Fast Ethernet media types

最近因为工作需要用到cisco的switching.当然也算是自己开始学习switching的技术。在一般工作中简单的操作已经会了,但是最近发现在一个大规模集成测试中,network performance 非常低。测试线路一条上的话,另外一条就干脆跑不起来。找了个其它部门ccnp的人来看,发现是出现设置中的环路。但是环路解决了以后还是不能work。所以正在debug中。闲暇时候才发现cisco还是蛮有意思研究的,以前项目一直紧张没有时间看这个,现在决定开始学习这个。同时也开始记录自己学习中的一些资料记录

首先介绍一下Fast Ethernet Media Types

  • 100BaseTX
  • 100BaseT2
  • 100BaseT4
  • 100BaseFX
  • 1982年,IEEE把以太网技术标准化成802.3。随后技术类型经历了快速发展变化,从粗缆的10Base5发展到细缆的10Base2,再到1Base5(短暂的后退)、双绞线10BaseT,又到快速以太网五类线传输的100BaseTX、三类线传输的100BaseT4和光纤传输的100BaseFX,随后又出现的千兆以太网接口,包括短波长光传输1000BaseSX、长波长光传输1000BaseLX以及五类线传输1000BaseT。今年7月18日,IEEE又正式通过了802.3ae:10Gbps以太网标准(也叫万兆以太网),

Media Gateway 用于监控车载以太网通信,以太网端口测试,CAN/LIN/Flexray与100Base-T1路由测试等;在BMW,AUDI,BOSCH以及国内多公司大量使用; MediaGateway from Technica Engineering is a development tool for testing and analyzing on-board vehicle networks. MediaGateway from Technica Engineering is the most widely used development and testing tool for on-board vehicle networks using 100BASE-T1. It’s in-built automotive switches and 12 x 100BASE-T1 ports enable both capture of traffic between devices while maintaining the normal communication, as well as interaction with such devices via your test set-up. It supports single and double tagging of VLANs, Mirroring, Forwarding and more. MediaGateway is excellently suitable for subsystem testing stations and can also be installed in a test vehicle without complications. It is configured conveniently via a browser through the integrated web server. An additional and optional CAN-Ethernet bi-directional conversion is available, as well as FlexRay logging via Ethernet and one SFP slot. The SFP slot supports commercial-grade SFP modules (e.g. optical or RJ-45) as well as our 100BASE-T1 SFP Module in order to get a 13th Automotive Ethernet Port or our 1000BASE-T1 SFP Module – this makes the MediaGateway ready for Automotive Gigabit Ethernet! 12 Broadcom 100BASE-T1 ports (100 MBit/s full duplex on a single unshielded twisted pair) 3 Gigabit Ethernet ports 1 SFP Gigabit Ethernet port Automotive Tyco MQS connectors for 100BASE-T1 and power supply Web server for easy configuration: Master/Slave, HalfOut/FullOut, Port Forwarding, Port Mirroring, VLAN Tagging WakeUp function by CAN Bus or Wakeline Power output for attached devices: VBAT max. 1 Ampere in total 19 status LEDs Possibility to reset to default settings by pushbutton Robust steel case Power requirement: 8 to 16 V DC, power consumption: 8 Watt Size: 195 x 143 x 33 mm 802.1AS Bridge function
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值