常用到的网络分析工具命令很多,比如:nestat、ss、ip、sar、netstat等。这里我主要介绍下我使用最多的两个:netstat和sar。
1.netstat
/本来是想着自己写的,但是在网上发现了一片写得炒鸡好,很全很详细的文章。我还要写吗!- -。直接拿过来用嘛。/
netstat命令很强大。用man一下netstat,可以看到,Netstat 命令用于显示各种网络相关信息,如网络连接,路由表,接口状态 (Interface Statistics),masquerade 连接,多播成员 (Multicast Memberships) 等等。
常见参数
-a (all)显示所有选项,默认不显示LISTEN相关
-t (tcp)仅显示tcp相关选项
-u (udp)仅显示udp相关选项
-n 拒绝显示别名,能显示数字的全部转化成数字。
-l 仅列出有在 Listen (监听) 的服務状态
-p 显示建立相关链接的程序名
-r 显示路由信息,路由表
-e 显示扩展信息,例如uid等
-s 按各个协议进行统计
-c 每隔一个固定时间,执行该netstat命令。
提示:LISTEN和LISTENING的状态只有用-a或者-l才能看到
使用实例:
- 列出所有端口 (包括监听和未监听的)
列出所有端口 netstat -a
netstat -a | more
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 : LISTEN
udp 0 0 :bootpc :*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 6135 /tmp/.X11-unix/X0
unix 2 [ ACC ] STREAM LISTENING 5140 /var/run/acpid.socket
列出所有 tcp 端口 netstat -at
netstat -at
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 *:* LISTEN
tcp 0 0 localhost:ipp *:* LISTEN
tcp 0 0 *:smtp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
列出所有 udp 端口 netstat -au
netstat -au
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 *:bootpc *:*
udp 0 0 *:49119 *:*
udp 0 0 *:mdns *:*
- 列出所有处于监听状态的 Sockets
只显示监听端口 netstat -l
netstat -l
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:ipp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
udp 0 0 *:49119 *:*
只列出所有监听 tcp 端口 netstat -lt
netstat -lt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:30037 *:* LISTEN
tcp 0 0 *:smtp *:* LISTEN
tcp6 0 0 localhost:ipp [::]:* LISTEN
只列出所有监听 udp 端口 netstat -lu
netstat -lu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp 0 0 *:49119 *:*
udp 0 0 *:mdns *:*
只列出所有监听 UNIX 端口 netstat -lx
netstat -lx
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 6294 private/maildrop
unix 2 [ ACC ] STREAM LISTENING 6203 public/cleanup
unix 2 [ ACC ] STREAM LISTENING 6302 private/ifmail
unix 2 [ ACC ] STREAM LISTENING 6306 private/bsmtp
- 显示每个协议的统计信息
显示所有端口的统计信息 netstat -s
netstat -s
Ip:
11150 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
11149 incoming packets delivered
11635 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
Tcp:
582 active connections openings
2 failed connection attempts
25 connection resets received
Udp:
1183 packets received
4 packets to unknown port received.
.....
显示 TCP 或 UDP 端口的统计信息 netstat -st 或 -su
netstat -st
netstat -su
- 在 netstat 输出中显示 PID 和进程名称 netstat -p
netstat -p 可以与其它开关一起使用,就可以添加 “PID/进程名称” 到 netstat 输出中,这样 debugging 的时候可以很方便的发现特定端口运行的程序。
netstat -pt
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 1 0 ramesh-laptop.loc:47212 192.168.185.75:www CLOSE_WAIT 2109/firefox
tcp 0 0 ramesh-laptop.loc:52750 lax:www ESTABLISHED 2109/firefox
- 在 netstat 输出中不显示主机,端口和用户名 (host, port or user)
当你不想让主机,端口和用户名显示,使用 netstat -n。将会使用数字代替那些名称。
同样可以加速输出,因为不用进行比对查询。
netstat -an
如果只是不想让这三个名称中的一个被显示,使用以下命令
netsat -a –numeric-ports
netsat -a –numeric-hosts
netsat -a –numeric-users
- 持续输出 netstat 信息
netstat 将每隔一秒输出网络信息。
netstat -c
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 ramesh-laptop.loc:36130 101-101-181-225.ama:www ESTABLISHED
tcp 1 1 ramesh-laptop.loc:52564 101.11.169.230:www CLOSING
tcp 0 0 ramesh-laptop.loc:43758 server-101-101-43-2:www ESTABLISHED
tcp 1 1 ramesh-laptop.loc:42367 101.101.34.101:www CLOSING
^C
- 显示系统不支持的地址族 (Address Families)
netstat –verbose
在输出的末尾,会有如下的信息
netstat: no support for `AF IPX' on this system.
