Fabric2.3分布式部署(fabric-ca)

小青蛙呱呱跳

已于 2022-04-07 15:05:10 修改

阅读量6.5k

点赞数 1

分类专栏：区块链文章标签： fabric

于 2022-03-30 10:49:40 首次发布

本文链接：https://blog.csdn.net/xiaohanshasha/article/details/123838635

版权

区块链专栏收录该内容

9 篇文章 1 订阅

订阅专栏

1、前提

方法一：生成一下文件，可以把单机启动后的文件全部赋值过来。

方法二：直接利用docker-compose-ca.yaml启动fabric-ca容器，就会生成下列文件（orderer和peer）

创建组织及证书和 Fabric CA

配置3台服务器

IP	节点名称
192.168.31.8	orderer.example.com
192.168.31.70	peer0.org1.example.com
192.168.31.11	peer0.org2.example.com

在3台主机修改hosts文件

vim /etc/hosts

2、配置docker文件

编写创世块文件

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

---
################################################################################
#
#   Section: Organizations
#
#   - This section defines the different organizational identities which will
#   be referenced later in the configuration.
#
################################################################################
Organizations:

    # SampleOrg defines an MSP using the sampleconfig.  It should never be used
    # in production but may be used as a template for other definitions
    - &OrdererOrg
        # DefaultOrg defines the organization which is used in the sampleconfig
        # of the fabric.git development environment
        Name: OrdererOrg

        # ID to load the MSP definition as
        ID: OrdererMSP

        # MSPDir is the filesystem path which contains the MSP configuration
        MSPDir: ./organizations/ordererOrganizations/example.com/msp

        # Policies defines the set of policies at this level of the config tree
        # For organization policies, their canonical path is usually
        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
        Policies:
            Readers:
                Type: Signature
                Rule: "OR('OrdererMSP.member')"
            Writers:
                Type: Signature
                Rule: "OR('OrdererMSP.member')"
            Admins:
                Type: Signature
                Rule: "OR('OrdererMSP.admin')"

        OrdererEndpoints:
            - orderer.example.com:7050

    - &Org1
        # DefaultOrg defines the organization which is used in the sampleconfig
        # of the fabric.git development environment
        Name: Org1MSP

        # ID to load the MSP definition as
        ID: Org1MSP

        MSPDir: ./organizations/peerOrganizations/org1.example.com/msp

        # Policies defines the set of policies at this level of the config tree
        # For organization policies, their canonical path is usually
        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
        Policies:
            Readers:
                Type: Signature
                Rule: "OR('Org1MSP.admin', 'Org1MSP.peer', 'Org1MSP.client')"
            Writers:
                Type: Signature
                Rule: "OR('Org1MSP.admin', 'Org1MSP.client')"
            Admins:
                Type: Signature
                Rule: "OR('Org1MSP.admin')"
            Endorsement:
                Type: Signature
                Rule: "OR('Org1MSP.peer')"

    - &Org2
        # DefaultOrg defines the organization which is used in the sampleconfig
        # of the fabric.git development environment
        Name: Org2MSP

        # ID to load the MSP definition as
        ID: Org2MSP

        MSPDir: ./organizations/peerOrganizations/org2.example.com/msp

        # Policies defines the set of policies at this level of the config tree
        # For organization policies, their canonical path is usually
        #   /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
        Policies:
            Readers:
                Type: Signature
                Rule: "OR('Org2MSP.admin', 'Org2MSP.peer', 'Org2MSP.client')"
            Writers:
                Type: Signature
                Rule: "OR('Org2MSP.admin', 'Org2MSP.client')"
            Admins:
                Type: Signature
                Rule: "OR('Org2MSP.admin')"
            Endorsement:
                Type: Signature
                Rule: "OR('Org2MSP.peer')"

################################################################################
#
#   SECTION: Capabilities
#
#   - This section defines the capabilities of fabric network. This is a new
#   concept as of v1.1.0 and should not be utilized in mixed networks with
#   v1.0.x peers and orderers.  Capabilities define features which must be
#   present in a fabric binary for that binary to safely participate in the
#   fabric network.  For instance, if a new MSP type is added, newer binaries
#   might recognize and validate the signatures from this type, while older
#   binaries without this support would be unable to validate those
#   transactions.  This could lead to different versions of the fabric binaries
#   having different world states.  Instead, defining a capability for a channel
#   informs those binaries without this capability that they must cease
#   processing transactions until they have been upgraded.  For v1.0.x if any
#   capabilities are defined (including a map with all capabilities turned off)
#   then the v1.0.x peer will deliberately crash.
#
################################################################################
Capabilities:
    # Channel capabilities apply to both the orderers and the peers and must be
    # supported by both.
    # Set the value of the capability to true to require it.
    Channel: &ChannelCapabilities
        # V2_0 capability ensures that orderers and peers behave according
        # to v2.0 channel capabilities. Orderers and peers from
        # prior releases would behave in an incompatible way, and are therefore
        # not able to participate in channels at v2.0 capability.
        # Prior to enabling V2.0 channel capabilities, ensure that all
        # orderers and peers on a channel are at v2.0.0 or later.
        V2_0: true

