centos7设置静态ip ⚪

最新推荐文章于 2022-11-16 15:11:38 发布

成长的⚪

最新推荐文章于 2022-11-16 15:11:38 发布

阅读量304

点赞数 1

分类专栏： centos7系统文章标签：网络设置 centos7

本文链接：https://blog.csdn.net/wyz1997/article/details/101016876

版权

centos7系统专栏收录该内容

4 篇文章 0 订阅

订阅专栏

1、设置IP
使用vim编辑
编辑/etc/sysconfig/network-scripts/ifcfg-eno16777736

[root@ ]# vi /etc/sysconfig/network-scripts/ifcfg-eno16777736
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=eno16777736
UUID=49886bac-80b9-432a-81a8-7cf7ccdd6d1f
DEVICE=eno16777736
ONBOOT=yes
IPADDR=192.168.40.190
NETMASK=255.255.255.0
GATEWAY=192.168.40.2
DNS1=202.102.134.68

ONBOOT更改为yes
BOOTPROTO更改为static
添加：
IPADDR
NETMASK
GATEWAY
DNS1
更改完毕后重启网络使设置生效。

[root@ ]# service network restart

2、使用ip a命令查看

[root@ ]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:4c:90:01 brd ff:ff:ff:ff:ff:ff
    inet 192.168.40.190/24 brd 192.168.40.255 scope global eno16777736
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe4c:9001/64 scope link 
       valid_lft forever preferred_lft forever

3、修改防火墙。
查看防火墙systemctl status firewalld
启动防火墙systemctl start firewalld
临时关闭防火墙systemctl stop firewalld
永久关闭防火墙systemctl disable firewalld