ARM Process state -- CPSR

xiaozhiwise

于 2024-09-30 15:57:23 发布

阅读量332

点赞数 6

分类专栏： Assembly 文章标签：汇编

本文链接：https://blog.csdn.net/xiaozhiwise/article/details/142658204

版权

Assembly 专栏收录该内容

471 篇文章 3 订阅

订阅专栏

Holds PE status and control information.
保存PE状态和控制信息。

N, bit [31]
Negative condition flag. Set to bit[31] of the result of the last flag-setting instruction. If the result is regarded as a two's complement signed integer, then N is set to 1 if the result was negative, and N is set to 0 if the result was positive or zero.

负条件标志。设置为最后一个标志设置指令结果的第[31]位。如果结果被视为2的补码有符号整数，则如果结果为负，则N设置为1，如果结果为正或零，则N设为0。

Z, bit [30]
Zero condition flag. Set to 1 if the result of the last flag-setting instruction was zero, and to 0 otherwise. A result of zero often indicates an equal result from a comparison.

零条件标志。如果最后一个标志设置指令的结果为零，则设置为1，否则设置为0。结果为零通常表示比较结果相等。

C, bit [29]
Carry condition flag. Set to 1 if the last flag-setting instruction resulted in a carry condition, for example an unsigned overflow on an addition.

携带状态标志。如果最后一个标志设置指令导致进位条件，例如加法时的无符号溢出，则设置为1。

V, bit [28]
Overflow condition flag. Set to 1 if the last flag-setting instruction resulted in an overflow condition, for example a signed overflow on an addition.

溢出状态标志。如果最后一个标志设置指令导致溢出情况，例如加法时的有符号溢出，则设置为1。

Q, bit [27]
Cumulative saturation bit. Set to 1 to indicate that overflow or saturation occurred in some instructions.

累积饱和位。设置为1表示某些指令中发生了溢出或饱和。

GE, bits [19:16]
    Greater than or Equal flags, for parallel addition and subtraction.

    大于或等于标志，用于并行加法和减法。

E, bit [9]
    Endianness state bit. Controls the load and store endianness for data accesses:
    0b0 Little-endian operation
    0b1 Big-endian operation.

端序状态位。控制数据访问的加载和存储端序

A, bit [8]
    SError interrupt mask bit. The possible values of this bit are:
    0b0 Exception not masked.
    0b1 Exception masked.

I, bit [7]
    IRQ mask bit. The possible values of this bit are:
    0b0 Exception not masked.
    0b1 Exception masked.

F, bit [6]
    FIQ mask bit. The possible values of this bit are:
    0b0 Exception not masked.
    0b1 Exception masked.

M, bits [3:0]
    Current PE mode. Possible values are:
    0b0000 User.
    0b0001 FIQ.
    0b0010 IRQ.
    0b0011 Supervisor.
    0b0110 Monitor.
    0b0111 Abort.
    0b1010 Hyp.
    0b1011 Undefined.
    0b1111 System.