    # Orderer capabilities apply only to the orderers, and may be safely
    # used with prior release peers.
    # Set the value of the capability to true to require it.
    Orderer: &OrdererCapabilities
        # V2_0 orderer capability ensures that orderers behave according
        # to v2.0 orderer capabilities. Orderers from
        # prior releases would behave in an incompatible way, and are therefore
        # not able to participate in channels at v2.0 orderer capability.
        # Prior to enabling V2.0 orderer capabilities, ensure that all
        # orderers on channel are at v2.0.0 or later.
        V2_0: true

    # Application capabilities apply only to the peer network, and may be safely
    # used with prior release orderers.
    # Set the value of the capability to true to require it.
    Application: &ApplicationCapabilities
        # V2_0 application capability ensures that peers behave according
        # to v2.0 application capabilities. Peers from
        # prior releases would behave in an incompatible way, and are therefore
        # not able to participate in channels at v2.0 application capability.
        # Prior to enabling V2.0 application capabilities, ensure that all
        # peers on channel are at v2.0.0 or later.
        V2_0: true

################################################################################
#
#   SECTION: Application
#
#   - This section defines the values to encode into a config transaction or
#   genesis block for application related parameters
#
################################################################################
Application: &ApplicationDefaults

    # Organizations is the list of orgs which are defined as participants on
    # the application side of the network
    Organizations:

    # Policies defines the set of policies at this level of the config tree
    # For Application policies, their canonical path is
    #   /Channel/Application/<PolicyName>
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"
        LifecycleEndorsement:
            Type: ImplicitMeta
            Rule: "MAJORITY Endorsement"
        Endorsement:
            Type: ImplicitMeta
            Rule: "MAJORITY Endorsement"

    Capabilities:
        <<: *ApplicationCapabilities
################################################################################
#
#   SECTION: Orderer
#
#   - This section defines the values to encode into a config transaction or
#   genesis block for orderer related parameters
#
################################################################################
Orderer: &OrdererDefaults

    # Orderer Type: The orderer implementation to start
    OrdererType: etcdraft
    
    # Addresses used to be the list of orderer addresses that clients and peers
    # could connect to.  However, this does not allow clients to associate orderer
    # addresses and orderer organizations which can be useful for things such
    # as TLS validation.  The preferred way to specify orderer addresses is now
    # to include the OrdererEndpoints item in your org definition
    Addresses:
        - orderer.example.com:7050

    EtcdRaft:
        Consenters:
        - Host: orderer.example.com
          Port: 7050
          ClientTLSCert: ./organizations/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt
          ServerTLSCert: ./organizations/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt

    # Batch Timeout: The amount of time to wait before creating a batch
    BatchTimeout: 2s

    # Batch Size: Controls the number of messages batched into a block
    BatchSize:

        # Max Message Count: The maximum number of messages to permit in a batch
        MaxMessageCount: 10

        # Absolute Max Bytes: The absolute maximum number of bytes allowed for
        # the serialized messages in a batch.
        AbsoluteMaxBytes: 99 MB

        # Preferred Max Bytes: The preferred maximum number of bytes allowed for
        # the serialized messages in a batch. A message larger than the preferred
        # max bytes will result in a batch larger than preferred max bytes.
        PreferredMaxBytes: 512 KB

    # Organizations is the list of orgs which are defined as participants on
    # the orderer side of the network
    Organizations:

    # Policies defines the set of policies at this level of the config tree
    # For Orderer policies, their canonical path is
    #   /Channel/Orderer/<PolicyName>
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"
        # BlockValidation specifies what signatures must be included in the block
        # from the orderer for the peer to validate it.
        BlockValidation:
            Type: ImplicitMeta
            Rule: "ANY Writers"

################################################################################
#
#   CHANNEL
#
#   This section defines the values to encode into a config transaction or
#   genesis block for channel related parameters.
#
################################################################################
Channel: &ChannelDefaults
    # Policies defines the set of policies at this level of the config tree
    # For Channel policies, their canonical path is
    #   /Channel/<PolicyName>
    Policies:
        # Who may invoke the 'Deliver' API
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        # Who may invoke the 'Broadcast' API
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        # By default, who may modify elements at this config level
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"

