######################## Filebeat Configuration ############################
# This file is a full configuration example documenting all non-deprecated
# options in comments. For a shorter configuration example, that contains only
# the most common options, please see filebeat.yml in the same directory.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html
#========================== Modules configuration =============================
filebeat.modules:
#-------------------------------- System Module --------------------------------
#- module: system
# Syslog
#syslog:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
# Authorization logs
#auth:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#-------------------------------- Apache Module --------------------------------
#- module: apache
# Access logs
#access:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
# Error logs
#error:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#-------------------------------- Auditd Module --------------------------------
#- module: auditd
#log:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#---------------------------- Elasticsearch Module ----------------------------
- module: elasticsearch
# Server log
server:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
gc:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
audit:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
slowlog:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
deprecation:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
#------------------------------- HAProxy Module -------------------------------
- module: haproxy
# All logs
log:
enabled: true
# Set which input to use between syslog (default) or file.
#var.input:
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
#-------------------------------- Icinga Module --------------------------------
#- module: icinga
# Main logs
#main:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
# Debug logs
#debug:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
# Startup logs
#startup:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#--------------------------------- IIS Module ---------------------------------
#- module: iis
# Access logs
#access:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
# Error logs
#error:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#-------------------------------- Kafka Module --------------------------------
- module: kafka
# All logs
log:
enabled: true
# Set custom paths for Kafka. If left empty,
# Filebeat will look under /opt.
#var.kafka_home:
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
#-------------------------------- Kibana Module --------------------------------
- module: kibana
# All logs
log:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
#------------------------------- Logstash Module -------------------------------
#- module: logstash
# logs
#log:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
# var.paths:
# Slow logs
#slowlog:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
#------------------------------- Mongodb Module -------------------------------
#- module: mongodb
# Logs
#log:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#-------------------------------- MySQL Module --------------------------------
#- module: mysql
# Error logs
#error:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
# Slow logs
#slowlog:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#--------------------------------- NATS Module ---------------------------------
- module: nats
# All logs
log:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
#-------------------------------- Nginx Module --------------------------------
#- module: nginx
# Access logs
#access:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
# Error logs
#error:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
# Ingress-nginx controller logs. This is disabled by default. It could be used in Kubernetes environments to parse ingress-nginx logs
#ingress_controller:
# enabled: false
#
# # Set custom paths for the log files. If left empty,
# # Filebeat will choose the paths depending on your OS.
# #var.paths:
#------------------------------- Osquery Module -------------------------------
- module: osquery
result:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# If true, all fields created by this module are prefixed with
# `osquery.result`. Set to false to copy the fields in the root
# of the document. The default is true.
#var.use_namespace: true
#------------------------------ PostgreSQL Module ------------------------------
#- module: postgresql
# Logs
#log:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#-------------------------------- Redis Module --------------------------------
#- module: redis
# Main logs
#log:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths: ["/var/log/redis/redis-server.log*"]
# Slow logs, retrieved via the Redis API (SLOWLOG)
#slowlog:
#enabled: true
# The Redis hosts to connect to.
#var.hosts: ["localhost:6379"]
# Optional, the password to use when connecting to Redis.
#var.password:
#----------------------------- Google Santa Module -----------------------------
- module: santa
log:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the the default path.
#var.paths:
#------------------------------- Traefik Module -------------------------------
#- module: traefik
# Access logs
#access:
#enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
# Input configuration (advanced). Any input configuration option
# can be added under this section.
#input:
#=========================== Filebeat inputs =============================
# List of inputs to fetch data.
filebeat.inputs:
# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input specific configurations.
# Type of the files. Based on this the way the file is read is decided.
# The different types cannot be mixed in one input
#
# Possible options are:
# * log: Reads every line of the log file (default)
# * stdin: Reads the standard in
#------------------------------ Log input --------------------------------
- type: log
# Change to true to enable this input configuration.
enabled: false
# Paths that should be crawled and fetched. Glob based paths.
# To fetch all ".log" files from a specific level of subdirectories
# /var/log/*/*.log can be used.
# For each file found under this path, a harvester is started.
# Make sure not file is defined twice as this can lead to unexpected behaviour.
paths:
- /var/log/*.log
#- c:\programdata\elasticsearch\logs\*
# Configure the file encoding for reading files with international characters
# following the W3C recommendation for HTML5 (http://www.w3.org/TR/encoding).
# Some sample encodings:
# plain, utf-8, utf-16be-bom, utf-16be, utf-16le, big5, gb18030, gbk,
# hz-gb-2312, euc-kr, euc-jp, iso-2022-jp, shift-jis, ...
#encoding: plain
# Exclude lines. A list of regular expressions to match. It drops the lines that are
# matching any regular expression from the list. The include_lines is called before
# exclude_lines. By default, no lines are dropped.
#exclude_lines: ['^DBG']
# Include lines. A list of regular expressions to match. It exports the lines that are
# matching any regular expression from the list. The include_lines is called before
# exclude_lines. By default, all the lines are exported.
#include_lines: ['^ERR', '^WARN']
# Exclude files. A list of regular expressions to match. Filebeat drops the files that
# are matching any regular expression from the list. By default, no files are dropped.
#exclude_files: ['.gz$']
# Method to determine if two files are the same or not. By default
# the Beat considers two files the same if their inode and device id are the same.
#file_identity.native: ~
# Optional additional fields. These fields can be freely picked
# to add additional information to the crawled log files for filtering
#fields:
