依赖注入:
1. 使用Spring注解来注入属性
1.1. 使用注解以前我们是怎样注入属性的
类的实现:
Java代码
public class UserManagerImpl implements UserManager {
private UserDao userDao;
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
...
}
public class UserManagerImpl implements UserManager {
private UserDao userDao;
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
...
}
配置文件:
Java代码
<bean id="userManagerImpl" class="com.kedacom.spring.annotation.service.UserManagerImpl">
<property name="userDao" ref="userDao" />
</bean>
<bean id="userDao" class="com.kedacom.spring.annotation.persistence.UserDaoImpl">
<property name="sessionFactory" ref="mySessionFactory" />
</bean>
<bean id="userManagerImpl" class="com.kedacom.spring.annotation.service.UserManagerImpl">
<property name="userDao" ref="userDao" />
</bean>
<bean id="userDao" class="com.kedacom.spring.annotation.persistence.UserDaoImpl">
<property name="sessionFactory" ref="mySessionFactory" />
</bean>
1.2. 引入@Autowired注解(不推荐使用,建议使用@Resource)
类的实现(对成员变量进行标注)
Java代码
public class UserManagerImpl implements UserManager {
@Autowired
private UserDao userDao;
...
}
public class UserManagerImpl implements UserManager {
@Autowired
private UserDao userDao;
...
}
或者(对方法进行标注)
Java代码
public class UserManagerImpl implements UserManager {
private UserDao userDao;
@Autowired
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
...
}
public class UserManagerImpl implements UserManager {
private UserDao userDao;
@Autowired
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
...
}
配置文件
Java代码
<bean id="userManagerImpl" class="com.kedacom.spring.annotation.service.UserManagerImpl" />
<bean id="userDao" class="com.kedacom.spring.annotation.persistence.UserDaoImpl">
<property name="sessionFactory" ref="mySessionFactory" />
</bean>
<bean id="userManagerImpl" class="com.kedacom.spring.annotation.service.UserManagerImpl" />
<bean id="userDao" class="com.kedacom.spring.annotation.persistence.UserDaoImpl">
<property name="sessionFactory" ref="mySessionFactory" />
</bean>
@Autowired可以对成员变量、方法和构造函数进行标注,来完成自动装配的工作。以上两种不同实现方式中,@Autowired的标注位置不同,它们都会在Spring在初始化userManagerImpl这个bean时,自动装配userDao这个属性,区别是:第一种实现中,Spring会直接将UserDao类型的唯一一个bean赋值给userDao这个成员变量;第二种实现中,Spring会调用setUserDao方法来将UserDao类型的唯一一个bean装配到userDao这个属性。
1.3. 让@Autowired工作起来
要使@Autowired能够工作,还需要在配置文件中加入以下代码
Java代码
<bean class="org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor" />
<bean class="org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor" />
1.4. @Qualifier
@Autowired是根据类型进行自动装配的。在上面的例子中,如果当Spring上下文中存在不止一个UserDao类型的bean时,就会抛出BeanCreationException异常;如果Spring上下文中不存在UserDao类型的bean,也会抛出BeanCreationException异常。我们可以使用@Qualifier配合@Autowired来解决这些问题。
1. 可能存在多个UserDao实例
Java代码
@Autowired
public void setUserDao(@Qualifier("userDao") UserDao userDao) {
this.userDao = userDao;
}
@Autowired
public void setUserDao(@Qualifier("userDao") UserDao userDao) {
this.userDao = userDao;
}
这样,Spring会找到id为userDao的bean进行装配。
2. 可能不存在UserDao实例
Java代码
@Autowired(required = false)
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
@Autowired(required = false)
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
1.5. @Resource(JSR-250标准注解,推荐使用它来代替Spring专有的@Autowired注解)
Spring 不但支持自己定义的@Autowired注解,还支持几个由JSR-250规范定义的注解,它们分别是@Resource、@PostConstruct以及@PreDestroy。
@Resource的作用相当于@Autowired,只不过@Autowired按byType自动注入,而@Resource默认按byName自动注入罢了。@Resource有两个属性是比较重要的,分别是name和type,Spring将@Resource注解的name属性解析为bean的名字,而type属性则解析为bean的类型。所以如果使用name属性,则使用byName的自动注入策略,而使用type属性时则使用byType自动注入策略。如果既不指定name也不指定type属性,这时将通过反射机制使用byName自动注入策略。
@Resource装配顺序
如果同时指定了name和type,则从Spring上下文中找到唯一匹配的bean进行装配,找不到则抛出异常
如果指定了name,则从上下文中查找名称(id)匹配的bean进行装配,找不到则抛出异常
如果指定了type,则从上下文中找到类型匹配的唯一bean进行装配,找不到或者找到多个,都会抛出异常
如果既没有指定name,又没有指定type,则自动按照byName方式进行装配(见2);如果没有匹配,则回退为一个原始类型(UserDao)进行匹配,如果匹配则自动装配;
1.6. @PostConstruct(JSR-250)
在方法上加上注解@PostConstruct,这个方法就会在Bean初始化之后被Spring容器执行(注:Bean初始化包括,实例化Bean,并装配Bean的属性(依赖注入))。
它的一个典型的应用场景是,当你需要往Bean里注入一个其父类中定义的属性,而你又无法复写父类的属性或属性的setter方法时,如:
Java代码
public class UserDaoImpl extends HibernateDaoSupport implements UserDao {
private SessionFactory mySessionFacotry;
@Resource
public void setMySessionFacotry(SessionFactory sessionFacotry) {
this.mySessionFacotry = sessionFacotry;
}
@PostConstruct
public void injectSessionFactory() {
super.setSessionFactory(mySessionFacotry);
}
...