    # Capabilities describes the channel level capabilities, see the
    # dedicated Capabilities section elsewhere in this file for a full
    # description
    Capabilities:
        <<: *ChannelCapabilities

################################################################################
#
#   Profile
#
#   - Different configuration profiles may be encoded here to be specified
#   as parameters to the configtxgen tool
#
################################################################################
Profiles:

    TwoOrgsApplicationGenesis:
        <<: *ChannelDefaults
        Orderer:
            <<: *OrdererDefaults
            Organizations:
                - *OrdererOrg
            Capabilities:
                <<: *OrdererCapabilities
        Application:
            <<: *ApplicationDefaults
            Organizations:
                - *Org1
                - *Org2
            Capabilities:
                <<: *ApplicationCapabilities

orderer节点

1.docker-compose-orderer-ca.yaml


version: '2'

services:
  ca_orderer:
    image: hyperledger/fabric-ca:latest
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca-orderer
      - FABRIC_CA_SERVER_TLS_ENABLED=true
      - FABRIC_CA_SERVER_PORT=9054
    ports:
      - "9054:9054"
    command: sh -c 'fabric-ca-server start -b admin:adminpw -d'
    volumes:
      - ../organizations/fabric-ca/ordererOrg:/etc/hyperledger/fabric-ca-server
    container_name: ca_orderer
    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"

2.docker-compose-orderer.yaml


version: '2'

services:
  couchdb0:
    container_name: couchdb0
    image: couchdb:3.1.1
    # Populate the COUCHDB_USER and COUCHDB_PASSWORD to set an admin user and password
    # for CouchDB.  This will prevent CouchDB from operating in an "Admin Party" mode.
    environment:
      - COUCHDB_USER=admin
      - COUCHDB_PASSWORD=adminpw
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"
      
  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer:latest
    environment:
      #Generic peer variables
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - FABRIC_LOGGING_SPEC=INFO
      #- FABRIC_LOGGING_SPEC=DEBUG
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_PROFILE_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
      # Peer specific variabes
      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LISTENADDRESS=0.0.0.0:7051
      - CORE_PEER_CHAINCODEADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_BOOTSTRAP=peer0.org1.example.com:7051
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:5984
      - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=admin
      - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=adminpw
    depends_on:
      - couchdb0
    volumes:
        - /var/run/docker.sock:/host/var/run/docker.sock
        - ../organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
        - ../organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
        - peer0.org1.example.com:/var/hyperledger/production
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools:latest
    tty: true
    stdin_open: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - FABRIC_LOGGING_SPEC=INFO
      #- FABRIC_LOGGING_SPEC=DEBUG
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: /bin/bash
    volumes:
        - /var/run/:/host/var/run/
        - ../organizations:/opt/gopath/src/github.com/hyperledger/fabric/peer/organizations
        - ../scripts:/opt/gopath/src/github.com/hyperledger/fabric/peer/scripts/
        - ../channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts

    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"
      
      
volumes:
    peer0.org1.example.com: {}

org1节点

1.docker-compose-org1-ca.yaml


version: '2'

services:
  ca_org1:
    image: hyperledger/fabric-ca:latest
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca-org1
      - FABRIC_CA_SERVER_TLS_ENABLED=true
      - FABRIC_CA_SERVER_PORT=7054
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start -b admin:adminpw -d'
    volumes:
      - ../organizations/fabric-ca/org1:/etc/hyperledger/fabric-ca-server
    container_name: ca_org1
    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"

2.docker-compose-org1.yaml


version: '2'

services:
  couchdb0:
    container_name: couchdb0
    image: couchdb:3.1.1
    # Populate the COUCHDB_USER and COUCHDB_PASSWORD to set an admin user and password
    # for CouchDB.  This will prevent CouchDB from operating in an "Admin Party" mode.
    environment:
      - COUCHDB_USER=admin
      - COUCHDB_PASSWORD=adminpw
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"
      
