Android HandlerThread

HandlerThread继承Thread，是一个包含了Looper的Thread,方便了子线程之间的通信。

源码：

/*
 * Copyright (C) 2006 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.os;

/**
 * Handy class for starting a new thread that has a looper. The looper can then be 
 * used to create handler classes. Note that start() must still be called.
 */
public class HandlerThread extends Thread {
    int mPriority;
    int mTid = -1;
    Looper mLooper;

    public HandlerThread(String name) {
        super(name);
        mPriority = Process.THREAD_PRIORITY_DEFAULT;
    }
    
    /**
     * Constructs a HandlerThread.
     * @param name
     * @param priority The priority to run the thread at. The value supplied must be from 
     * {@link android.os.Process} and not from java.lang.Thread.
     */
    public HandlerThread(String name, int priority) {
        super(name);
        mPriority = priority;
    }
    
    /**
     * Call back method that can be explicitly overridden if needed to execute some
     * setup before Looper loops.
     */
    protected void onLooperPrepared() {
    }

    @Override
    public void run() {
        mTid = Process.myTid();
        Looper.prepare();
        synchronized (this) {
            mLooper = Looper.myLooper();
            notifyAll();
        }
        Process.setThreadPriority(mPriority);
        onLooperPrepared();
        Looper.loop();
        mTid = -1;
    }
    
    /**
     * This method returns the Looper associated with this thread. If this thread not been started
     * or for any reason is isAlive() returns false, this method will return null. If this thread 
     * has been started, this method will block until the looper has been initialized.  
     * @return The looper.
     */
    public Looper getLooper() {
        if (!isAlive()) {
            return null;
        }
        
        // If the thread has been started, wait until the looper has been created.
        synchronized (this) {
            while (isAlive() && mLooper == null) {
                try {
                    wait();
                } catch (InterruptedException e) {
                }
            }
        }
        return mLooper;
    }

    /**
     * Quits the handler thread's looper.
     * <p>
     * Causes the handler thread's looper to terminate without processing any
     * more messages in the message queue.
     * </p><p>
     * Any attempt to post messages to the queue after the looper is asked to quit will fail.
     * For example, the {@link Handler#sendMessage(Message)} method will return false.
     * </p><p class="note">
     * Using this method may be unsafe because some messages may not be delivered
     * before the looper terminates.  Consider using {@link #quitSafely} instead to ensure
     * that all pending work is completed in an orderly manner.
     * </p>
     *
     * @return True if the looper looper has been asked to quit or false if the
     * thread had not yet started running.
     *
     * @see #quitSafely
     */
    public boolean quit() {
        Looper looper = getLooper();
        if (looper != null) {
            looper.quit();
            return true;
        }
        return false;
    }

    /**
     * Quits the handler thread's looper safely.
     * <p>
     * Causes the handler thread's looper to terminate as soon as all remaining messages
     * in the message queue that are already due to be delivered have been handled.
     * Pending delayed messages with due times in the future will not be delivered.
     * </p><p>
     * Any attempt to post messages to the queue after the looper is asked to quit will fail.
     * For example, the {@link Handler#sendMessage(Message)} method will return false.
     * </p><p>
     * If the thread has not been started or has finished (that is if
     * {@link #getLooper} returns null), then false is returned.
     * Otherwise the looper is asked to quit and true is returned.
     * </p>
     *
     * @return True if the looper looper has been asked to quit or false if the
     * thread had not yet started running.
     */
    public boolean quitSafely() {
        Looper looper = getLooper();
        if (looper != null) {
            looper.quitSafely();
            return true;
        }
        return false;
    }

    /**
     * Returns the identifier of this thread. See Process.myTid().
     */
    public int getThreadId() {
        return mTid;
    }
}

可以看出，定义一个HandlerThread对象需要new出来，

    public HandlerThread(String name) {
        super(name);
        mPriority = Process.THREAD_PRIORITY_DEFAULT;
    }
    
    /**
     * Constructs a HandlerThread.
     * @param name
     * @param priority The priority to run the thread at. The value supplied must be from 
     * {@link android.os.Process} and not from java.lang.Thread.
     */
    public HandlerThread(String name, int priority) {
        super(name);
        mPriority = priority;
    }

因为它本身是一个Thread，所以如果要该线程跑起来，需要手动调用start()方法，当调用start方法的时候就会执行Thread的run()方法，

 @Override
    public void run() {
        mTid = Process.myTid();
        Looper.prepare();
        synchronized (this) {
            mLooper = Looper.myLooper();
            notifyAll();
        }
        Process.setThreadPriority(mPriority);
        onLooperPrepared();
        Looper.loop();
        mTid = -1;
    }

可以看到内部调用了Looper.prepare()方法和Loop.loop()方法，在调用Looper.loop()方法之前调用了一个空的实现方法：onLooperPrepared(),我们可以实现自己的onLooperPrepared（）方法，做一些Looper的初始化操作；run方法里面当mLooper创建完成后有个notifyAll()，getLooper()中有个wait()，这是为什么呢？因为的mLooper在一个线程中执行，而我们的handler是在UI线程初始化的，也就是说，我们必须等到mLooper创建完成，才能正确的返回getLooper();wait(),notify()就是为了解决这两个线程的同步问题

 

   /**
     * This method returns the Looper associated with this thread. If this thread not been started
     * or for any reason is isAlive() returns false, this method will return null. If this thread 
     * has been started, this method will block until the looper has been initialized.  
     * @return The looper.
     */
    public Looper getLooper() {
        if (!isAlive()) {
            return null;
        }
        
        // If the thread has been started, wait until the looper has been created.
        synchronized (this) {
            while (isAlive() && mLooper == null) {
                try {
                    wait();
                } catch (InterruptedException e) {
                }
            }
        }
        return mLooper;
    }

HandlerThread的使用可以参考IntentService的使用。

 

 

使用场景：

HandlerThread 所做的就是在新开的子线程中创建了 Looper，那它的使用场景就是 Thread + Looper 使用场景的结合，即：在子线程中执行耗时的、可能有多个任务的操作。

总结：

1.HandlerThread本质上是一个Thread，内部创建了该线程的Looper，

2.HandlerThread我们不但可以实现UI线程与子线程的通信同样也可以实现子线程与子线程之间的通信。