}
public class UserDaoImpl extends HibernateDaoSupport implements UserDao {
private SessionFactory mySessionFacotry;
@Resource
public void setMySessionFacotry(SessionFactory sessionFacotry) {
this.mySessionFacotry = sessionFacotry;
}
@PostConstruct
public void injectSessionFactory() {
super.setSessionFactory(mySessionFacotry);
}
...
}
这里通过@PostConstruct,为UserDaoImpl的父类里定义的一个sessionFactory私有属性,注入了我们自己定义的sessionFactory(父类的setSessionFactory方法为final,不可复写),之后我们就可以通过调用super.getSessionFactory()来访问该属性了。
1.7. @PreDestroy(JSR-250)
在方法上加上注解@PreDestroy,这个方法就会在Bean初始化之后被Spring容器执行。由于我们当前还没有需要用到它的场景,这里不不去演示。其用法同@PostConstruct。
1.8. 使用<context:annotation-config />简化配置
Spring2.1添加了一个新的context的Schema命名空间,该命名空间对注释驱动、属性文件引入、加载期织入等功能提供了便捷的配置。我们知道注释本身是不会做任何事情的,它仅提供元数据信息。要使元数据信息真正起作用,必须让负责处理这些元数据的处理器工作起来。
AutowiredAnnotationBeanPostProcessor和CommonAnnotationBeanPostProcessor就是处理这些注释元数据的处理器。但是直接在Spring配置文件中定义这些Bean显得比较笨拙。Spring为我们提供了一种方便的注册这些BeanPostProcessor的方式,这就是<context:annotation-config />:
Java代码
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<context:annotation-config />
</beans>
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<context:annotation-config />
</beans>
<context:annotationconfig />将隐式地向Spring容器注册AutowiredAnnotationBeanPostProcessor、CommonAnnotationBeanPostProcessor、 PersistenceAnnotationBeanPostProcessor以及RequiredAnnotationBeanPostProcessor这4个BeanPostProcessor。
2. 使用Spring注解完成Bean的定义
以上我们介绍了通过@Autowired或@Resource来实现在Bean中自动注入的功能,下面我们将介绍如何注解Bean,从而从XML配置文件中完全移除Bean定义的配置。
2.1. @Component(不推荐使用)、@Repository、@Service、@Controller
只需要在对应的类上加上一个@Component注解,就将该类定义为一个Bean了:
Java代码
@Component
public class UserDaoImpl extends HibernateDaoSupport implements UserDao {
...
}
@Component
public class UserDaoImpl extends HibernateDaoSupport implements UserDao {
...