  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer:latest
    environment:
      #Generic peer variables
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - FABRIC_LOGGING_SPEC=INFO
      #- FABRIC_LOGGING_SPEC=DEBUG
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_PROFILE_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
      # Peer specific variabes
      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LISTENADDRESS=0.0.0.0:7051
      - CORE_PEER_CHAINCODEADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_BOOTSTRAP=peer0.org1.example.com:7051
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb0:5984
      - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=admin
      - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=adminpw
    depends_on:
      - couchdb0
    volumes:
        - /var/run/docker.sock:/host/var/run/docker.sock
        - ../organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
        - ../organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
        - peer0.org1.example.com:/var/hyperledger/production
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools:latest
    tty: true
    stdin_open: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - FABRIC_LOGGING_SPEC=INFO
      #- FABRIC_LOGGING_SPEC=DEBUG
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: /bin/bash
    volumes:
        - /var/run/:/host/var/run/
        - ../organizations:/opt/gopath/src/github.com/hyperledger/fabric/peer/organizations
        - ../scripts:/opt/gopath/src/github.com/hyperledger/fabric/peer/scripts/
        - ../channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts

    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"
      
      
volumes:
    peer0.org1.example.com: {}

org2节点

1.docker-compose-org2-ca.yaml


version: '2'

services:
  ca_org2:
    image: hyperledger/fabric-ca:latest
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca-org2
      - FABRIC_CA_SERVER_TLS_ENABLED=true
      - FABRIC_CA_SERVER_PORT=8054
    ports:
      - "8054:8054"
    command: sh -c 'fabric-ca-server start -b admin:adminpw -d'
    volumes:
      - ../organizations/fabric-ca/org2:/etc/hyperledger/fabric-ca-server
    container_name: ca_org2
    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"

2.docker-compose-org2.yaml


version: '2'

services:    
  couchdb1:
    container_name: couchdb1
    image: couchdb:3.1.1
    # Populate the COUCHDB_USER and COUCHDB_PASSWORD to set an admin user and password
    # for CouchDB.  This will prevent CouchDB from operating in an "Admin Party" mode.
    environment:
      - COUCHDB_USER=admin
      - COUCHDB_PASSWORD=adminpw
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"
      
  peer0.org2.example.com:
    container_name: peer0.org2.example.com
    image: hyperledger/fabric-peer:latest
    environment:
      #Generic peer variables
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - FABRIC_LOGGING_SPEC=INFO
      #- FABRIC_LOGGING_SPEC=DEBUG
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_PROFILE_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
      # Peer specific variabes
      - CORE_PEER_ID=peer0.org2.example.com
      - CORE_PEER_ADDRESS=peer0.org2.example.com:9051
      - CORE_PEER_LISTENADDRESS=0.0.0.0:9051
      - CORE_PEER_CHAINCODEADDRESS=peer0.org2.example.com:9052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:9052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:9051
      - CORE_PEER_GOSSIP_BOOTSTRAP=peer0.org2.example.com:9051
      - CORE_PEER_LOCALMSPID=Org2MSP
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb1:5984
      - CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME=admin
      - CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD=adminpw
    depends_on:
      - couchdb1
    volumes:
        - /var/run/docker.sock:/host/var/run/docker.sock
        - ../organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp:/etc/hyperledger/fabric/msp
        - ../organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls:/etc/hyperledger/fabric/tls
        - peer0.org2.example.com:/var/hyperledger/production
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 9051:9051
      - 9052:9052
      - 9053:9053
    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools:latest
    tty: true
    stdin_open: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - FABRIC_LOGGING_SPEC=INFO
      #- FABRIC_LOGGING_SPEC=DEBUG
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: /bin/bash
    volumes:
        - /var/run/:/host/var/run/
        - ../organizations:/opt/gopath/src/github.com/hyperledger/fabric/peer/organizations
        - ../scripts:/opt/gopath/src/github.com/hyperledger/fabric/peer/scripts/
        - ../channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer0.org2.example.com
    extra_hosts:
      - "orderer.example.com:192.168.31.8"
      - "peer0.org1.example.com:192.168.31.70"
      - "peer0.org2.example.com:192.168.31.11"
      
volumes:
    peer0.org2.example.com: {}

目录结构如下

3、启动服务

#order节点

#启动fabric-ca
docker-compose -f docker/docker-compose-orderer-ca.yaml up -d
. organizations/fabric-ca/registerEnroll.sh 
createOrderer
./organizations/ccp-generate.sh
#启动orderer
docker-compose -f docker/docker-compose-orderer.yaml up -d

#org1
docker-compose -f docker/docker-compose-org1-ca.yaml up -d
. organizations/fabric-ca/registerEnroll.sh 
createOrg1
./organizations/ccp-generate.sh
docker-compose -f docker/docker-compose-org1.yaml up -d

