基本用法
ES6 允许使用“箭头”(=>)定义函数。
var f = v => v;
上面的箭头函数等于:
var f = function(v) {
return v;
};
如果箭头函数不需要参数或者需要多个参数,就使用一个圆括号代表参数的部分。
var f = () => 5;
// 等同于
var f = function () { return 5 };
var sum = (num1, num2) => num1 + num2;
// 等同于
var sum = function(num1, num2) {
return num1 + num2;
};
如果箭头函数的代码块部分多于一条语句,就要使用大括号将它们括起来,并且使用 return 语句返回。
var sum = (num1, num2) => { return num1 + num2; }
由于大括号被解析为代码块,所以如果箭头函数直接返回一个对象,必选在对象外面加上大括号,否则会报错。
// 报错
let getTempItem = id => { id: id, name: "Temp" };
// 不报错
let getTempItem = id => ({ id: id, name: "Temp" });
如果箭头函数只有一行语句,且不需要返回值,可以采用下面的写法,就不用写大括号了。
let fn = () => void doesNotReturn();
箭头函数可以与变量解构结合使用。
const full = ({ first, last }) => first + ' ' + last;
// 等同于
function full(person) {
return person.first + ' ' + person.last;
}
箭头函数使得表达更简洁。
const isEven = n => n % 2 == 0;
const square = n => n * n;
上面代码只用了两行,就定义了两个简单的工具函数。如果不用箭头函数,可能就要占用多行,而且还不如这样写醒目。
箭头函数的一个用处是简化回调函数。
// 正常函数写法
[1,2,3].map(function (x) {
return x * x;
});
// 箭头函数写法
[1,2,3].map(x => x * x);
另外一个例子
// 正常函数写法
var result = values.sort(function (a, b) {
return a - b;
});
// 箭头函数写法
var result = values.sort((a, b) => a - b);
下面是 rest 参数与箭头函数结合的例子。
const numbers = (...nums) => nums;
numbers(1, 2, 3, 4, 5)
// [1,2,3,4,5]
const headAndTail = (head, ...tail) => [head, tail];
headAndTail(1, 2, 3, 4, 5)
// [1,[2,3,4,5]]
使用注意点
1)函数体内的 this 对象,就是定义时所在的对象,而不是使用时所在的对象。
2)不可以当作构造函数,也就是说,不可以使用 new 命令,否则会抛出一个错误。
3)不可以使用 arguments 对象,改对象在函数体内不存在。如果要使用,可以用 rest 参数代替。
4)不可以使用 yield 命令,因此箭头函数不能用作 Generator 函数。
上面四点中,尤其第一点值得注意,this 的指向是可变的,但是在箭头函数中,它是固定的。
function foo() {
setTimeout(() => {
console.log('id:', this.id);
}, 100);
}
var id = 1;
foo.call({ id: 2 });
// id: 2
上面代码中,setTimeout 的参数是一个箭头函数,这个箭头函数的定义生效是在 foo 函数生效时,而它的真正执行时,而它的真正执行要等到 100 毫秒。如果是普通函数,执行时 this 应该指向全局对象 window,这时应该输出 1。但是,箭头函数导数 this 总是指向函数定义生效时所在的对象(上面是 {id:2}),所以输出的是 2。
箭头函数可以让 setTimeout 里面的 this,绑定定义时所在的作用域,而不死指向运行时所在的作用域。下面是另一个例子。
function Timer() {
this.s1 = 0;
this.s2 = 0;
// 箭头函数
setInterval(() => this.s1++, 1000);
// 普通函数
setInterval(function () {
this.s2++;
}, 1000);
}
var timer = new Timer();
setTimeout(() => console.log('s1: ', timer.s1), 3000);
setTimeout(() => console.log('s2: ', timer.s2), 3000);
// s1: 3
// s2: 0
上面代码中,Timer 函数内部设置了两个计时器,分别饰演箭头函数和普通函数。前者的 this 绑定定义时所在的作用域(即Timer函数),后者的 this 指向运行时所在的作用域(即全局对象)。所以,3000毫秒之后,timer.s1 被更新了3次,而 timer.s2 一次都没更新。
箭头函数可以让 this 指向固定化,这种特性有利于封装回调函数。下面是一个例子,DOM 事件的回调函数封装在一个对象里面。
var handler = {
id: '123456',
init: function() {
document.addEventListener('click',
