This group will start 100 threads - 设置单台负载机,线程组启动的线程总数为100个
First,wait for n seconds - 启动第一个线程之前,需要等待0秒,也就是不等待直接启动线程
Then start 0 threads - 设置最开始启动0个线程
Next,add 10 threads every 30 threads,using ramp-up 5 seconds - 每隔30秒,在5秒内启动10个线程
Then hold load for 60 seconds - 单台负载机启动的线程总数达到100个,持续运行60秒
Finally,stop 5 threads every 1 seconds - 最后每隔1秒,停止5个线程数