## Dgraph MPP port
## Default value is 7029
DGRAPH_MPP_PORT=7029
## The interval in minutes that Dgraph refreshes Kerberos ticket
## Effective only when Kerberos is enabled
## Default value is 60
KERBEROS_TICKET_REFRESH_INTERVAL=60
## The Kerberos ticket lifetime used by Dgraph
## Value should be in a format recognized by the Kerberos libraries for specifyi
ng times,
## such as 10h(ten hours) or 10m(ten minutes). Known units are s,m,h, and d.
## Default value is 10h
KERBEROS_TICKET_LIFETIME=10h
# Enable Cgroup
## When set to TRUE, DGRAPH_CGROUP_NAME must also be set
## Value: TRUE, FALSE
DGRAPH_ENABLE_CGROUP=FALSE
## The name of the CGroup that controls the Dgraph process
## Default value is dgraph
DGRAPH_CGROUP_NAME=dgraph
## HDFS Agent port
## Default value is 7102
AGENT_PORT=7102
## HDFS Agent export port
## Default value is 7101
AGENT_EXPORT_PORT=7101
## HDFS Agent output file
AGENT_OUT_FILE=${ORACLE_HOME}/BDD-${BDD_VERSION}/logs/dgraphHDFSAgent.out
############################# Data Processing #################################
## Enable/disable the Hive Table Detector
## The Detector monitors the Hive table changes and auto-updates data sets in th
e Dgraph through a cron job
## Values: TRUE, FALSE
ENABLE_HIVE_TABLE_DETECTOR=FALSE
## Hive Table Detector server
## This should be one of the WebLogic Managed servers
DETECTOR_SERVER=${ADMIN_SERVER}
## Specifies the Hive database the Detector will monitor
DETECTOR_HIVE_DATABASE=default
## Maximum amount of time (in seconds) the Detector waits before submitting upda
te jobs
## Default value: 1800
DETECTOR_MAXIMUM_WAIT_TIME=1800
## Cron format schedule to run the detector
DETECTOR_SCHEDULE=0 0 * * *
## Enable Data Processing enrichments
ENABLE_ENRICHMENTS=true
## The maximum number of records included in a data set
MAX_RECORDS=1000000
## The HDFS directory that stores Avro files created when users export data
SANDBOX_PATH=/user/${HDFS_DP_USER_DIR}
## ISO-639 code used to set the language of all attributes in a data set
## Can also be set to "unknown"
LANGUAGE=unknown
## A colon-separated list of paths of jars on each cluster node
## Usually this path will simply be empty
## This will be used by end users to add custom serde's onto the classpath
## User need to copy the jars to each cluster node
DP_ADDITIONAL_JARS=
###############################################################################
############################# Internal Settings ###############################
# These settings are intended for use by Oracle Support only. #
# Do not edit them unless instructed to do so by Oracle Support. #
###############################################################################
## The maximum number of calls Studio can make to DP
DP_POOL_SIZE=50
## The maximum number of jobs Studio can add to the DP queue
DP_TASK_QUEUE_SIZE=1000
# Maximum partition size for Spark inputs, in MB
MAX_INPUT_SPLIT_SIZE=32
## Indicates whether Data Processing will dynamically compute the executor resou
rces or use static executor resource configuration.
## When set to true, resource parameters(SPARK_DRIVER_CORES, SPARK_DRIVER_MEMORY
, SPARK_EXECUTORS, SPARK_EXECUTOR_CORES and SPARK_EXECUTOR_MEMORY) are not requi
red and will be ignored even if specified.
## When set to false, set values for SPARK_DRIVER_CORES, SPARK_DRIVER_MEMORY, SP
ARK_EXECUTORS, SPARK_EXECUTOR_CORES and SPARK_EXECUTOR_MEMORY.
