整个网络的拓扑结构如下图所示
其中PE1和CE1间起的ISIS路由协议,PE1——P1——P2——PE2间通过OSPF协议来构建网路,PE2和CE2间起的也是OSPF协议。
在GNS下用的Cisco+IOS+-+c7200-advipservicesk9-mz.124-2.T.image的IOS。其中关于接口ip的定义就不列举了,图上已经把各个路由器的ip标示的很清楚了。
(1)配置ISIS(PE1——CE1)
PE1:
router isis
net 01.0000.0000.0002.00
is-type level-1
int e1/0
ip router isis //在接口下启动isis
CE1:
router isis
net 01.0000.0000.0001.00
is-type level-1
int e1/0
ip router isis //在接口下启动isis