【TeeChart Pro ActiveX教程】（十三）：图表面板上的自定义绘图（下）

最新推荐文章于 2020-12-15 19:47:03 发布

xiaochuachua

最新推荐文章于 2020-12-15 19:47:03 发布

阅读量244

点赞数

分类专栏：产品文章标签： Teechart Steema 图表图表教程

产品专栏收录该内容

380 篇文章 9 订阅

订阅专栏

下载TeeChart Pro ActiveX最新版本

添加2D形状

以与Canvas Lines类似的方式添加Canvas Shapes。以下示例在图表区域的中心添加一个Rectangle：

2D图表

2D图表仅支持2D形状。

[C＃]

private void tChart1_AfterDraw（object sender，Steema.TeeChart.Drawing.Graphics3D g）{ 
        Size s = new Size（100,100）; 
        Point l = new Point（g.ChartXCenter  - （s.Width / 2），g.ChartYCenter  - （s.Height / 2））; 
        Rectangle r = new Rectangle（l，s）; 
        g.Pen.Color = Color.Aquamarine; 
        g.Brush.Color = Color.Blue; 
        g.Rectangle（R）; 
}

[VB.Net]

Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        Dim S As New Size(100, 100) 
        Dim L As New Point(g.ChartXCenter - (S.Width / 2), g.ChartYCenter - (S.Height / 2)) 
        Dim R As New Rectangle(L, S) 
        g.Pen.Color = Color.Aquamarine 
        g.Brush.Color = Color.Blue 
        g.Rectangle(R) 
End Sub

3D图表

在3D图表上，您也可以在Z平面中移动矩形。请参阅RectangleWithZ方法。此示例将矩形放置在左侧墙壁上，但将其移向图表后部的中间位置（朝向后墙）。

[C#]

private void Form1_Load(object sender, System.EventArgs e) { 
        point3DSeries1.LinePen.Visible = false; 
        point3DSeries1.FillSampleValues(20); 
        point3DSeries1.VertAxis = VerticalAxis.Both; 
        point3DSeries1.HorizAxis = HorizontalAxis.Both; 
        tChart1.Aspect.Chart3DPercent = 50; 
        tChart1.Axes.Depth.Visible = true; 
} 
 
private void tChart1_AfterDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
        Size s = new Size(100,100); 
        Point l = new Point(tChart1.Axes.Left.Position, g.ChartYCenter - (s.Height / 2)); 
        Rectangle r = new Rectangle(l,s); 
        g.Pen.Color = Color.Aquamarine; 
        g.Brush.Color = Color.Blue; 
        g.Rectangle(r, tChart1.Aspect.Width3D/2); 
}

[VB.Net]

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 
        Point3DSeries1.LinePen.Visible = False 
        Point3DSeries1.FillSampleValues(20) 
        Point3DSeries1.VertAxis = Steema.TeeChart.VerticalAxis.Both 
        Point3DSeries1.HorizAxis = Steema.TeeChart.HorizontalAxis.Both 
        TChart1.Aspect.Chart3DPercent = 50 
        TChart1.Axes.Depth.Visible = True 
End Sub 
 
Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        Dim S As New Size(100, 100) 
        Dim L As New Point(TChart1.Axes.Left.Position, g.ChartYCenter - (S.Height / 2)) 
        Dim R As New Rectangle(L, S) 
        g.Pen.Color = Color.Aquamarine 
        g.Brush.Color = Color.Blue 
        g.Rectangle(R, TChart1.Aspect.Width3D / 2) 
End Sub

添加3D形状

您可以将3D形状添加到3D图表中。此示例在Chart矩形的中间绘制一个Cube：

[C＃]

private void Form1_Load(object sender, System.EventArgs e) { 
        point3DSeries1.LinePen.Visible = false; 
        point3DSeries1.FillSampleValues(20); 
        tChart1.Aspect.Chart3DPercent = 50; 
        tChart1.Legend.Visible = false; 
        tChart1.Axes.Depth.Visible = true; 
} 
 
private void tChart1_AfterDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
        Size s = new Size(50,50); 
        Point p = new Point(g.ChartXCenter - (s.Width/2), g.ChartYCenter - (s.Height/2)); 
        Rectangle r = new Rectangle(p,s); 
        g.Cube(r, 0, 20, true); 
}

[VB.Net]

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 
        Point3DSeries1.LinePen.Visible = False 
        Point3DSeries1.FillSampleValues(20) 
        TChart1.Aspect.Chart3DPercent = 50 
        TChart1.Legend.Visible = False 
        TChart1.Axes.Depth.Visible = True 
End Sub 
 
Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        Dim S As New Size(50, 50) 
        Dim P As New Point(g.ChartXCenter - (S.Width / 2), g.ChartYCenter - (S.Height / 2)) 
        Dim R As New Rectangle(P, S) 
        g.Cube(R, 0, 20, True) 
End Sub