netstat: no support for `AF AX25' on this system.
netstat: no support for `AF X25' on this system.
netstat: no support for `AF NETROM' on this system.
- 显示核心路由信息 netstat -r
netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth2
link-local * 255.255.0.0 U 0 0 0 eth2
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth2
注意: 使用 netstat -rn 显示数字格式,不查询主机名称。
- 找出程序运行的端口
并不是所有的进程都能找到,没有权限的会不显示,使用 root 权限查看所有的信息。
netstat -ap | grep ssh
tcp 1 0 dev-db:ssh 101.174.100.22:39213 CLOSE_WAIT -
tcp 1 0 dev-db:ssh 101.174.100.22:57643 CLOSE_WAIT -
找出运行在指定端口的进程
netstat -an | grep ‘:80’
- 显示网络接口列表
netstat -i
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0 1500 0 0 0 0 0 0 0 0 0 BMU
eth2 1500 0 26196 0 0 0 26883 6 0 0 BMRU
lo 16436 0 4 0 0 0 4 0 0 0 LRU
显示详细信息,像是 ifconfig 使用 netstat -ie:
netstat -ie
Kernel Interface table
eth0 Link encap:Ethernet HWaddr 00:10:40:11:11:11
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:f6ae0000-f6b00000
- IP和TCP分析
查看连接某服务端口最多的的IP地址
wss8848@ubuntu:~$ netstat -nat | grep "192.168.1.15:22" |awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -nr|head -20
18 221.136.168.36
3 154.74.45.242
2 78.173.31.236
2 62.183.207.98
2 192.168.1.14
2 182.48.111.215
2 124.193.219.34
2 119.145.41.2
2 114.255.41.30
1 75.102.11.99
TCP各种状态列表
wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'
established)
Foreign
LISTEN
TIME_WAIT
ESTABLISHED
TIME_WAIT
SYN_SENT
先把状态全都取出来,然后使用uniq -c统计,之后再进行排序。
wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'|sort|uniq -c
143 ESTABLISHED
1 FIN_WAIT1
1 Foreign
1 LAST_ACK
36 LISTEN
6 SYN_SENT
113 TIME_WAIT
1 established)
最后的命令如下:
netstat -nat |awk '{print $6}'|sort|uniq -c|sort -rn
分析access.log获得访问前10位的ip地址
awk '{print $1}' access.log |sort|uniq -c|sort -nr|head -10
上诉内容来源:http://www.cnblogs.com/ggjucheng/archive/2012/01/08/2316661.html 作者:hellodev
2.sar
用yum安装sar
yum install sysstat
命令介绍
sar --help
Usage: sar [ options ] [ <interval> [ <count> ] ]
Options are:
[ -A ] [ -b ] [ -B ] [ -C ] [ -d ] [ -h ] [ -m ] [ -p ] [ -q ] [ -r ] [ -R ]
[ -S ] [ -t ] [ -u [ ALL ] ] [ -v ] [ -V ] [ -w ] [ -W ] [ -y ]
[ -I { <int> [,...] | SUM | ALL | XALL } ] [ -P { <cpu> [,...] | ALL } ]
[ -j { ID | LABEL | PATH | UUID | ... } ] [ -n { <keyword> [,...] | ALL } ]
[ -o [ <filename> ] | -f [ <filename> ] ] [ --legacy ]
[ -i <interval> ] [ -s [ <hh:mm:ss> ] ] [ -e [ <hh:mm:ss> ] ]
sar工具其实功能很强大,可以监控系统包括cpu、内存交换、io等。这里仅仅介绍sar的网卡流量分析功能。
命令参数
sar -n { DEV | EDEV | NFS | NFSD | SOCK | ALL }
-n 选项提供了6个keyword,DEV显示网络接口信息,EDEV显示关于网络错误的统计数据,NFS统计活动的NFS客户端的信息,NFSD统计NFS服务器的信息,SOCK显示套接字信息,ALL显示所有5个开关。
命令实例:
sar -n DEV 2 5
sar -n DEV 2 5
Linux 2.6.32-573.el6.x86_64 (localhost.localdomain) 08/29/2016 _x86_64_ (4 CPU)
10:24:08 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:10 AM lo 109.55 109.55 81.09 81.09 0.00 0.00 0.00
10:24:10 AM eth0 112.06 113.07 30.39 50.48 0.00 0.00 0.00
