- 博客(0)
- 资源 (10)
- 收藏
- 关注
SJA1105PQRS数据手册.pdf
The SJA1105P/Q/R/S is a 5-port automotive Ethernet switch supporting IEEE Audio
Video Bridging (AVB) and Time-Sensitive Networking (TSN) standards. Each of the
five ports can be individually configured to operate at 10/100/1000 Mbit/s. This feature
provides the flexibility to connect any Fast/Gigabit/optical PHY or MCU/MPU to any of
the ports. Examples of external PHYs are the TJA1100 and TJA1102 IEEE 100BASE-T1
PHYs from NXP Semiconductors
2021-11-17
车载以太网PHY TJA1101A用户手册.pdf
This reference document describes the configuration, register structure and
mapping of the TJA1101A Ethernet PHY.
2021-11-17
车载以太网PHY TJA1101B数据手册.pdf
The TJA1101B is a 100BASE-T1-compliant Ethernet PHY optimized for automotive use
cases such as gateways, IP camera links, radar modules, driver assistance systems and
back-bone networks. The device provides 100 Mbit/s transmit and receive capability over
a single unshielded twisted-pair cable, supporting a cable length of up to at least 15 m.
The TJA1101B has been designed for automotive robustness and ISO 26262, ASIL-A
compliance, while minimizing power consumption and system costs.
2021-11-17
车载以太网PHY TJA1100评估板用户手册.pdf
This document describes the usage of the TJA1100 Customer Evaluation Board. The
Board supports the evaluation of the TJA1100 with providing (MII) a 40-pins standard
header (including MII/SMI/control signals/power supplies. Details can be found in section
2.3.1) with 2,54mm pinning distance to a host controller board, the bus interface (MDI)
including a srew terminal (SMKDS) connector as well as needed components for the
power supply and operation. Further information is given in the following sections.
2021-11-17
PXISPEC20.pdf
This SPEC describes the primary objectives and scope of the PCI eXtensions for
Instrumentation (PXI) specification. It also defines the intended audience and lists
relevant terminology and documents.
2020-02-23
FMC FPGA标准接口卡规范-VITA57.1.pdf
This standard describes FMC IO modules and introduces an electro-mechanical standard
that creates a low overhead protocol bridge. This is between the front panel IO, on the
mezzanine module, and an FPGA processing device on the carrier card, which accepts
the mezzanine module.
2020-02-23
PICMG 2.11.pdf
PICMG 2.11 defines the electrical and mechanical interfaces, and minimum
requirements for modular CompactPCI pluggable power supplies and related
CompactPCI platforms based on the CompactPCI core specification PICMG 2.0
R2.1. Although the CompactPCI core specification PICMG 2.0 R2.1 defines an
optional pluggable power supply connector interface; this interface is inadequate to
support many higher power applications. This specification, PICMG 2.1, provides a
defined interface to support higher power supply output current levels and 6U form
factor power supplies, as well as providing some additional functionality to support
Hot Swap applications, and a growth path for high availability systems.
2020-02-23
PICMG 2.5.pdf
The goal of this specification is to extend the capabilities and utility of the CompactPCI
6U based system architecture to support the application needs of the Computer
Telephony (CT) industry, by providing CompactPCI system vendors and CT board
vendors with specifications that will promote multi-vendor interoperability and support
the design of open, standards based components and systems. These goals include
provisions for intra-system isochronous (TDM) media transport, common telephony
I/O definition, reliable hot swap of CT Front Boards and peripherals, as well as agencyaware safety recommendations.
2020-02-23
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人