#org2
docker-compose -f docker/docker-compose-org2-ca.yaml up -d
. organizations/fabric-ca/registerEnroll.sh 
createOrg2
./organizations/ccp-generate.sh
docker-compose -f docker/docker-compose-org2.yaml up -d

4、创建通道

1、创建通道

#orderer
#前提把其他组织机构证书复制到order节点
configtxgen -profile TwoOrgsApplicationGenesis -outputBlock ./channel-artifacts/mychannel.block -channelID mychannel

#org1

osnadmin channel join --channel-id mychannel --config-block ./channel-artifacts/mychannel.block -o orderer.example.com:7053 --ca-file "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" --client-cert "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt" --client-key "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.key"

Status: 201
{
	"name": "mychannel",
	"url": "/participation/v1/channels/mychannel",
	"consensusRelation": "consenter",
	"status": "active",
	"height": 1
}

2.设置环境变量

# Environment variables for Org1

export CORE_PEER_TLS_ENABLED=true
export ORDERER_CA=${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
export PEER0_ORG1_CA=${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
export ORDERER_ADMIN_TLS_SIGN_CERT=${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt
export ORDERER_ADMIN_TLS_PRIVATE_KEY=${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.key

export PATH=${PWD}/../bin:$PATH
export FABRIC_CFG_PATH=$PWD/../config/
export CORE_PEER_TLS_ENABLED=true
export CORE_PEER_LOCALMSPID="Org1MSP"
export CORE_PEER_TLS_ROOTCERT_FILE=${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
export CORE_PEER_MSPCONFIGPATH=${PWD}/organizations/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
export CORE_PEER_ADDRESS=peer0.org1.example.com:7051

# Environment variables for Org2
export CORE_PEER_TLS_ENABLED=true
export ORDERER_CA=${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
export PEER0_ORG1_CA=${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
export ORDERER_ADMIN_TLS_SIGN_CERT=${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt
export ORDERER_ADMIN_TLS_PRIVATE_KEY=${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.key

export PATH=${PWD}/../bin:$PATH
export FABRIC_CFG_PATH=$PWD/../config/
export CORE_PEER_TLS_ENABLED=true
export CORE_PEER_LOCALMSPID="Org2MSP"
export CORE_PEER_TLS_ROOTCERT_FILE=${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
export CORE_PEER_MSPCONFIGPATH=${PWD}/organizations/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
export CORE_PEER_ADDRESS=peer0.org2.example.com:9051

3.加入通道

#org1

root@ubuntu:/mutideploy# peer channel join -b ./channel-artifacts/mychannel.block
2022-03-29 18:25:42.077 PDT [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2022-03-29 18:25:42.241 PDT [channelCmd] executeJoin -> INFO 002 Successfully submitted proposal to join channel

#org2
root@ubuntu:/mutideploy# peer channel join -b ./channel-artifacts/mychannel.block
2022-03-29 18:27:05.989 PDT [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2022-03-29 18:27:06.148 PDT [channelCmd] executeJoin -> INFO 002 Successfully submitted proposal to join channel