## Values: true, false
SPARK_DYNAMIC_ALLOCATION=true
## The number of cores used by the EDP Spark job driver
SPARK_DRIVER_CORES=2
## The maximum memory heap size for EDP Spark job driver, in the same format as
JVM memory strings (e.g. 512m, 2g)
SPARK_DRIVER_MEMORY=4g
## The total number of Spark executors to launch
SPARK_EXECUTORS=2
## The number of cores for each Spark executor
SPARK_EXECUTOR_CORES=1
## The maximum memory heap size for each Spark executor, in the same format as J
VM memory strings (e.g. 512m, 2g)
SPARK_EXECUTOR_MEMORY=4g
## The threshold length of a Dgraph attribute to enable record-search
RECORD_SEARCH_THRESHOLD=200
## The threshold length of a Dgraph attribute to enable value-search
VALUE_SEARCH_THRESHOLD=200
## BDD Version
BDD_VERSION=1.4.0.37.1301
## BDD hotfix/patch Version
BDD_RELEASE_VERSION=1.4.0.0
avro-1.7.6-cdh5.8.3.tar.gz hive-1.1.0-cdh5.8.3.tar.gz
bddHadoopFatJar.jar spark-1.6.0-cdh5.8.3.tar.gz
hadoop-2.6.0-cdh5.8.3.tar.gz
- 文档中需要安装perl的The Mail::Address and XML::Parser Perl modules
yum install perl-extutil 如果这个没有，就装yum install perl-devel 吧，里面包含
yum install nss-devel 要大于等于3.16.1，RHEL6自带的版本太低
如果是rhel6的环境还要装nc, sudo yum install nc，否则检查zookeeper时会报command not found
2.perl Makefile.PL
3.make
4.sudo make install
如果perl Makefile.PL时报错没有C编译器，那就别懒了，赶紧装一个吧 sudo yum install gcc gcc-c++
================
RHEL6安装BDD时报错 -tlsv1.2 not supported by curl. Please upgrade curl and try again.
使用city-fan的repo http://www.city-fan.org/ftp/contrib/yum-repo/city-fan.org-release-1-13.rhel6.noarch.rpm, yum update
================
9.执行setup.sh，总是发现在Query CDH配置的时候报错，修改一下安装脚本installer/linux/getCDHConfig.sh，将下面的变量赋值
export CM_PASSWORD=admin
export CM_HOST=myserver2
export CM_PORT=7180
export CM_CLUSTER_NAME=Cluster%201
====================================================
CDH5.9.0 安装运行时报错
Can't open /opt/cm-5.9.0/run/cloudera-scm-agent/process/ccdeploy_hadoop-conf_etchadoopconf.cloudera.hdfs_2617210448726206040/hadoop-conf/hive-env.sh: No such file or directory.重装解决，回到初始环境
====================================================
-
启动cloudera-scm_server后系统报错，java网络连接不上，现象是cm的web页面一直处于失效状态。检查ulimit-n 设置为65535
-
有时候默认的系统最大文件打开数量不够大，需要设置下，如果希望永久生效，就修改/etc/security/limits.conf，然后加入以下内容，退出再重新登陆即可
* hard nofile 65535
* soft nofile 65535需要生效的app需要重启。
另外在/etc/rc.sysinit里加入ulimit -n 65535也可以，需要重启系统
还可以在/etc/sysconfig/init里写入HARD_LIMIT_NOFILE=65535，我猜也要重启
使用OEL7，这些参数默认配置好，检测能通过
===================================================
RHEL6修改yum repo，使用Oracle Linux的源，安装6下的包。
[base]
name=base
baseurl=http://yum.oracle.com/repo/OracleLinux/OL6/latest/x86_64/
failovermethod=priority
enabled=1
gpgcheck=0
[epel]
name=Extra Packages for Enterprise Linux 7 - $basearch
#baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch
mirrorlist=https://linuxmirrors.ir/pub/epel/6/x86_64/
enabled=1
gpgcheck=0
==================================================
安装cloudera 时报错
Error, CM server guid updated, expected 25cf17b3-391a-4368-848a-07118d6f11fb, received b3d4a47a-1476-4ea4-b236-24426b1b8540
删除/opt/cm-5.9.1/lib/cloudera-scm_agent/cm_guid
重新生成guid
1159
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
