Full command | Short command | Description |
status | stat | displays the current connection status |
disconnect | disc | prevents wpa_supplicant from connecting to any access point |
quit | q | exits wpa_cli |
terminate | term | kills wpa_supplicant |
reconfigure | recon | reloads wpa_supplicant with the configuration file supplied (-c parameter) |
scan | scan | scans for available access points (only scans it, doesn‘t display anything) |
scan_result | scan_r | displays the results of the last scan |
list_networks | list_n | displays a list of configured networks and their status (active or not, enabled or disabled) |
select_network | select_n | select a network among those defined to initiate a connection (ie select_network 0) |
enable_network | enable_n | makes a configured network available for selection (ie enable_network 0) |
disable_network | disable_n | makes a configured network unavailable for selection (ie disable_network 0) |
remove_network | remove_n | removes a network and its configuration from the list (ie remove_network 0) |
add_network | add_n | adds a new network to the list. Its id will be created automatically |
set_network | set_n | shows a very short list of available options to configure a network when supplied with no parameters. See next section for a list of extremely useful parameters to be used with set_network and get_network. |
get_network | get_n | displays the required parameter for the specified network. See nextsection for a list of parameters |
save_config | save_c | saves the configuration |
Android Wi-Fi wpa_cli与wpa_supplicant的交互
最新推荐文章于 2021-06-02 21:41:39 发布