4.定义锚节点

#org1
root@ubuntu:/home/hanlw/go/src/sdmk/mutideploy# docker exec cli ./scripts/setAnchorPeer.sh 1 mychannel
+ peer channel fetch config config_block.pb -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com -c mychannel --tls --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
Using organization 1
Fetching channel config for channel mychannel
Using organization 1
Fetching the most recent configuration block for the channel
2022-03-30 01:28:02.095 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2022-03-30 01:28:02.103 UTC [cli.common] readBlock -> INFO 002 Received block: 0
2022-03-30 01:28:02.103 UTC [channelCmd] fetch -> INFO 003 Retrieving last config block: 0
2022-03-30 01:28:02.113 UTC [cli.common] readBlock -> INFO 004 Received block: 0
Decoding config block to JSON and isolating config to Org1MSPconfig.json
+ configtxlator proto_decode --input config_block.pb --type common.Block
+ jq '.data.data[0].payload.data.config'
+ jq '.channel_group.groups.Application.groups.Org1MSP.values += {"AnchorPeers":{"mod_policy": "Admins","value":{"anchor_peers": [{"host": "peer0.org1.example.com","port": 7051}]},"version": "0"}}' Org1MSPconfig.json
Generating anchor peer update transaction for Org1 on channel mychannel
+ configtxlator proto_encode --input Org1MSPconfig.json --type common.Config
+ configtxlator proto_encode --input Org1MSPmodified_config.json --type common.Config
+ configtxlator compute_update --channel_id mychannel --original original_config.pb --updated modified_config.pb
+ configtxlator proto_decode --input config_update.pb --type common.ConfigUpdate
++ cat config_update.json
+ jq .
+ echo '{"payload":{"header":{"channel_header":{"channel_id":"mychannel", "type":2}},"data":{"config_update":{' '"channel_id":' '"mychannel",' '"isolated_data":' '{},' '"read_set":' '{' '"groups":' '{' '"Application":' '{' '"groups":' '{' '"Org1MSP":' '{' '"groups":' '{},' '"mod_policy":' '"",' '"policies":' '{' '"Admins":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Endorsement":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Readers":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Writers":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '}' '},' '"values":' '{' '"MSP":' '{' '"mod_policy":' '"",' '"value":' null, '"version":' '"0"' '}' '},' '"version":' '"0"' '}' '},' '"mod_policy":' '"",' '"policies":' '{},' '"values":' '{},' '"version":' '"0"' '}' '},' '"mod_policy":' '"",' '"policies":' '{},' '"values":' '{},' '"version":' '"0"' '},' '"write_set":' '{' '"groups":' '{' '"Application":' '{' '"groups":' '{' '"Org1MSP":' '{' '"groups":' '{},' '"mod_policy":' '"Admins",' '"policies":' '{' '"Admins":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Endorsement":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Readers":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Writers":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '}' '},' '"values":' '{' '"AnchorPeers":' '{' '"mod_policy":' '"Admins",' '"value":' '{' '"anchor_peers":' '[' '{' '"host":' '"peer0.org1.example.com",' '"port":' 7051 '}' ']' '},' '"version":' '"0"' '},' '"MSP":' '{' '"mod_policy":' '"",' '"value":' null, '"version":' '"0"' '}' '},' '"version":' '"1"' '}' '},' '"mod_policy":' '"",' '"policies":' '{},' '"values":' '{},' '"version":' '"0"' '}' '},' '"mod_policy":' '"",' '"policies":' '{},' '"values":' '{},' '"version":' '"0"' '}' '}}}}'
+ configtxlator proto_encode --input config_update_in_envelope.json --type common.Envelope
2022-03-30 01:28:02.589 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2022-03-30 01:28:02.609 UTC [channelCmd] update -> INFO 002 Successfully submitted channel update
Anchor peer set for org 'Org1MSP' on channel 'mychannel'

#org2
root@ubuntu:/mutideploy# docker exec cli ./scripts/setAnchorPeer.sh 2 mychannel
Using organization 2
Fetching channel config for channel mychannel
Using organization 2
Fetching the most recent configuration block for the channel
+ peer channel fetch config config_block.pb -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com -c mychannel --tls --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
2022-03-30 01:28:19.155 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2022-03-30 01:28:19.174 UTC [cli.common] readBlock -> INFO 002 Received block: 1
2022-03-30 01:28:19.174 UTC [channelCmd] fetch -> INFO 003 Retrieving last config block: 1
2022-03-30 01:28:19.186 UTC [cli.common] readBlock -> INFO 004 Received block: 1
Decoding config block to JSON and isolating config to Org2MSPconfig.json
+ configtxlator proto_decode --input config_block.pb --type common.Block
+ jq '.data.data[0].payload.data.config'
+ jq '.channel_group.groups.Application.groups.Org2MSP.values += {"AnchorPeers":{"mod_policy": "Admins","value":{"anchor_peers": [{"host": "peer0.org2.example.com","port": 9051}]},"version": "0"}}' Org2MSPconfig.json
Generating anchor peer update transaction for Org2 on channel mychannel
+ configtxlator proto_encode --input Org2MSPconfig.json --type common.Config
+ configtxlator proto_encode --input Org2MSPmodified_config.json --type common.Config
+ configtxlator compute_update --channel_id mychannel --original original_config.pb --updated modified_config.pb
+ configtxlator proto_decode --input config_update.pb --type common.ConfigUpdate
+ jq .
++ cat config_update.json
+ echo '{"payload":{"header":{"channel_header":{"channel_id":"mychannel", "type":2}},"data":{"config_update":{' '"channel_id":' '"mychannel",' '"isolated_data":' '{},' '"read_set":' '{' '"groups":' '{' '"Application":' '{' '"groups":' '{' '"Org2MSP":' '{' '"groups":' '{},' '"mod_policy":' '"",' '"policies":' '{' '"Admins":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Endorsement":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Readers":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Writers":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '}' '},' '"values":' '{' '"MSP":' '{' '"mod_policy":' '"",' '"value":' null, '"version":' '"0"' '}' '},' '"version":' '"0"' '}' '},' '"mod_policy":' '"",' '"policies":' '{},' '"values":' '{},' '"version":' '"0"' '}' '},' '"mod_policy":' '"",' '"policies":' '{},' '"values":' '{},' '"version":' '"0"' '},' '"write_set":' '{' '"groups":' '{' '"Application":' '{' '"groups":' '{' '"Org2MSP":' '{' '"groups":' '{},' '"mod_policy":' '"Admins",' '"policies":' '{' '"Admins":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Endorsement":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Readers":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '},' '"Writers":' '{' '"mod_policy":' '"",' '"policy":' null, '"version":' '"0"' '}' '},' '"values":' '{' '"AnchorPeers":' '{' '"mod_policy":' '"Admins",' '"value":' '{' '"anchor_peers":' '[' '{' '"host":' '"peer0.org2.example.com",' '"port":' 9051 '}' ']' '},' '"version":' '"0"' '},' '"MSP":' '{' '"mod_policy":' '"",' '"value":' null, '"version":' '"0"' '}' '},' '"version":' '"1"' '}' '},' '"mod_policy":' '"",' '"policies":' '{},' '"values":' '{},' '"version":' '"0"' '}' '},' '"mod_policy":' '"",' '"policies":' '{},' '"values":' '{},' '"version":' '"0"' '}' '}}}}'
+ configtxlator proto_encode --input config_update_in_envelope.json --type common.Envelope
2022-03-30 01:28:19.454 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
2022-03-30 01:28:19.516 UTC [channelCmd] update -> INFO 002 Successfully submitted channel update
Anchor peer set for org 'Org2MSP' on channel 'mychannel'

