ObjectArx-自定义对象-派生于AcDbObect

1.提供了详细的信息输出到文件，和4种对象引用（强弱所有者，强弱指针）和undo和惹到操作。

1. 重写AcDbObject虚函数

1.1 AcDbObject：基本函数重写

virtual Acad::ErrorStatus 
dwgInFields(AcDbDwgFiler* filer);

virtual Acad::ErrorStatus 
dwgOutFields(AcDbDwgFiler* filer) const;

virtual Acad::ErrorStatus 
dxfInFields(AcDbDxfFiler* filer);

virtual Acad::ErrorStatus 
dxfOutFields(AcDbDxfFiler* filer) const;

<Destructor> (~AcDbObject)

1.2 AcDbObject: 经常被重写的函数

virtual Acad::ErrorStatus 
audit(AcDbAuditInfo* pAuditInfo);

// Commonly useful, as this happens at a point where a new
// object state is being committed.
//
virtual Acad::ErrorStatus subClose();

// The next two functions apply to container objects. 
//
virtual Acad::ErrorStatus 
deepClone(AcDbObject* pOwnerObject,
          AcDbObject*& pClonedObject,
          AcDbIdMapping& idMap,
          Adesk::Boolean isPrimary = true) const;

virtual Acad::ErrorStatus 
wblockClone(AcRxObject* pOwnerObject,
            AcDbObject*& pClonedObject,
            AcDbIdMapping& idMap,
            Adesk::Boolean isPrimary = true) const;

1.3 AcDbObject：有时被重写的函数

virtual Acad::ErrorStatus 
subErase(Adesk::Boolean erasing);

virtual Acad::ErrorStatus 
subHandOverTo(AcDbObject* newObject);

virtual Acad::ErrorStatus 
subOpen(AcDb::OpenMode mode);

virtual Acad::ErrorStatus 
subCancel();

virtual Acad::ErrorStatus 
subSwapIdWith(AcDbObjectId otherId,
              Adesk::Boolean swapXdata = false,
              Adesk::Boolean swapExtDict = false);

1.4 AcDbObject：极少被重写的函数

virtual Acad::ErrorStatus 
setOwnerId(AcDbObjectId objId);

virtual resbuf*           
xData(const char* regappName = NULL) const;

virtual Acad::ErrorStatus 
setXData(const resbuf* xdata);

virtual void 
addPersistentReactor(AcDbObjectId objId);

virtual Acad::ErrorStatus 
removePersistentReactor(AcDbObjectId objId);

virtual void              
cancelled(const AcDbObject* dbObj);

virtual void              
copied(const AcDbObject* dbObj,
       const AcDbObject* newObj);

virtual void              
erased(const AcDbObject* dbObj,
       Adesk::Boolean pErasing = true);

virtual void              
goodbye(const AcDbObject* dbObj);

virtual void              
openedForModify(const AcDbObject* dbObj);

virtual void              
modified(const AcDbObject* dbObj);

virtual void              
modifyUndone(const AcDbObject* dbObj);

virtual void              
modifiedXData(const AcDbObject* dbObj);

virtual void              
unappended(const AcDbObject* dbObj);

virtual void              
objectClosed(const AcDbObjectId objId);

virtual void              
modifiedGraphics(const AcDbEntity* dbEnt);

1.5 AcRxObject: 极少被重写的函数

virtual Acad::ErrorStatus 
setOwnerId(AcDbObjectId objId);

virtual resbuf*           
xData(const char* regappName = NULL) const;

virtual Acad::ErrorStatus 
setXData(const resbuf* xdata);

virtual void 
addPersistentReactor(AcDbObjectId objId);

virtual Acad::ErrorStatus 
removePersistentReactor(AcDbObjectId objId);

virtual void              
cancelled(const AcDbObject* dbObj);

virtual void              
copied(const AcDbObject* dbObj,
       const AcDbObject* newObj);

virtual void              
erased(const AcDbObject* dbObj,
       Adesk::Boolean pErasing = true);

virtual void              
goodbye(const AcDbObject* dbObj);

virtual void              
openedForModify(const AcDbObject* dbObj);

virtual void              
modified(const AcDbObject* dbObj);

virtual void              
modifyUndone(const AcDbObject* dbObj);

virtual void              
modifiedXData(const AcDbObject* dbObj);

virtual void              
unappended(const AcDbObject* dbObj);

virtual void              
objectClosed(const AcDbObjectId objId);

virtual void              
modifiedGraphics(const AcDbEntity* dbEnt);