添加文字

2D文本位置

将文本添加到最后一个矩形：

[C＃]

private void tChart1_AfterDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
        string text = "My Text"; 
        Size s = new Size(150, 50); 
        Point p = new Point(g.ChartXCenter - (s.Width/2), g.ChartYCenter - (s.Height/2)); 
        Rectangle r = new Rectangle(p,s); 
        g.Pen.Color = Color.Blue; 
        g.Rectangle(r); 
 
        g.TextOut(Convert.ToInt32(g.ChartXCenter - (g.TextWidth(text)/2)), Convert.ToInt32(g.ChartYCenter - (g.TextHeight(text)/2)), text); 
}

[VB.Net]

Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        Dim Text As String = "My Text" 
        Dim S As New Size(50, 50) 
        Dim P As New Point(g.ChartXCenter - (S.Width / 2), g.ChartYCenter - (S.Height / 2)) 
        Dim R As New Rectangle(P, S) 
        g.Pen.Color = Color.Blue 
        g.Rectangle(R) 
 
        g.TextOut(Convert.ToInt32(g.ChartXCenter - (g.TextWidth(Text) / 2)), Convert.ToInt32(g.ChartYCenter - (g.TextHeight(Text) / 2)), Text) 
End Sub

3D文字位置

通过使用带有az坐标的TextOut重载，可以将文本放置在不同的3D平面中。

[c#]

private void Form1_Load(object sender, System.EventArgs e) { 
        point3DSeries1.FillSampleValues(20); 
        point3DSeries1.LinePen.Visible = false; 
        tChart1.Aspect.Chart3DPercent = 50; 
} 
 
private void tChart1_AfterDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
        string text = "My Text"; 
        g.TextOut(g.ChartXCenter, g.ChartYCenter, tChart1.Aspect.Width3D / 2, text); 
}

[VB.Net]

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 
        Point3DSeries1.FillSampleValues(20) 
        Point3DSeries1.LinePen.Visible = False 
        TChart1.Aspect.Chart3DPercent = 50 
End Sub 
 
Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        Dim Text As String = "My Text" 
        g.TextOut(g.ChartXCenter, g.ChartYCenter, TChart1.Aspect.Width3D / 2, Text) 
End Sub

应用示例

此示例获取系列的第3和第10个值，在它们之间绘制一条直线，并告诉我们新线的第一个和最后一个点的值以及它们之间的差异：

[c#]

private void Form1_Load(object sender, System.EventArgs e) { 
        tChart1.Aspect.View3D = false; 
        line1.FillSampleValues(20); 
} 
 
private void tChart1_AfterDraw(object sender, Steema.TeeChart.Drawing.Graphics3D g) { 
        if(tChart1.Series.Count > 0){ 
            if(tChart1.Series[0].Count > 10) { 
                Series s = tChart1.Series[0]; 
                int h = Convert.ToInt32(g.TextHeight("H")); 
                Point p1 = new Point(s.CalcXPos(3), s.CalcYPos(3)); 
                Point p2 = new Point(s.CalcXPos(10), s.CalcYPos(10)); 
                g.Pen.Color = Color.Blue; 
                g.Pen.Width = 2; 
                g.Pen.Style = System.Drawing.Drawing2D.DashStyle.Dash; 
                g.MoveTo(p1); 
                g.LineTo(p2, 0); 
                g.TextOut(p1.X, p1.Y - h, "Point value: " + s.YValues[3].ToString()); 
                g.TextOut(p2.X, p2.Y, "Point value: " + s.YValues[10].ToString()); 
                g.TextOut(p2.X, p2.Y + h, "Change is: " + Convert.ToString(s.YValues[3] - s.YValues[10])); 
            } 
        } 
}

[VB.Net]

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 
        TChart1.Aspect.View3D = False 
        Line1.FillSampleValues(20) 
End Sub 
 
Private Sub TChart1_AfterDraw(ByVal sender As Object, ByVal g As Steema.TeeChart.Drawing.Graphics3D) Handles TChart1.AfterDraw 
        If TChart1.Series.Count > 0 Then 
            If TChart1.Series(0).Count > 10 Then 
                Dim S As Steema.TeeChart.Series = TChart1.Series(0) 
                Dim H As Integer = Convert.ToInt32(g.TextHeight("H")) 
                Dim P1 As New Point(S.CalcXPos(3), S.CalcYPos(3)) 
                Dim P2 As New Point(S.CalcXPos(10), S.CalcYPos(10)) 
                g.Pen.Color = Color.Blue 
                g.Pen.Width = 2 
                g.Pen.Style = System.Drawing.Drawing2D.DashStyle.Dash 
                g.MoveTo(P1) 
                g.LineTo(P2, 0) 
                g.TextOut(P1.X, P1.Y - H, "Point value: " & S.YValues(3)) 
                g.TextOut(P2.X, P2.Y, "Point value: " & S.YValues(10)) 
                g.TextOut(P2.X, P2.Y + H, "Change is: " & (S.YValues(3) - S.YValues(10))) 
            End If 
        End If 
End Sub