5、部署链码

1.打包链码

peer lifecycle chaincode package basic.tar.gz --path ./chaincode/go --lang golang --label basic_1.0

2.安装链码

#org1
peer lifecycle chaincode install basic.tar.gz
peer lifecycle chaincode queryinstalled

#将basic.tar.gz传到org2
#org2
peer lifecycle chaincode install basic.tar.gz
peer lifecycle chaincode queryinstalled

3、批准智能合约

#org1批准智能合约
peer lifecycle chaincode approveformyorg -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" --channelID mychannel --name basic --version 1.0 --package-id basic_1.0:4ec191e793b27e953ff2ede5a8bcc63152cecb1e4c3f301a26e22692c61967ad --sequence 1
#查询是否准备就绪
peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name basic --version 1.0 --sequence 1 --output json

#org2批准智能合约
peer lifecycle chaincode approveformyorg -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" --channelID mychannel --name basic --version 1.0 --package-id basic_1.0:4ec191e793b27e953ff2ede5a8bcc63152cecb1e4c3f301a26e22692c61967ad --sequence 1
#查询是否准备就绪
peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name basic --version 1.0 --sequence 1 --output json

root@ubuntu:/mutideploy# peer lifecycle chaincode install basic.tar.gz
2022-03-29 18:30:06.491 PDT [cli.lifecycle.chaincode] submitInstallProposal -> INFO 001 Installed remotely: response:<status:200 payload:"\nJbasic_1.0:4ec191e793b27e953ff2ede5a8bcc63152cecb1e4c3f301a26e22692c61967ad\022\tbasic_1.0" > 
2022-03-29 18:30:06.491 PDT [cli.lifecycle.chaincode] submitInstallProposal -> INFO 002 Chaincode code package identifier: basic_1.0:4ec191e793b27e953ff2ede5a8bcc63152cecb1e4c3f301a26e22692c61967ad
root@ubuntu:/mutideploy# peer lifecycle chaincode queryinstalled
Installed chaincodes on peer:
Package ID: basic_1.0:4ec191e793b27e953ff2ede5a8bcc63152cecb1e4c3f301a26e22692c61967ad, Label: basic_1.0
root@ubuntu:/mutideploy# peer lifecycle chaincode approveformyorg -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile /home/hanlw/go/src/sdmk/mutideploy/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID mychannel --name basic --version 1.0 --package-id basic_1.0:4ec191e793b27e953ff2ede5a8bcc63152cecb1e4c3f301a26e22692c61967ad --sequence 1
2022-03-29 18:31:20.659 PDT [chaincodeCmd] ClientWait -> INFO 001 txid [a39bb5afc6e47b2f86512152460233bf001f08788fae28fac772cdff616abd64] committed with status (VALID) at peer0.org1.example.com:7051
root@ubuntu:/home/hanlw/go/src/sdmk/mutideploy# peer lifecycle chaincode checkcommitreadiness --channelID mychannel --name basic --version 1.0 --sequence 1 
Chaincode definition for chaincode 'basic', version '1.0', sequence '1' on channel 'mychannel' approval status by org:
Org1MSP: true
Org2MSP: true

