debian系统配置ip地址

debian系统配置ip地址


在Debian中网卡的设置可以通过/etc/network/interfaces文件来进行,具体可分为三种不同的配置方式:DHCP自动获取、静态分配IP地址和PPPoE宽带拨号。

具体设置如下: 在进行配置之前,首先进入/etc/network目录中,用nano命令编辑interfaces文件:

网卡通过DHCP自动获取IP地址

代码:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

#
# The loopback network interface(配置环回口)

# 开机自动激lo接口
auto lo
# 配置lo接口为环回口
iface lo inet loopback

#
# The primary network interface (配置主网络接口)

#开机自动激活eth0接口
auto eth0
#配置eth0接口为DHCP自动获取
iface eth0 inet dhcp
网卡静态分配IP地址

代码:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

#
# The loopback network interface(配置环回口)

# 开机自动激lo接口
auto lo
# 配置lo接口为环回口
iface lo inet loopback

#
# The primary network interface (配置主网络接口)

#开机自动激活eth0接口
auto eth0
#配置eth0接口为静态设置IP地址
iface eth0 inet static
address 10.16.3.99
netmask 255.255.255.0
network 10.16.3.0
broadcast 10.16.3.255
gateway 10.16.3.1

#单网卡配置多个ip,设置第二个ip地址

auto eth0:1

iface eth0:1 inet static
address x.x.x.x
netmask 255.255.255.0
network 10.16.3.0
broadcast 10.16.3.255
gateway 10.16.3.1

# dns-* options are implemented by the resolvconf package, if installed(DNS设置)
dns-nameservers 61.153.177.196 61.153.177.197
dns-search feelnet.org
配置好后推出编辑/etc/resolv.conf,配置DNS,加入以下信息:

代码:
nameserver 219.146.0.130
配置完毕后,重启计算机或网络服务即可将网卡配好。如进行PPPoE宽带拨号,可运行pppoeconf命令进行配置。
__________________
  • 1
    点赞
  • 3
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值