10:24:10 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:12 AM lo 117.09 117.09 59.64 59.64 0.00 0.00 0.00
10:24:12 AM eth0 106.53 114.57 31.69 36.24 0.00 0.00 0.00
10:24:12 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:14 AM lo 109.00 109.00 79.03 79.03 0.00 0.00 0.00
10:24:14 AM eth0 132.00 123.50 34.79 50.68 0.00 0.00 0.00
10:24:14 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:16 AM lo 112.63 112.63 75.90 75.90 0.00 0.00 0.00
10:24:16 AM eth0 124.24 121.21 30.92 48.06 0.00 0.00 0.00
10:24:16 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
10:24:18 AM lo 132.83 132.83 84.30 84.30 0.00 0.00 0.00
10:24:18 AM eth0 144.44 147.47 39.83 50.73 0.00 0.00 0.00
Average: IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s
Average: lo 116.20 116.20 75.99 75.99 0.00 0.00 0.00
Average: eth0 123.84 123.94 33.52 47.24 0.00 0.00 0.00
IFACE:LAN接口
rxpck/s:每秒钟接收的数据包
txpck/s:每秒钟发送的数据包
rxbyt/s:每秒钟接收的字节数
txbyt/s:每秒钟发送的字节数
rxcmp/s:每秒钟接收的压缩数据包
txcmp/s:每秒钟发送的压缩数据包
rxmcst/s:每秒钟接收的多播数据包
sar -n EDEV 2 10
Linux 2.6.32-573.el6.x86_64 (localhost.localdomain) 08/29/2016 _x86_64_ (4 CPU)
10:25:24 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:26 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:26 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:26 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:28 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:28 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:28 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:30 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:30 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:30 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:32 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:32 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:32 AM IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
10:25:34 AM lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
10:25:34 AM eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Average: IFACE rxerr/s txerr/s coll/s rxdrop/s txdrop/s txcarr/s rxfram/s rxfifo/s txfifo/s
Average: lo 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Average: eth0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
IFACE:LAN接口
rxerr/s:每秒钟接收的坏数据包
txerr/s:每秒钟发送的坏数据包
coll/s:每秒冲突数
rxdrop/s:因为缓冲充满,每秒钟丢弃的已接收数据包数
txdrop/s:因为缓冲充满,每秒钟丢弃的已发送数据包数
txcarr/s:发送数据包时,每秒载波错误数
rxfram/s:每秒接收数据包的帧对齐错误数
rxfifo/s:接收的数据包每秒FIFO过速的错误数
txfifo/s:发送的数据包每秒FIFO过速的错误数
sar -n SOCK 2 10
Linux 2.6.32-573.el6.x86_64 (localhost.localdomain) 08/29/2016 _x86_64_ (4 CPU)
10:34:48 AM totsck tcpsck udpsck rawsck ip-frag tcp-tw
10:34:50 AM 338 153 17 0 0 1100
10:34:52 AM 339 154 17 0 0 1128
10:34:54 AM 337 150 18 0 0 1153
10:34:56 AM 338 151 17 0 0 1168
10:34:58 AM 339 152 17 0 0 1189
Average: 338 152 17 0 0 1148
totsck:使用的套接字总数量
tcpsck:使用的TCP套接字数量
udpsck:使用的UDP套接字数量
rawsck:使用的raw套接字数量
ip-frag:使用的IP段数量