4、提交链码

#提交链码，org1提交即可
peer lifecycle chaincode commit -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" --channelID mychannel --name basic  --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt" --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" --version 1.0 --sequence 1
peer lifecycle chaincode querycommitted --channelID mychannel --name basic

root@ubuntu:/mutideploy# peer lifecycle chaincode commit -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile /home/hanlw/go/src/sdmk/mutideploy/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem --channelID mychannel --name basic  --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles /home/hanlw/go/src/sdmk/mutideploy/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles /home/hanlw/go/src/sdmk/mutideploy/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt --version 1.0 --sequence 1
2022-03-29 18:32:42.027 PDT [chaincodeCmd] ClientWait -> INFO 001 txid [dbb586c752b17ea1205b4bec8cbea7cdfe77dd71c907cee754658b4f97070526] committed with status (VALID) at peer0.org1.example.com:7051
2022-03-29 18:32:42.054 PDT [chaincodeCmd] ClientWait -> INFO 002 txid [dbb586c752b17ea1205b4bec8cbea7cdfe77dd71c907cee754658b4f97070526] committed with status (VALID) at peer0.org2.example.com:9051
root@ubuntu:/mutideploy# peer lifecycle chaincode querycommitted --channelID mychannel --name basic
Committed chaincode definition for chaincode 'basic' on channel 'mychannel':
Version: 1.0, Sequence: 1, Endorsement Plugin: escc, Validation Plugin: vscc, Approvals: [Org1MSP: true, Org2MSP: true]

5、初始化链码

#初始化
peer chaincode invoke -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" -C mychannel -n basic --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt" --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" -c '{"function":"InitLedger","Args":[]}'
#查询
peer chaincode query -C mychannel -n basic -c '{"Args":["GetAllAssets"]}'
#修改
peer chaincode invoke -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" -C mychannel -n basic --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt" --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" -c '{"function":"TransferAsset","Args":["asset6","Christopher"]}'
#查询
peer chaincode query -C mychannel -n basic -c '{"Args":["GetAllAssets"]}'

root@ubuntu:/mutideploy# peer chaincode invoke -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" -C mychannel -n basic --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt" --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" -c '{"function":"InitLedger","Args":[]}'
2022-03-29 18:34:00.524 PDT [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200 
root@ubuntu:/mutideploy# peer chaincode query -C mychannel -n basic -c '{"Args":["GetAllAssets"]}'
[{"ID":"asset1","color":"blue","size":5,"owner":"Tomoko","appraisedValue":300},{"ID":"asset2","color":"red","size":5,"owner":"Brad","appraisedValue":400},{"ID":"asset3","color":"green","size":10,"owner":"Jin Soo","appraisedValue":500},{"ID":"asset4","color":"yellow","size":10,"owner":"Max","appraisedValue":600},{"ID":"asset5","color":"black","size":15,"owner":"Adriana","appraisedValue":700},{"ID":"asset6","color":"white","size":15,"owner":"Michel","appraisedValue":800}]
root@ubuntu:/mutideploy# peer chaincode list --installed
Get installed chaincodes on peer:
root@ubuntu:/home/hanlw/go/src/sdmk/mutideploy# peer chaincode invoke -o orderer.example.com:7050 --ordererTLSHostnameOverride orderer.example.com --tls --cafile "${PWD}/organizations/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem" -C mychannel -n basic --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt" --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles "${PWD}/organizations/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt" -c '{"function":"TransferAsset","Args":["asset6","Christopher"]}
> '
2022-03-29 18:41:55.235 PDT [chaincodeCmd] chaincodeInvokeOrQuery -> INFO 001 Chaincode invoke successful. result: status:200 
root@ubuntu:/mutideploy# peer chaincode query -C mychannel -n basic -c '{"Args":["GetAllAssets"]}'
[{"ID":"asset1","color":"blue","size":5,"owner":"Tomoko","appraisedValue":300},{"ID":"asset2","color":"red","size":5,"owner":"Brad","appraisedValue":400},{"ID":"asset3","color":"green","size":10,"owner":"Jin Soo","appraisedValue":500},{"ID":"asset4","color":"yellow","size":10,"owner":"Max","appraisedValue":600},{"ID":"asset5","color":"black","size":15,"owner":"Adriana","appraisedValue":700},{"ID":"asset6","color":"white","size":15,"owner":"Christopher","appraisedValue":800}]