1.6 AcDbCurve: 必须被重写的函数

virtual Adesk::Boolean    
isClosed() const;      

virtual Adesk::Boolean    
isPeriodic() const;

virtual Adesk::Boolean    
isPlanar() const;

virtual Acad::ErrorStatus 
getPlane(AcGePlane&, AcDb::Planarity&) const; 

virtual Acad::ErrorStatus 
getStartParam(double&) const;

virtual Acad::ErrorStatus 
getEndParam(double&) const;

virtual Acad::ErrorStatus 
getStartPoint(AcGePoint3d&) const;

virtual Acad::ErrorStatus 
getEndPoint(AcGePoint3d&) const;

virtual Acad::ErrorStatus 
getPointAtParam(double, AcGePoint3d&) const;

virtual Acad::ErrorStatus 
getParamAtPoint(const AcGePoint3d&, double&)const;

virtual Acad::ErrorStatus 
getDistAtParam(double param, double& dist) const;

virtual Acad::ErrorStatus 
getParamAtDist(double dist, double& param) const;

virtual Acad::ErrorStatus 
getDistAtPoint(const AcGePoint3d&, double&) const;

virtual Acad::ErrorStatus 
getPointAtDist(double, AcGePoint3d&) const;

virtual Acad::ErrorStatus 
getFirstDeriv(
    double param,
    AcGeVector3d& firstDeriv) const;

virtual Acad::ErrorStatus 
getFirstDeriv(
    const AcGePoint3d&,
    AcGeVector3d& firstDeriv) const;

virtual Acad::ErrorStatus 
getSecondDeriv(
    double param,
    AcGeVector3d& secDeriv) const;

virtual Acad::ErrorStatus 
getSecondDeriv(
    const AcGePoint3d&,
    AcGeVector3d& secDeriv) const;

virtual Acad::ErrorStatus 
getClosestPointTo(
    const AcGePoint3d& givenPnt,
    AcGePoint3d& pointOnCurve,
    Adesk::Boolean extend = Adesk::kFalse) const;

virtual Acad::ErrorStatus 
getClosestPointTo(
    const AcGePoint3d& givenPnt,
    const AcGeVector3d& normal,
    AcGePoint3d& pointOnCurve,
    Adesk::Boolean extend = Adesk::kFalse) const;

virtual Acad::ErrorStatus 
getOrthoProjectedCurve(
    const AcGePlane&,
    AcDbCurve*& projCrv) const;

virtual Acad::ErrorStatus 
getProjectedCurve(
    const AcGePlane&,
    const AcGeVector3d& projDir,
    AcDbCurve*& projCrv) const;

virtual Acad::ErrorStatus 
getOffsetCurves(
    double offsetDist,
    AcDbVoidPtrArray& offsetCurves) const;

virtual Acad::ErrorStatus 
getSpline(AcDbSpline*& spline) const;

virtual Acad::ErrorStatus 
getSplitCurves(
    const AcGeDoubleArray& params,
    AcDbVoidPtrArray& curveSegments) const;

virtual Acad::ErrorStatus 
getSplitCurves(
    const AcGePoint3dArray& points,
    AcDbVoidPtrArray& curveSegments) const;

virtual Acad::ErrorStatus 
extend(double newParam);

virtual Acad::ErrorStatus 
extend(
    Adesk::Boolean extendStart, 
    const AcGePoint3d& toPoint);

virtual Acad::ErrorStatus 
getArea(double&) const;

2. 实现成员函数

当你实现一个自定义成员函数或重写一个函数时，首先要调用的是assertReadEnabled(), assertWriteEnabled(), or assertNotifyEnabled() 去检验该对象的正确的状态。 assertWriteEnabled() 是最重要的。可以使用此函数控制成员函数中发生的修改的undo操作。即使你不想要undo，也必须调用。

assertWriteEnabled(kFalse, kFalse);
//此调用将对象标记为增量保存。不遵守这个指令会导致损坏的图纸。