unix环境中，百万级数据量参数配置

1、操作系统版本要求

Suse Linux Enterprise Server 11, SP1, x86_64

2、修改内核网络参数 （注意：使用dmesg命令查看日志，动态修改）

vi /etc/sysctrl.conf

fs.inotify.max_user_watches = 2000000

fs.nr_open = 2000000

fs.file-max = 2000000

net.core.rmem_default = 1048576

net.core.wmem_default = 1048576

net.core.rmem_max = 8388608

net.core.wmem_max = 8388608

net.core.netdev_max_backlog = 3000

net.core.somaxconn = 256

net.ipv4.tcp_tw_recycle = 1

net.ipv4.tcp_tw_reuse = 1

net.ipv4.tcp_fin_timeout = 2

net.ipv4.tcp_max_tw_buckets = 1000

net.ipv4.tcp_rmem = 4096 1048576 8388608

net.ipv4.tcp_wmem = 4096 1048576 8388608

net.ipv4.tcp_timestamps = 0

net.ipv4.tcp_sack = 0

net.ipv4.tcp_no_metrics_save = 1

net.ipv4.tcp_keepalive_time = 1800

net.ipv4.tcp_keepalive_intvl = 30

net.ipv4.tcp_keepalive_probes = 3

net.ipv4.tcp_max_syn_backlog = 8192

net.ipv4.tcp_syncookies = 1

net.ipv4.tcp_window_scaling = 1

net.ipv4.icmp_echo_ignore_broadcasts = 1

net.ipv4.route.flush = 1

net.ipv4.conf.all.rp_filter = 1

net.ipv4.conf.default.promote_secondaries = 1

net.ipv4.conf.all.promote_secondaries = 1

net.ipv4.conf.all.arp_ignore = 2

net.ipv4.conf.default.arp_ignore = 2

net.ipv4.ip_local_port_range = 1024 65535

net.ipv4.conf.all.arp_ignore = 2

net.ipv4.conf.default.arp_announce = 1

net.ipv4.conf.all.arp_announce = 1

kernel.sysrq = 1

  

3、文件句柄修改 .目前只支持linux内核2.6.25之后（Suse11）

              sudo bash -c 'echo 1500000 > /proc/sys/fs/nr_open'

              vim /etc/security/limits.conf

              添加：

* soft nofile 1500000

                 *  hard nofile 1500000