# level: debug
# review: 1
# Set to true to store the additional fields as top level fields instead
# of under the "fields" sub-dictionary. In case of name conflicts with the
# fields added by Filebeat itself, the custom fields overwrite the default
# fields.
#fields_under_root: false
# Set to true to publish fields with null values in events.
#keep_null: false
# By default, all events contain `host.name`. This option can be set to true
# to disable the addition of this field to all events. The default value is
# false.
#publisher_pipeline.disable_host: false
# Ignore files which were modified more then the defined timespan in the past.
# ignore_older is disabled by default, so no files are ignored by setting it to 0.
# Time strings like 2h (2 hours), 5m (5 minutes) can be used.
#ignore_older: 0
# How often the input checks for new files in the paths that are specified
# for harvesting. Specify 1s to scan the directory as frequently as possible
# without causing Filebeat to scan too frequently. Default: 10s.
#scan_frequency: 10s
# Defines the buffer size every harvester uses when fetching the file
#harvester_buffer_size: 16384
# Maximum number of bytes a single log event can have
# All bytes after max_bytes are discarded and not sent. The default is 10MB.
# This is especially useful for multiline log messages which can get large.
#max_bytes: 10485760
# Characters which separate the lines. Valid values: auto, line_feed, vertical_tab, form_feed,
# carriage_return, carriage_return_line_feed, next_line, line_separator, paragraph_separator.
#line_terminator: auto
### Recursive glob configuration
# Expand "**" patterns into regular glob patterns.
#recursive_glob.enabled: true
### JSON configuration
# Decode JSON options. Enable this if your logs are structured in JSON.
# JSON key on which to apply the line filtering and multiline settings. This key
# must be top level and its value must be string, otherwise it is ignored. If
# no text key is defined, the line filtering and multiline features cannot be used.
#json.message_key:
# By default, the decoded JSON is placed under a "json" key in the output document.
# If you enable this setting, the keys are copied top level in the output document.
#json.keys_under_root: false
# If keys_under_root and this setting are enabled, then the values from the decoded
# JSON object overwrite the fields that Filebeat normally adds (type, source, offset, etc.)
# in case of conflicts.
#json.overwrite_keys: false
# If this setting is enabled, Filebeat adds a "error.message" and "error.key: json" key in case of JSON
# unmarshaling errors or when a text key is defined in the configuration but cannot
# be used.
#json.add_error_key: false
### Multiline options
# Multiline can be used for log messages spanning multiple lines. This is common
# for Java Stack Traces or C-Line Continuation
# The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
#multiline.pattern: ^\[
# Defines if the pattern set under pattern should be negated or not. Default is false.
#multiline.negate: false
# Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
# that was (not) matched before or after or as long as a pattern is not matched based on negate.
# Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
#multiline.match: after
# The maximum number of lines that are combined to one event.
# In case there are more the max_lines the additional lines are discarded.
# Default is 500
#multiline.max_lines: 500
# After the defined timeout, an multiline event is sent even if no new pattern was found to start a new event
# Default is 5s.
#multiline.timeout: 5s
# To aggregate constant number of lines into a single event use the count mode of multiline.
#multiline.type: count
# The number of lines to aggregate into a single event.
#multiline.count_lines: 3
# Do not add new line character when concatenating lines.
#multiline.skip_newline: false
# Setting tail_files to true means filebeat starts reading new files at the end
# instead of the beginning. If this is used in combination with log rotation
# this can mean that the first entries of a new file are skipped.
#tail_files: false
# The Ingest Node pipeline ID associated with this input. If this is set, it
# overwrites the pipeline option from the Elasticsearch output.
#pipeline:
# If symlinks is enabled, symlinks are opened and harvested. The harvester is opening the
# original for harvesting but will report the symlink name as source.
#symlinks: false
# Backoff values define how aggressively filebeat crawls new files for updates
# The default values can be used in most cases. Backoff defines how long it is waited
# to check a file again after EOF is reached. Default is 1s which means the file
# is checked every second if new lines were added. This leads to a near real time crawling.
# Every time a new line appears, backoff is reset to the initial value.
#backoff: 1s
# Max backoff defines what the maximum backoff time is. After having backed off multiple times
# from checking the files, the waiting time will never exceed max_backoff independent of the
# backoff factor. Having it set to 10s means in the worst case a new line can be added to a log
# file after having backed off multiple times, it takes a maximum of 10s to read the new line
#max_backoff: 10s
# The backoff factor defines how fast the algorithm backs off. The bigger the backoff factor,
# the faster the max_backoff value is reached. If this value is set to 1, no backoff will happen.
# The backoff value will be multiplied each time with the backoff_factor until max_backoff is reached
#backoff_factor: 2
# Max number of harvesters that are started in parallel.
# Default is 0 which means unlimited
#harvester_limit: 0
### Harvester closing options
# Close inactive closes the file handler after the predefined period.
# The period starts when the last line of the file was, not the file ModTime.
# Time strings like 2h (2 hours), 5m (5 minutes) can be used.
#close_inactive: 5m
# Close renamed closes a file handler when the file is renamed or rotated.
# Note: Potential data loss. Make sure to read and understand the docs for this option.
#close_renamed: false
# When enabling this option, a file handler is closed immediately in case a file can't be found
# any more. In case the file shows up again later, harvesting will continue at the last known position
# after scan_frequency.
#close_removed: true
# Closes the file handler as soon as the harvesters reaches the end of the file.
# By default this option is disabled.
# Note: Potential data loss. Make sure to read and understand the docs for this option.
#close_eof: false
### State options
# Files for the modification data is older then clean_inactive the state from the registry is removed
# By default this is disabled.
#clean_inactive: 0
# Removes the state for file which cannot be found on disk anymore immediately
#clean_removed: true
# Close timeout closes the harvester after the predefined time.
# This is independent if the harvester did finish reading the file or not.
# By default this option is disabled.
# Note: Potential data loss. Make sure to read and understand the docs for this option.
#close_timeout: 0
# Defines if inputs is enabled
#enabled: true
#----------------------------- Stdin input -------------------------------
# Configuration to use stdin input
#- type: stdin
#------------------------- Redis slowlog input ---------------------------
# Experimental: Config options for the redis slow log input
#- type: redis
#enabled: false
# List of hosts to pool to retrieve the slow log information.
#hosts: ["localhost:6379"]
# How often the input checks for redis slow log.
#scan_frequency: 10s
# Timeout after which time the input should return an error
#timeout: 1s
# Network type to be used for redis connection. Default: tcp
#network: tcp
# Max number of concurrent connections. Default: 10
#maxconn: 10
# Redis AUTH password. Empty by default.
#password: foobared
#------------------------------ Udp input --------------------------------
# Experimental: Config options for the udp input
#- type: udp
#enabled: false
# Maximum size of the message received over UDP
#max_message_size: 10KiB
# Size of the UDP read buffer in bytes
#read_buffer: 0
#------------------------------ TCP input --------------------------------
# Experimental: Config options for the TCP input
#- type: tcp
#enabled: false
# The host and port to receive the new event
#host: "localhost:9000"
# Character used to split new message
#line_delimiter: "\n"
# Maximum size in bytes of the message received over TCP
#max_message_size: 20MiB
# Max number of concurrent connections, or 0 for no limit. Default: 0
#max_connections: 0
# The number of seconds of inactivity before a remote connection is closed.
#timeout: 300s
# Use SSL settings for TCP.
#ssl.enabled: true
# List of supported/valid TLS versions. By default all TLS versions 1.0 up to
# 1.2 are enabled.
#ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]
# SSL configuration. By default is off.
# List of root certificates for client verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL server authentication.
#ssl.certificate: "/etc/pki/client/cert.pem"
# Server Certificate Key,
#ssl.key: "/etc/pki/client/cert.key"
# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''
# Configure cipher suites to be used for SSL connections.
#ssl.cipher_suites: []
# Configure curve types for ECDHE based cipher suites.
#ssl.curve_types: []
# Configure what types of client authentication are supported. Valid options
# are `none`, `optional`, and `required`. When `certificate_authorities` is set it will
# default to `required` otherwise it will be set to `none`.
#ssl.client_authentication: "required"
#------------------------------ Syslog input --------------------------------
# Experimental: Config options for the Syslog input
# Accept RFC3164 formatted syslog event via UDP.
#- type: syslog
#enabled: false
#protocol.udp:
# The host and port to receive the new event
#host: "localhost:9000"
# Maximum size of the message received over UDP
#max_message_size: 10KiB
# Accept RFC3164 formatted syslog event via TCP.
#- type: syslog
#enabled: false
#protocol.tcp:
# The host and port to receive the new event
#host: "localhost:9000"
# Character used to split new message
#line_delimiter: "\n"