event => this.doSomething(event.type), false);
},
doSomething: function(type) {
console.log('Handling ' + type + ' for ' + this.id);
}
};
上面代码的 init 方法中,使用了箭头函数,这导致这个箭头函数里面的 this,总是指向 handler 对象。否则,回调函数运行时,this.doSomething 这一行会报错,因为此时 this 指向 document 对象。
this 指向的固定化,并不是因为箭头函数内部又绑定 this 的机制,实际原因是箭头韩式根本没有自己的 this,导致内部的 this 就是外层代码块的 this。正因为它没有 this,所以也就不能用作构造函数。
所以箭头函数转为 ES5 的代码如下。
// ES6
function foo() {
setTimeout(() => {
console.log('id:', this.id);
}, 100);
}
// ES5
function foo() {
var _this = this;
setTimeout(function () {
console.log('id:', _this.id);
}, 100);
}
上面代码中,转换后的 ES5 版本清楚地说明了,箭头函数里面根本没有自己的 this,而是引用外层的 this。
看看下面的代码有几个 this。
function foo() {
return () => {
return () => {
return () => {
console.log('id:', this.id);
};
};
};
}
var f = foo.call({id: 1});
var t1 = f.call({id: 2})()(); // id: 1
var t2 = f().call({id: 3})(); // id: 1
var t3 = f()().call({id: 4}); // id: 1
上面代码中只有一个 this,就是函数 foo 的 this,所以 t1、t2、t3 都输出同样的结果。因为所有的内层函数都是箭头函数,都没有自己的 this,它们的 this 其实都是最外层的 foo 函数的 this。
除了 this,以下三个变量在箭头函数之中也是不存在的,指向外层函数的对应变量:arguments、super、new.target。
function foo() {
setTimeout(() => {
console.log('args:', arguments);
}, 100);
}
foo(2, 4, 6, 8)
// args: [2, 4, 6, 8]
上面代码中,箭头函数内部的变量 arguments,其实是函数 foo 的 arguments 变量。
另外箭头函数没有自己的 this,搜易当然也就不能用 call()、apply()、bind() 这些方法去改变 this 的指向。
(function() {
return [
(() => this.x).bind({ x: 'inner' })()
];
}).call({ x: 'outer' });
// ['outer']
上面代码中,箭头函数没有自己的 this,所以 bind 方法无效,内部的 this 指向外部的 this。
JavaScript 的 this 对象一直是一个令人头疼的问题,因此在对象中使用 this 要非常小心,箭头函数“绑定” this,很大程度上解决了这个困扰。
嵌套的箭头函数
箭头函数内部,还可以再使用箭头函数。下面是一个 ES5 语法的多重嵌套函数。
function insert(value) {
return {into: function (array) {
return {after: function (afterValue) {
array.splice(array.indexOf(afterValue) + 1, 0, value);
return array;
}};
}};
}
insert(2).into([1, 3]).after(1); //[1, 2, 3]
使用箭头函数改写:
let insert = (value) => ({into: (array) => ({after: (afterValue) => {
array.splice(array.indexOf(afterValue) + 1, 0, value);
return array;
}})});
insert(2).into([1, 3]).after(1); //[1, 2, 3]
下面是一个部署管道机制(pipeline)的例子,即前一个函数的输出最后一个函数的输入。
const pipeline = (...funcs) =>
val => funcs.reduce((a, b) => b(a), val);
const plus1 = a => a + 1;
const mult2 = a => a * 2;
const addThenMult = pipeline(plus1, mult2);
addThenMult(5)
// 12
为增强可读性,可以采用下面写法:
const plus1 = a => a + 1;
const mult2 = a => a * 2;
mult2(plus1(5))
// 12
箭头函数还有一个功能,就是可以和方便地改写 λ 演算。
// λ演算的写法
fix = λf.(λx.f(λv.x(x)(v)))(λx.f(λv.x(x)(v)))
// ES6的写法
var fix = f => (x => f(v => x(x)(v)))
(x => f(v => x(x)(v)));