如何实现华为单臂路由配置

使用eNSP搭建实验环境，配置单臂路由实现VLAN 10与VLAN 20互通

步骤

实现此案例需要按照如下步骤进行。

步骤一：配置交换机

[Huawei]vlan batch 10 20
[Huawei]int e0/0/1
[Huawei-Ethernet0/0/1]port link-t access 
[Huawei-Ethernet0/0/1]port default vlan 10
[Huawei-Ethernet0/0/1]int e0/0/2
[Huawei-Ethernet0/0/2]port link-t access
[Huawei-Ethernet0/0/2]port default vlan 20
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]port link-t trunk 
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20

步骤二：配置路由器

[Huawei]int g0/0/1.1
[Huawei-GigabitEthernet0/0/1.1]dot1q termination vid 10 
[Huawei-GigabitEthernet0/0/1.1]ip add 10.10.0.1 24
[Huawei-GigabitEthernet0/0/1.1]arp broadcast enable
[Huawei-GigabitEthernet0/0/1.1]int g