# Maximum size in bytes of the message received over TCP
#max_message_size: 20MiB
# The number of seconds of inactivity before a remote connection is closed.
#timeout: 300s
# Use SSL settings for TCP.
#ssl.enabled: true
# List of supported/valid TLS versions. By default all TLS versions 1.0 up to
# 1.2 are enabled.
#ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]
# SSL configuration. By default is off.
# List of root certificates for client verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL server authentication.
#ssl.certificate: "/etc/pki/client/cert.pem"
# Server Certificate Key,
#ssl.key: "/etc/pki/client/cert.key"
# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''
# Configure cipher suites to be used for SSL connections.
#ssl.cipher_suites: []
# Configure curve types for ECDHE based cipher suites.
#ssl.curve_types: []
# Configure what types of client authentication are supported. Valid options
# are `none`, `optional`, and `required`. When `certificate_authorities` is set it will
# default to `required` otherwise it will be set to `none`.
#ssl.client_authentication: "required"
#------------------------------ Container input --------------------------------
#- type: container
#enabled: false
# Paths for container logs that should be crawled and fetched.
#paths:
# -/var/lib/docker/containers/*/*.log
# Configure stream to filter to a specific stream: stdout, stderr or all (default)
#stream: all
# =========================== Filebeat autodiscover ============================
# Autodiscover allows you to detect changes in the system and spawn new modules
# or inputs as they happen.
#filebeat.autodiscover:
# List of enabled autodiscover providers
# providers:
# - type: docker
# templates:
# - condition:
# equals.docker.container.image: busybox
# config:
# - type: container
# paths:
# - /var/lib/docker/containers/${data.docker.container.id}/*.log
# ========================== Filebeat global options ===========================
# Registry data path. If a relative path is used, it is considered relative to the
# data path.
#filebeat.registry.path: ${path.data}/registry
# The permissions mask to apply on registry data, and meta files. The default
# value is 0600. Must be a valid Unix-style file permissions mask expressed in
# octal notation. This option is not supported on Windows.
#filebeat.registry.file_permissions: 0600
# The timeout value that controls when registry entries are written to disk
# (flushed). When an unwritten update exceeds this value, it triggers a write
# to disk. When flush is set to 0s, the registry is written to disk after each
# batch of events has been published successfully. The default value is 0s.
#filebeat.registry.flush: 0s
# Starting with Filebeat 7.0, the registry uses a new directory format to store
# Filebeat state. After you upgrade, Filebeat will automatically migrate a 6.x
# registry file to use the new directory format. If you changed
# filebeat.registry.path while upgrading, set filebeat.registry.migrate_file to
# point to the old registry file.
#filebeat.registry.migrate_file: ${path.data}/registry
# By default Ingest pipelines are not updated if a pipeline with the same ID
# already exists. If this option is enabled Filebeat overwrites pipelines
# everytime a new Elasticsearch connection is established.
#filebeat.overwrite_pipelines: false
# How long filebeat waits on shutdown for the publisher to finish.
# Default is 0, not waiting.
#filebeat.shutdown_timeout: 0
# Enable filebeat config reloading
#filebeat.config:
#inputs:
#enabled: false
#path: inputs.d/*.yml
#reload.enabled: true
#reload.period: 10s
#modules:
#enabled: false
#path: modules.d/*.yml
#reload.enabled: true
#reload.period: 10s
# ================================== General ===================================
# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
# If this options is not defined, the hostname is used.
#name:
# The tags of the shipper are included in their own field with each
# transaction published. Tags make it easy to group servers by different
# logical properties.
#tags: ["service-X", "web-tier"]
# Optional fields that you can specify to add additional information to the
# output. Fields can be scalar values, arrays, dictionaries, or any nested
# combination of these.
#fields:
# env: staging
# If this option is set to true, the custom fields are stored as top-level
# fields in the output document instead of being grouped under a fields
# sub-dictionary. Default is false.
#fields_under_root: false
# Internal queue configuration for buffering events to be published.
#queue:
# Queue type by name (default 'mem')
# The memory queue will present all available events (up to the outputs
# bulk_max_size) to the output, the moment the output is ready to server
# another batch of events.
#mem:
# Max number of events the queue can buffer.
#events: 4096
# Hints the minimum number of events stored in the queue,
# before providing a batch of events to the outputs.
# The default value is set to 2048.
# A value of 0 ensures events are immediately available
# to be sent to the outputs.
#flush.min_events: 2048
# Maximum duration after which events are available to the outputs,
# if the number of events stored in the queue is < `flush.min_events`.
#flush.timeout: 1s
# The spool queue will store events in a local spool file, before
# forwarding the events to the outputs.
#
# Beta: spooling to disk is currently a beta feature. Use with care.
#
# The spool file is a circular buffer, which blocks once the file/buffer is full.
# Events are put into a write buffer and flushed once the write buffer
# is full or the flush_timeout is triggered.
# Once ACKed by the output, events are removed immediately from the queue,
# making space for new events to be persisted.
#spool:
# The file namespace configures the file path and the file creation settings.
# Once the file exists, the `size`, `page_size` and `prealloc` settings
# will have no more effect.
#file:
# Location of spool file. The default value is ${path.data}/spool.dat.
#path: "${path.data}/spool.dat"
# Configure file permissions if file is created. The default value is 0600.
#permissions: 0600
# File size hint. The spool blocks, once this limit is reached. The default value is 100 MiB.
#size: 100MiB
# The files page size. A file is split into multiple pages of the same size. The default value is 4KiB.
#page_size: 4KiB
# If prealloc is set, the required space for the file is reserved using
# truncate. The default value is true.
#prealloc: true
# Spool writer settings
# Events are serialized into a write buffer. The write buffer is flushed if:
# - The buffer limit has been reached.
# - The configured limit of buffered events is reached.
# - The flush timeout is triggered.
#write:
# Sets the write buffer size.
#buffer_size: 1MiB
# Maximum duration after which events are flushed if the write buffer
# is not full yet. The default value is 1s.
#flush.timeout: 1s
# Number of maximum buffered events. The write buffer is flushed once the
# limit is reached.
#flush.events: 16384
# Configure the on-disk event encoding. The encoding can be changed
# between restarts.
# Valid encodings are: json, ubjson, and cbor.
#codec: cbor
#read:
# Reader flush timeout, waiting for more events to become available, so
# to fill a complete batch as required by the outputs.
# If flush_timeout is 0, all available events are forwarded to the
# outputs immediately.
# The default value is 0s.
#flush.timeout: 0s
# Sets the maximum number of CPUs that can be executing simultaneously. The
# default is the number of logical CPUs available in the system.
#max_procs:
# ================================= Processors =================================
# Processors are used to reduce the number of fields in the exported event or to
# enhance the event with external metadata. This section defines a list of
# processors that are applied one by one and the first one receives the initial
# event:
#
# event -> filter1 -> event1 -> filter2 ->event2 ...
#
# The supported processors are drop_fields, drop_event, include_fields,
# decode_json_fields, and add_cloud_metadata.
#
# For example, you can use the following processors to keep the fields that
# contain CPU load percentages, but remove the fields that contain CPU ticks
# values:
#
#processors:
# - include_fields:
# fields: ["cpu"]
# - drop_fields:
# fields: ["cpu.user", "cpu.system"]
#
# The following example drops the events that have the HTTP response code 200:
#
#processors:
# - drop_event:
# when:
# equals:
# http.code: 200
#
# The following example renames the field a to b:
#
#processors:
# - rename:
# fields:
# - from: "a"
# to: "b"
#
# The following example tokenizes the string into fields:
#
#processors:
# - dissect:
# tokenizer: "%{key1} - %{key2}"
# field: "message"
# target_prefix: "dissect"
#
# The following example enriches each event with metadata from the cloud
# provider about the host machine. It works on EC2, GCE, DigitalOcean,
# Tencent Cloud, and Alibaba Cloud.
#
#processors:
# - add_cloud_metadata: ~
#
# The following example enriches each event with the machine's local time zone
# offset from UTC.
#
#processors:
# - add_locale:
# format: offset
#
# The following example enriches each event with docker metadata, it matches
# given fields to an existing container id and adds info from that container:
#
#processors:
# - add_docker_metadata:
# host: "unix:///var/run/docker.sock"
# match_fields: ["system.process.cgroup.id"]
# match_pids: ["process.pid", "process.ppid"]
# match_source: true
# match_source_index: 4
# match_short_id: false
# cleanup_timeout: 60
# labels.dedot: false
# # To connect to Docker over TLS you must specify a client and CA certificate.
# #ssl:
# # certificate_authority: "/etc/pki/root/ca.pem"
# # certificate: "/etc/pki/client/cert.pem"
# # key: "/etc/pki/client/cert.key"
#
# The following example enriches each event with docker metadata, it matches
# container id from log path available in `source` field (by default it expects
# it to be /var/lib/docker/containers/*/*.log).
#
#processors:
# - add_docker_metadata: ~
#
# The following example enriches each event with host metadata.
#
#processors:
# - add_host_metadata: ~
#
# The following example enriches each event with process metadata using
# process IDs included in the event.
#
#processors:
# - add_process_metadata:
# match_pids: ["system.process.ppid"]
# target: system.process.parent
#
# The following example decodes fields containing JSON strings
# and replaces the strings with valid JSON objects.
#
#processors:
# - decode_json_fields:
# fields: ["field1", "field2", ...]
# process_array: false
# max_depth: 1
# target: ""
# overwrite_keys: false
#
#processors:
# - decompress_gzip_field:
# from: "field1"
# to: "field2"
# ignore_missing: false
# fail_on_error: true
#
# The following example copies the value of message to message_copied
#
#processors:
# - copy_fields:
# fields:
# - from: message
# to: message_copied
# fail_on_error: true
# ignore_missing: false
#
# The following example truncates the value of message to 1024 bytes
#
#processors:
# - truncate_fields:
# fields:
# - message
# max_bytes: 1024
# fail_on_error: false
# ignore_missing: true
#
# The following example preserves the raw message under event.original
#
#processors:
# - copy_fields:
# fields:
# - from: message
# to: event.original
# fail_on_error: false
# ignore_missing: true
# - truncate_fields:
# fields:
# - event.original
# max_bytes: 1024
# fail_on_error: false
# ignore_missing: true
#
# The following example URL-decodes the value of field1 to field2
#
#processors:
# - urldecode:
# fields:
# - from: "field1"
# to: "field2"
# ignore_missing: false
# fail_on_error: true
# =============================== Elastic Cloud ================================
# These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).
# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:
# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:
# ================================== Outputs ===================================
# Configure what output to use when sending the data collected by the beat.
# ---------------------------- Elasticsearch Output ----------------------------
output.elasticsearch:
# Boolean flag to enable or disable the output module.
#enabled: true
# Array of hosts to connect to.
# Scheme and port can be left out and will be set to the default (http and 9200)
# In case you specify and additional path, the scheme is required: http://localhost:9200/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
hosts: ["localhost:9200"]
# Set gzip compression level.
#compression_level: 0
# Configure escaping HTML symbols in strings.
#escape_html: false
# Protocol - either `http` (default) or `https`.
#protocol: "https"
# Authentication credentials - either API key or username/password.
#api_key: "id:api_key"
#username: "elastic"
#password: "changeme"
# Dictionary of HTTP parameters to pass within the URL with index operations.
#parameters:
#param1: value1
#param2: value2
# Number of workers per Elasticsearch host.
#worker: 1
# Optional index name. The default is "filebeat" plus date
# and generates [filebeat-]YYYY.MM.DD keys.
# In case you modify this pattern you must update setup.template.name and setup.template.pattern accordingly.
#index: "filebeat-%{[agent.version]}-%{+yyyy.MM.dd}"
# Optional ingest node pipeline. By default no pipeline will be used.
#pipeline: ""
# Optional HTTP path
#path: "/elasticsearch"
# Custom HTTP headers to add to each request
#headers:
# X-My-Header: Contents of the header
# Proxy server URL
#proxy_url: http://proxy:3128
# Whether to disable proxy settings for outgoing connections. If true, this
# takes precedence over both the proxy_url field and any environment settings
# (HTTP_PROXY, HTTPS_PROXY). The default is false.
#proxy_disable: false
# The number of times a particular Elasticsearch index operation is attempted. If
# the indexing operation doesn't succeed after this many retries, the events are
# dropped. The default is 3.
#max_retries: 3
# The maximum number of events to bulk in a single Elasticsearch bulk API index request.
# The default is 50.
#bulk_max_size: 50
# The number of seconds to wait before trying to reconnect to Elasticsearch
# after a network error. After waiting backoff.init seconds, the Beat
# tries to reconnect. If the attempt fails, the backoff timer is increased
# exponentially up to backoff.max. After a successful connection, the backoff
# timer is reset. The default is 1s.
#backoff.init: 1s
# The maximum number of seconds to wait before attempting to connect to
# Elasticsearch after a network error. The default is 60s.
#backoff.max: 60s
# Configure HTTP request timeout before failing a request to Elasticsearch.
#timeout: 90
# Use SSL settings for HTTPS.
#ssl.enabled: true
# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL-based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full
# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client certificate key
#ssl.key: "/etc/pki/client/cert.key"
# Optional passphrase for decrypting the certificate key.
#ssl.key_passphrase: ''
# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []
# Configure curve types for ECDHE-based cipher suites
#ssl.curve_types: []
# Configure what types of renegotiation are supported. Valid options are
# never, once, and freely. Default is never.
#ssl.renegotiation: never
# Configure a pin that can be used to do extra validation of the verified certificate chain,
# this allow you to ensure that a specific certificate is used to validate the chain of trust.
#
# The pin is a base64 encoded string of the SHA-256 fingerprint.
#ssl.ca_sha256: ""
