解决CentOS 7 开机网络设备不启动方法

在VMware 11里新装一个CentOS 7系统，开机发现没有网络，于是ifconfig一下发现

eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        ether 00:0c:29:2b:c0:1e  txqueuelen 1000  (Ethernet)

        RX packets 1  bytes 138 (138.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 0  bytes 0 (0.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

        inet 127.0.0.1  netmask 255.0.0.0

        inet6 ::1  prefixlen 128  scopeid 0x10<host>

        loop  txqueuelen 0  (Local Loopback)

        RX packets 386  bytes 33512 (32.7 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 386  bytes 33512 (32.7 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

百度后发现是网卡没有启动

于是service network restart  显示

Restarting network (via systemctl):   [  OK  ]

再次查看网卡"ifconfig"，还是老样子

于是"ifup eno16777736"手动重启网卡，提示：

Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/0)  启动成功

再次查看网卡"ifconfig"，正常