最近查看老项目Xcode版本从Xcode6.N进级到Xcode7.2后,顺序编译报错,出现问题:其实就是一个很常见的问题,很多项目在替换Xcode版本后都有如下报错
Undefined symbols for architecture x86_64:
"_OBJC_CLASS_$_QQApiInterface", referenced from:
objc-class-ref in AppDelegate.o
"_OBJC_CLASS_$_ShareSDK", referenced from:
objc-class-ref in AppDelegate.o
objc-class-ref in RecipeDetailViewController.o
objc-class-ref in showViewController.o
objc-class-ref in video_show.o
"_OBJC_CLASS_$_TencentOAuth", referenced from:
objc-class-ref in AppDelegate.o
"_OBJC_CLASS_$_WXApi", referenced from:
objc-class-ref in AppDelegate.o
"_OBJC_CLASS_$_WeiboApi", referenced from:
objc-class-ref in AppDelegate.o
"_OBJC_CLASS_$_YXApi", referenced from:
objc-class-ref in AppDelegate.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
比如:Xcode升级到6.1.1 默认让所有App都通过64位编译器编译。原来在Xcode6.0的时候默认的Architectures只有(arm7,armv7s),到6.1.1默认就带上arm64的参数了。
解决方案:
- 1 .选中Targets—>Build Settings—>Architectures。
把build active architectures only 改为 NO。
2 . 把最下面的Valid Architectures中的arm64参数删掉就可以了
或者:
‘双击Architectures
选择other,删除
$(ARCH_STANDARD)
然后增加armv7和armv7s(写上:$(ARCHS_STANDARD_32_BIT))。
设置如图:
3.clean 再build。