# Enable Kerberos support. Kerberos is automatically enabled if any Kerberos setting is set.
#kerberos.enabled: true
# Authentication type to use with Kerberos. Available options: keytab, password.
#kerberos.auth_type: password
# Path to the keytab file. It is used when auth_type is set to keytab.
#kerberos.keytab: /etc/elastic.keytab
# Path to the Kerberos configuration.
#kerberos.config_path: /etc/krb5.conf
# Name of the Kerberos user.
#kerberos.username: elastic
# Password of the Kerberos user. It is used when auth_type is set to password.
#kerberos.password: changeme
# Kerberos realm.
#kerberos.realm: ELASTIC
# ------------------------------ Logstash Output -------------------------------
#output.logstash:
# Boolean flag to enable or disable the output module.
#enabled: true
# The Logstash hosts
#hosts: ["localhost:5044"]
# Number of workers per Logstash host.
#worker: 1
# Set gzip compression level.
#compression_level: 3
# Configure escaping HTML symbols in strings.
#escape_html: false
# Optional maximum time to live for a connection to Logstash, after which the
# connection will be re-established. A value of `0s` (the default) will
# disable this feature.
#
# Not yet supported for async connections (i.e. with the "pipelining" option set)
#ttl: 30s
# Optionally load-balance events between Logstash hosts. Default is false.
#loadbalance: false
# Number of batches to be sent asynchronously to Logstash while processing
# new batches.
#pipelining: 2
# If enabled only a subset of events in a batch of events is transferred per
# transaction. The number of events to be sent increases up to `bulk_max_size`
# if no error is encountered.
#slow_start: false
# The number of seconds to wait before trying to reconnect to Logstash
# after a network error. After waiting backoff.init seconds, the Beat
# tries to reconnect. If the attempt fails, the backoff timer is increased
# exponentially up to backoff.max. After a successful connection, the backoff
# timer is reset. The default is 1s.
#backoff.init: 1s
# The maximum number of seconds to wait before attempting to connect to
# Logstash after a network error. The default is 60s.
#backoff.max: 60s
# Optional index name. The default index name is set to filebeat
# in all lowercase.
#index: 'filebeat'
# SOCKS5 proxy server URL
#proxy_url: socks5://user:password@socks5-server:2233
# Resolve names locally when using a proxy server. Defaults to false.
#proxy_use_local_resolver: false
# Enable SSL support. SSL is automatically enabled if any SSL setting is set.
#ssl.enabled: true
# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full
# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]
# Optional SSL configuration options. SSL is off by default.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client certificate key
#ssl.key: "/etc/pki/client/cert.key"
# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''
# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []
# Configure curve types for ECDHE-based cipher suites
#ssl.curve_types: []
# Configure what types of renegotiation are supported. Valid options are
# never, once, and freely. Default is never.
#ssl.renegotiation: never
# Configure a pin that can be used to do extra validation of the verified certificate chain,
# this allow you to ensure that a specific certificate is used to validate the chain of trust.
#
# The pin is a base64 encoded string of the SHA-256 fingerprint.
#ssl.ca_sha256: ""
# The number of times to retry publishing an event after a publishing failure.
# After the specified number of retries, the events are typically dropped.
# Some Beats, such as Filebeat and Winlogbeat, ignore the max_retries setting
# and retry until all events are published. Set max_retries to a value less
# than 0 to retry until all events are published. The default is 3.
#max_retries: 3
# The maximum number of events to bulk in a single Logstash request. The
# default is 2048.
#bulk_max_size: 2048
# The number of seconds to wait for responses from the Logstash server before
# timing out. The default is 30s.
#timeout: 30s
# -------------------------------- Kafka Output --------------------------------
#output.kafka:
# Boolean flag to enable or disable the output module.
#enabled: true
# The list of Kafka broker addresses from which to fetch the cluster metadata.
# The cluster metadata contain the actual Kafka brokers events are published
# to.
#hosts: ["localhost:9092"]
# The Kafka topic used for produced events. The setting can be a format string
# using any event field. To set the topic from document type use `%{[type]}`.
#topic: beats
# The Kafka event key setting. Use format string to create a unique event key.
# By default no event key will be generated.
#key: ''
# The Kafka event partitioning strategy. Default hashing strategy is `hash`
# using the `output.kafka.key` setting or randomly distributes events if
# `output.kafka.key` is not configured.
#partition.hash:
# If enabled, events will only be published to partitions with reachable
# leaders. Default is false.
#reachable_only: false
# Configure alternative event field names used to compute the hash value.
# If empty `output.kafka.key` setting will be used.
# Default value is empty list.
#hash: []
# Authentication details. Password is required if username is set.
#username: ''
#password: ''
# Kafka version Filebeat is assumed to run against. Defaults to the "1.0.0".
#version: '1.0.0'
# Configure JSON encoding
#codec.json:
# Pretty-print JSON event
#pretty: false
# Configure escaping HTML symbols in strings.
#escape_html: false
# Metadata update configuration. Metadata contains leader information
# used to decide which broker to use when publishing.
#metadata:
# Max metadata request retry attempts when cluster is in middle of leader
# election. Defaults to 3 retries.
#retry.max: 3
# Wait time between retries during leader elections. Default is 250ms.
#retry.backoff: 250ms
# Refresh metadata interval. Defaults to every 10 minutes.
#refresh_frequency: 10m
# Strategy for fetching the topics metadata from the broker. Default is false.
#full: false
# The number of concurrent load-balanced Kafka output workers.
#worker: 1
# The number of times to retry publishing an event after a publishing failure.
# After the specified number of retries, events are typically dropped.
# Some Beats, such as Filebeat, ignore the max_retries setting and retry until
# all events are published. Set max_retries to a value less than 0 to retry
# until all events are published. The default is 3.
#max_retries: 3
# The number of seconds to wait before trying to republish to Kafka
# after a network error. After waiting backoff.init seconds, the Beat
# tries to republish. If the attempt fails, the backoff timer is increased
# exponentially up to backoff.max. After a successful publish, the backoff
# timer is reset. The default is 1s.
#backoff.init: 1s
# The maximum number of seconds to wait before attempting to republish to
# Kafka after a network error. The default is 60s.
#backoff.max: 60s
# The maximum number of events to bulk in a single Kafka request. The default
# is 2048.
#bulk_max_size: 2048
# Duration to wait before sending bulk Kafka request. 0 is no delay. The default
# is 0.
#bulk_flush_frequency: 0s
# The number of seconds to wait for responses from the Kafka brokers before
# timing out. The default is 30s.
#timeout: 30s
# The maximum duration a broker will wait for number of required ACKs. The
# default is 10s.
#broker_timeout: 10s
# The number of messages buffered for each Kafka broker. The default is 256.
#channel_buffer_size: 256
# The keep-alive period for an active network connection. If 0s, keep-alives
# are disabled. The default is 0 seconds.
#keep_alive: 0
# Sets the output compression codec. Must be one of none, snappy and gzip. The
# default is gzip.
#compression: gzip
# Set the compression level. Currently only gzip provides a compression level
# between 0 and 9. The default value is chosen by the compression algorithm.
#compression_level: 4
# The maximum permitted size of JSON-encoded messages. Bigger messages will be
# dropped. The default value is 1000000 (bytes). This value should be equal to
# or less than the broker's message.max.bytes.
#max_message_bytes: 1000000
# The ACK reliability level required from broker. 0=no response, 1=wait for
# local commit, -1=wait for all replicas to commit. The default is 1. Note:
# If set to 0, no ACKs are returned by Kafka. Messages might be lost silently
# on error.
#required_acks: 1
# The configurable ClientID used for logging, debugging, and auditing
# purposes. The default is "beats".
#client_id: beats
# Enable SSL support. SSL is automatically enabled if any SSL setting is set.
#ssl.enabled: true
# Optional SSL configuration options. SSL is off by default.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full
# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client Certificate Key
#ssl.key: "/etc/pki/client/cert.key"
# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''
# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []
# Configure curve types for ECDHE-based cipher suites
#ssl.curve_types: []
# Configure what types of renegotiation are supported. Valid options are
# never, once, and freely. Default is never.
#ssl.renegotiation: never
# Enable Kerberos support. Kerberos is automatically enabled if any Kerberos setting is set.
#kerberos.enabled: true
# Authentication type to use with Kerberos. Available options: keytab, password.
#kerberos.auth_type: password
# Path to the keytab file. It is used when auth_type is set to keytab.
#kerberos.keytab: /etc/security/keytabs/kafka.keytab
# Path to the Kerberos configuration.
#kerberos.config_path: /etc/krb5.conf
# The service name. Service principal name is contructed from
# service_name/hostname@realm.
#kerberos.service_name: kafka
# Name of the Kerberos user.
#kerberos.username: elastic
# Password of the Kerberos user. It is used when auth_type is set to password.
#kerberos.password: changeme
# Kerberos realm.
#kerberos.realm: ELASTIC
# -------------------------------- Redis Output --------------------------------
#output.redis:
# Boolean flag to enable or disable the output module.
#enabled: true
# Configure JSON encoding
#codec.json:
# Pretty print json event
#pretty: false
# Configure escaping HTML symbols in strings.
#escape_html: false
# The list of Redis servers to connect to. If load-balancing is enabled, the
# events are distributed to the servers in the list. If one server becomes
# unreachable, the events are distributed to the reachable servers only.
# The hosts setting supports redis and rediss urls with custom password like
# redis://:password@localhost:6379.
#hosts: ["localhost:6379"]
# The name of the Redis list or channel the events are published to. The
# default is filebeat.
#key: filebeat
# The password to authenticate to Redis with. The default is no authentication.
#password:
# The Redis database number where the events are published. The default is 0.
#db: 0
# The Redis data type to use for publishing events. If the data type is list,
# the Redis RPUSH command is used. If the data type is channel, the Redis
# PUBLISH command is used. The default value is list.
#datatype: list
# The number of workers to use for each host configured to publish events to
# Redis. Use this setting along with the loadbalance option. For example, if
# you have 2 hosts and 3 workers, in total 6 workers are started (3 for each
# host).
#worker: 1
# If set to true and multiple hosts or workers are configured, the output
# plugin load balances published events onto all Redis hosts. If set to false,
# the output plugin sends all events to only one host (determined at random)
# and will switch to another host if the currently selected one becomes
# unreachable. The default value is true.
#loadbalance: true
# The Redis connection timeout in seconds. The default is 5 seconds.
#timeout: 5s
# The number of times to retry publishing an event after a publishing failure.
# After the specified number of retries, the events are typically dropped.
# Some Beats, such as Filebeat, ignore the max_retries setting and retry until
# all events are published. Set max_retries to a value less than 0 to retry
# until all events are published. The default is 3.
#max_retries: 3
# The number of seconds to wait before trying to reconnect to Redis
# after a network error. After waiting backoff.init seconds, the Beat
# tries to reconnect. If the attempt fails, the backoff timer is increased
# exponentially up to backoff.max. After a successful connection, the backoff
# timer is reset. The default is 1s.
#backoff.init: 1s
# The maximum number of seconds to wait before attempting to connect to
# Redis after a network error. The default is 60s.
#backoff.max: 60s
# The maximum number of events to bulk in a single Redis request or pipeline.
# The default is 2048.
#bulk_max_size: 2048
# The URL of the SOCKS5 proxy to use when connecting to the Redis servers. The
# value must be a URL with a scheme of socks5://.
#proxy_url:
# This option determines whether Redis hostnames are resolved locally when
# using a proxy. The default value is false, which means that name resolution
# occurs on the proxy server.
#proxy_use_local_resolver: false
# Enable SSL support. SSL is automatically enabled, if any SSL setting is set.
#ssl.enabled: true
# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full
# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]
# Optional SSL configuration options. SSL is off by default.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client Certificate Key
#ssl.key: "/etc/pki/client/cert.key"
# Optional passphrase for decrypting the Certificate Key.
#ssl.key_passphrase: ''
# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []
# Configure curve types for ECDHE based cipher suites
#ssl.curve_types: []
# Configure what types of renegotiation are supported. Valid options are
# never, once, and freely. Default is never.
#ssl.renegotiation: never
# -------------------------------- File Output ---------------------------------
#output.file:
# Boolean flag to enable or disable the output module.
#enabled: true
# Configure JSON encoding
#codec.json:
# Pretty-print JSON event
#pretty: false
# Configure escaping HTML symbols in strings.
#escape_html: false
# Path to the directory where to save the generated files. The option is
# mandatory.
#path: "/tmp/filebeat"
# Name of the generated files. The default is `filebeat` and it generates
# files: `filebeat`, `filebeat.1`, `filebeat.2`, etc.
#filename: filebeat
# Maximum size in kilobytes of each file. When this size is reached, and on
# every Filebeat restart, the files are rotated. The default value is 10240
# kB.
#rotate_every_kb: 10000
# Maximum number of files under path. When this number of files is reached,
# the oldest file is deleted and the rest are shifted from last to first. The
# default is 7 files.
#number_of_files: 7
# Permissions to use for file creation. The default is 0600.
#permissions: 0600
# ------------------------------- Console Output -------------------------------
#output.console:
# Boolean flag to enable or disable the output module.
#enabled: true
# Configure JSON encoding
#codec.json:
# Pretty-print JSON event
#pretty: false
# Configure escaping HTML symbols in strings.
#escape_html: false
# =================================== Paths ====================================
# The home path for the Filebeat installation. This is the default base path
# for all other path settings and for miscellaneous files that come with the
# distribution (for example, the sample dashboards).
# If not set by a CLI flag or in the configuration file, the default for the
# home path is the location of the binary.
#path.home:
# The configuration path for the Filebeat installation. This is the default
# base path for configuration files, including the main YAML configuration file
# and the Elasticsearch template file. If not set by a CLI flag or in the
# configuration file, the default for the configuration path is the home path.
#path.config: ${path.home}
# The data path for the Filebeat installation. This is the default base path
# for all the files in which Filebeat needs to store its data. If not set by a
# CLI flag or in the configuration file, the default for the data path is a data
# subdirectory inside the home path.
#path.data: ${path.home}/data
# The logs path for a Filebeat installation. This is the default location for
# the Beat's log files. If not set by a CLI flag or in the configuration file,
# the default for the logs path is a logs subdirectory inside the home path.
#path.logs: ${path.home}/logs
# ================================== Keystore ==================================
# Location of the Keystore containing the keys and their sensitive values.
#keystore.path: "${path.config}/beats.keystore"
# ================================= Dashboards =================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards are disabled by default and can be enabled either by setting the
# options here, or by using the `-setup` CLI flag or the `setup` command.
#setup.dashboards.enabled: false
# The directory from where to read the dashboards. The default is the `kibana`
# folder in the home path.
#setup.dashboards.directory: ${path.home}/kibana
# The URL from where to download the dashboards archive. It is used instead of
# the directory if it has a value.
#setup.dashboards.url:
# The file archive (zip file) from where to read the dashboards. It is used instead
# of the directory when it has a value.
#setup.dashboards.file:
# In case the archive contains the dashboards from multiple Beats, this lets you
# select which one to load. You can load all the dashboards in the archive by
# setting this to the empty string.
#setup.dashboards.beat: filebeat
# The name of the Kibana index to use for setting the configuration. Default is ".kibana"
#setup.dashboards.kibana_index: .kibana
# The Elasticsearch index name. This overwrites the index name defined in the
# dashboards and index pattern. Example: testbeat-*
#setup.dashboards.index:
# Always use the Kibana API for loading the dashboards instead of autodetecting
# how to install the dashboards by first querying Elasticsearch.
#setup.dashboards.always_kibana: false
# If true and Kibana is not reachable at the time when dashboards are loaded,
# it will retry to reconnect to Kibana instead of exiting with an error.
#setup.dashboards.retry.enabled: false
# Duration interval between Kibana connection retries.
#setup.dashboards.retry.interval: 1s
# Maximum number of retries before exiting with an error, 0 for unlimited retrying.
#setup.dashboards.retry.maximum: 0
# ================================== Template ==================================
# A template is used to set the mapping in Elasticsearch
# By default template loading is enabled and the template is loaded.
# These settings can be adjusted to load your own template or overwrite existing ones.
# Set to false to disable template loading.
#setup.template.enabled: true
# Template name. By default the template name is "filebeat-%{[agent.version]}"
# The template name and pattern has to be set in case the Elasticsearch index pattern is modified.
#setup.template.name: "filebeat-%{[agent.version]}"
# Template pattern. By default the template pattern is "-%{[agent.version]}-*" to apply to the default index settings.
# The first part is the version of the beat and then -* is used to match all daily indices.
# The template name and pattern has to be set in case the Elasticsearch index pattern is modified.
#setup.template.pattern: "filebeat-%{[agent.version]}-*"
# Path to fields.yml file to generate the template
#setup.template.fields: "${path.config}/fields.yml"
# A list of fields to be added to the template and Kibana index pattern. Also
# specify setup.template.overwrite: true to overwrite the existing template.
#setup.template.append_fields:
#- name: field_name
# type: field_type
# Enable JSON template loading. If this is enabled, the fields.yml is ignored.
#setup.template.json.enabled: false
# Path to the JSON template file
#setup.template.json.path: "${path.config}/template.json"
# Name under which the template is stored in Elasticsearch
#setup.template.json.name: ""
# Overwrite existing template
#setup.template.overwrite: false
# Elasticsearch template settings
setup.template.settings:
# A dictionary of settings to place into the settings.index dictionary
# of the Elasticsearch template. For more details, please check
# https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping.html
#index:
#number_of_shards: 1
#codec: best_compression
# A dictionary of settings for the _source field. For more details, please check
# https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping-source-field.html
#_source:
#enabled: false
# ====================== Index Lifecycle Management (ILM) ======================
# Configure index lifecycle management (ILM). These settings create a write
# alias and add additional settings to the index template. When ILM is enabled,
# output.elasticsearch.index is ignored, and the write alias is used to set the
# index name.
# Enable ILM support. Valid values are true, false, and auto. When set to auto
# (the default), the Beat uses index lifecycle management when it connects to a
# cluster that supports ILM; otherwise, it creates daily indices.
#setup.ilm.enabled: auto
# Set the prefix used in the index lifecycle write alias name. The default alias
# name is 'filebeat-%{[agent.version]}'.
#setup.ilm.rollover_alias: 'filebeat'
# Set the rollover index pattern. The default is "%{now/d}-000001".
#setup.ilm.pattern: "{now/d}-000001"
# Set the lifecycle policy name. The default policy name is
# 'beatname'.
#setup.ilm.policy_name: "mypolicy"
# The path to a JSON file that contains a lifecycle policy configuration. Used
# to load your own lifecycle policy.
#setup.ilm.policy_file:
# Disable the check for an existing lifecycle policy. The default is true. If
# you disable this check, set setup.ilm.overwrite: true so the lifecycle policy
# can be installed.
#setup.ilm.check_exists: true
# Overwrite the lifecycle policy at startup. The default is false.
#setup.ilm.overwrite: false
# =================================== Kibana ===================================
# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:
# Kibana Host
# Scheme and port can be left out and will be set to the default (http and 5601)
# In case you specify and additional path, the scheme is required: http://localhost:5601/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
#host: "localhost:5601"
# Optional protocol and basic auth credentials.
#protocol: "https"
#username: "elastic"
#password: "changeme"
# Optional HTTP path
#path: ""
# Optional Kibana space ID.
#space.id: ""
# Custom HTTP headers to add to each request
#headers:
# X-My-Header: Contents of the header
# Use SSL settings for HTTPS. Default is true.
#ssl.enabled: true
# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full
# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]
# SSL configuration. The default is off.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client certificate key
#ssl.key: "/etc/pki/client/cert.key"
# Optional passphrase for decrypting the certificate key.
#ssl.key_passphrase: ''
# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []
# Configure curve types for ECDHE-based cipher suites
#ssl.curve_types: []
# ================================== Logging ===================================
# There are four options for the log output: file, stderr, syslog, eventlog
# The file output is the default.
# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: info
# Enable debug output for selected components. To enable all selectors use ["*"]
# Other available selectors are "beat", "publish", "service"
# Multiple selectors can be chained.
#logging.selectors: [ ]
# Send all logging output to stderr. The default is false.
#logging.to_stderr: false
# Send all logging output to syslog. The default is false.
#logging.to_syslog: false
# Send all logging output to Windows Event Logs. The default is false.
#logging.to_eventlog: false
# If enabled, Filebeat periodically logs its internal metrics that have changed
# in the last period. For each metric that changed, the delta from the value at
# the beginning of the period is logged. Also, the total values for
# all non-zero internal metrics are logged on shutdown. The default is true.
#logging.metrics.enabled: true
# The period after which to log the internal metrics. The default is 30s.
#logging.metrics.period: 30s
# Logging to rotating files. Set logging.to_files to false to disable logging to
# files.
logging.to_files: true
logging.files:
# Configure the path where the logs are written. The default is the logs directory
# under the home path (the binary location).
#path: /var/log/filebeat
# The name of the files where the logs are written to.
#name: filebeat
# Configure log file size limit. If limit is reached, log file will be
# automatically rotated
#rotateeverybytes: 10485760 # = 10MB
# Number of rotated log files to keep. Oldest files will be deleted first.
#keepfiles: 7
# The permissions mask to apply when rotating log files. The default value is 0600.
# Must be a valid Unix-style file permissions mask expressed in octal notation.
#permissions: 0600
# Enable log file rotation on time intervals in addition to size-based rotation.
# Intervals must be at least 1s. Values of 1m, 1h, 24h, 7*24h, 30*24h, and 365*24h
# are boundary-aligned with minutes, hours, days, weeks, months, and years as
# reported by the local system clock. All other intervals are calculated from the
# Unix epoch. Defaults to disabled.
#interval: 0
# Rotate existing logs on startup rather than appending to the existing
# file. Defaults to true.
# rotateonstartup: true
# Set to true to log messages in JSON format.
#logging.json: false
# Set to true, to log messages with minimal required Elastic Common Schema (ECS)
# information. Recommended to use in combination with `logging.json=true`
# Defaults to false.
#logging.ecs: false
# ============================= X-Pack Monitoring ==============================
# Filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster. This requires xpack monitoring to be enabled in Elasticsearch. The
# reporting is disabled by default.
# Set to true to enable the monitoring reporter.
#monitoring.enabled: false
# Sets the UUID of the Elasticsearch cluster under which monitoring data for this
# Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
#monitoring.cluster_uuid:
# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well.
# Note that the settings should point to your Elasticsearch *monitoring* cluster.
# Any setting that is not set is automatically inherited from the Elasticsearch
# output configuration, so if you have the Elasticsearch output configured such
# that it is pointing to your Elasticsearch monitoring cluster, you can simply
# uncomment the following line.
#monitoring.elasticsearch:
# Array of hosts to connect to.
# Scheme and port can be left out and will be set to the default (http and 9200)
# In case you specify and additional path, the scheme is required: http://localhost:9200/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
#hosts: ["localhost:9200"]
# Set gzip compression level.
#compression_level: 0
# Protocol - either `http` (default) or `https`.
#protocol: "https"
# Authentication credentials - either API key or username/password.
#api_key: "id:api_key"
#username: "beats_system"
#password: "changeme"
# Dictionary of HTTP parameters to pass within the URL with index operations.
#parameters:
#param1: value1
#param2: value2
# Custom HTTP headers to add to each request
#headers:
# X-My-Header: Contents of the header
# Proxy server url
#proxy_url: http://proxy:3128
# The number of times a particular Elasticsearch index operation is attempted. If
# the indexing operation doesn't succeed after this many retries, the events are
# dropped. The default is 3.
#max_retries: 3
# The maximum number of events to bulk in a single Elasticsearch bulk API index request.
# The default is 50.
#bulk_max_size: 50
# The number of seconds to wait before trying to reconnect to Elasticsearch
# after a network error. After waiting backoff.init seconds, the Beat
# tries to reconnect. If the attempt fails, the backoff timer is increased
# exponentially up to backoff.max. After a successful connection, the backoff
# timer is reset. The default is 1s.
#backoff.init: 1s
# The maximum number of seconds to wait before attempting to connect to
# Elasticsearch after a network error. The default is 60s.
#backoff.max: 60s
# Configure HTTP request timeout before failing an request to Elasticsearch.
#timeout: 90
# Use SSL settings for HTTPS.
#ssl.enabled: true
# Configure SSL verification mode. If `none` is configured, all server hosts
# and certificates will be accepted. In this mode, SSL based connections are
# susceptible to man-in-the-middle attacks. Use only for testing. Default is
# `full`.
#ssl.verification_mode: full
# List of supported/valid TLS versions. By default all TLS versions from 1.1
# up to 1.3 are enabled.
#ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]
# SSL configuration. The default is off.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client certificate key
#ssl.key: "/etc/pki/client/cert.key"
# Optional passphrase for decrypting the certificate key.
#ssl.key_passphrase: ''
# Configure cipher suites to be used for SSL connections
#ssl.cipher_suites: []
# Configure curve types for ECDHE-based cipher suites
#ssl.curve_types: []
# Configure what types of renegotiation are supported. Valid options are
# never, once, and freely. Default is never.
#ssl.renegotiation: never
# Enable Kerberos support. Kerberos is automatically enabled if any Kerberos setting is set.
#kerberos.enabled: true
# Authentication type to use with Kerberos. Available options: keytab, password.
#kerberos.auth_type: password
# Path to the keytab file. It is used when auth_type is set to keytab.
#kerberos.keytab: /etc/elastic.keytab
# Path to the Kerberos configuration.
#kerberos.config_path: /etc/krb5.conf
# Name of the Kerberos user.
#kerberos.username: elastic
# Password of the Kerberos user. It is used when auth_type is set to password.
#kerberos.password: changeme
# Kerberos realm.
#kerberos.realm: ELASTIC
#metrics.period: 10s
#state.period: 1m
# The `monitoring.cloud.id` setting overwrites the `monitoring.elasticsearch.hosts`
# setting. You can find the value for this setting in the Elastic Cloud web UI.
#monitoring.cloud.id:
# The `monitoring.cloud.auth` setting overwrites the `monitoring.elasticsearch.username`
# and `monitoring.elasticsearch.password` settings. The format is `<user>:<pass>`.
#monitoring.cloud.auth:
# =============================== HTTP Endpoint ================================
# Each beat can expose internal metrics through a HTTP endpoint. For security
# reasons the endpoint is disabled by default. This feature is currently experimental.
# Stats can be access through http://localhost:5066/stats . For pretty JSON output
# append ?pretty to the URL.
# Defines if the HTTP endpoint is enabled.
#http.enabled: false
# The HTTP endpoint will bind to this hostname, IP address, unix socket or named pipe.
# When using IP addresses, it is recommended to only use localhost.
#http.host: localhost
# Port on which the HTTP endpoint will bind. Default is 5066.
#http.port: 5066
# Define which user should be owning the named pipe.
#http.named_pipe.user:
# Define which the permissions that should be applied to the named pipe, use the Security
# Descriptor Definition Language (SDDL) to define the permission. This option cannot be used with
# `http.user`.
#http.named_pipe.security_descriptor:
# ============================== Process Security ==============================
# Enable or disable seccomp system call filtering on Linux. Default is enabled.
#seccomp.enabled: true
# ============================== Instrumentation ===============================
# Instrumentation support for the filebeat.
#instrumentation:
# Set to true to enable instrumentation of filebeat.
#enabled: false
# Environment in which filebeat is running on (eg: staging, production, etc.)
#environment: ""
# APM Server hosts to report instrumentation results to.
#hosts:
# - http://localhost:8200
# API Key for the APM Server(s).
# If api_key is set then secret_token will be ignored.
#api_key:
# Secret token for the APM Server(s).
#secret_token:
# Enable profiling of the server, recording profile samples as events.
#
# This feature is experimental.
#profiling:
#cpu:
# Set to true to enable CPU profiling.
#enabled: false
#interval: 60s
#duration: 10s
#heap:
# Set to true to enable heap profiling.
#enabled: false
#interval: 60s
# ================================= Migration ==================================
# This allows to enable 6.7 migration aliases
#migration.6_to_7.enabled: false
569
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