}
使用@Component注解定义的Bean,默认的名称(id)是小写开头的非限定类名。如这里定义的Bean名称就是userDaoImpl。你也可以指定Bean的名称:
@Component("userDao")
@Component是所有受Spring管理组件的通用形式,Spring还提供了更加细化的注解形式:@Repository、@Service、@Controller,它们分别对应存储层Bean,业务层Bean,和展示层Bean。目前版本(2.5)中,这些注解与@Component的语义是一样的,完全通用,在Spring以后的版本中可能会给它们追加更多的语义。所以,我们推荐使用@Repository、@Service、@Controller来替代@Component。
2.2. 使用<context:component-scan />让Bean定义注解工作起来
Java代码
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<context:component-scan base-package="com.kedacom.ksoa" />
</beans>
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<context:component-scan base-package="com.kedacom.ksoa" />
</beans>
这里,所有通过<bean>元素定义Bean的配置内容已经被移除,仅需要添加一行<context:component-scan />配置就解决所有问题了——Spring XML配置文件得到了极致的简化(当然配置元数据还是需要的,只不过以注释形式存在罢了)。<context:component-scan />的base-package属性指定了需要扫描的类包,类包及其递归子包中所有的类都会被处理。
<context:component-scan />还允许定义过滤器将基包下的某些类纳入或排除。Spring支持以下4种类型的过滤方式:
过滤器类型 表达式范例 说明
注解 org.example.SomeAnnotation 将所有使用SomeAnnotation注解的类过滤出来
类名指定 org.example.SomeClass 过滤指定的类
正则表达式 com\.kedacom\.spring\.annotation\.web\..* 通过正则表达式过滤一些类
AspectJ表达式 org.example..*Service+ 通过AspectJ表达式过滤一些类
以正则表达式为例,我列举一个应用实例:
Java代码
<context:component-scan base-package="com.casheen.spring.annotation">
<context:exclude-filter type="regex" expression="com\.casheen\.spring\.annotation\.web\..*" />
</context:component-scan>
<context:component-scan base-package="com.casheen.spring.annotation">
<context:exclude-filter type="regex" expression="com\.casheen\.spring\.annotation\.web\..*" />
</context:component-scan>
值得注意的是<context:component-scan />配置项不但启用了对类包进行扫描以实施注释驱动Bean定义的功能,同时还启用了注释驱动自动注入的功能(即还隐式地在内部注册了AutowiredAnnotationBeanPostProcessor和CommonAnnotationBeanPostProcessor),因此当使用<context:component-scan />后,就可以将<context:annotation-config />移除了。
2.3. 使用@Scope来定义Bean的作用范围
在使用XML定义Bean时,我们可能还需要通过bean的scope属性来定义一个Bean的作用范围,我们同样可以通过@Scope注解来完成这项工作:
Java代码
@Scope("session")
@Component()
public class UserSessionBean implements Serializable {
...
}
@Scope("session")
@Component()
public class UserSessionBean implements Serializable {
...
}
3. 参考
http://kingtai168.javaeye.com/blog/244002
http://www.javaeye.com/topic/244153
http://static.springframework.org/spring/docs/2.5.x/reference/beans.html#beans-annotation-config
http://static.springframework.org/spring/docs/2.5.x/reference/beans.html#beans-classpath-scanning
事物管理:
一.spring配置文件
这里使用spring命名空间,如下:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xmlns:tx="http://www.springframework.org/schema/tx"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd
http://www.springframework.org/schema/tx
http://www.springframework.org/schema/tx/spring-tx-2.5.xsd"
default-autowire="byName" default-lazy-init="true">
<context:property-placeholder location="classpath:jdbc.properties" />
<bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource"
destroy-method="close">
<property name="driverClassName" value="${jdbc.driverClassName}" />
<property name="url" value="${jdbc.url}" />
<property name="username" value="${jdbc.username}" />
<property name="password" value="${jdbc.password}" />
<property name="initialSize" value="${jdbc.initialSize}" />
<property name="maxActive" value="${jdbc.maxActive}" />
<property name="maxIdle" value="${jdbc.maxIdle}" />
<property name="minIdle" value="${jdbc.minIdle}" />
<property name="maxWait" value="${jdbc.maxWait}" />
</bean>
<!-- 设定transactionManager -->
<bean id="transactionManager"
class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
<property name="dataSource" ref="dataSource" />
</bean>
<!--启动spring注解功能-->
<tx:annotation-driven transaction-manager="transactionManager" />
</beans>
说明:
1.如果事务管理器的id是transactionManager,这里可以不对transaction-manager进行配置,即<tx:annotation-driven />就可以。
2.这个配置是告诉spring在类(接口)层面或者方法层面上检查应用程序上下文中的所有标准了@Transactional的bean,spring将自动把事务通知的内容通知给它。
3.这个通知的事务参数将由@Transactional注释的参数来定义。
4.如果注释的是接口,则该接口的所有实现类都将被事务化。
二.使用@Transactional标注bean
package com.netqin.bbs.initUserData;
import org.springframework.transaction.annotation.Propagation;
import org.springframework.transaction.annotation.Transactional;
import com.netqin.bbs.initUserData.service.InitUserDataService;
import com.netqin.bbs.utils.Constant;
import com.netqin.bbs.utils.ReadFileUtil;
@Transactional(propagation=Propagation.SUPPORTS,readOnly=true)//设置默认的事务管理策略,即没有标注@Transactional的方法的事务处理方式,意思为不要求方法必须在一个事务中运行
public class InitUserData {
/**
* 描述 :使用方法上声明的事务管理策略,这里的意思为需要在一个事务中运行. <br>
*<p>
*/
@Transactional(propagation=Propagation.REQUIRED,readOnly=false)
public void method1(){
……………………
……………………
}
/**
* 描述 : 使用默认策略. <br>
*<p>
*/
public void method2(){
……………………
……………………
}
}
记得要将这个bean加入到spring上下文中。
一般来说,上述两种事务策略就可以满足要求了,不过需要注意,注解功能的使用需要在项目中加入cglib-nodep-x.x_x.jar
面向切面(AOP)
Spring AOP AOP中的概念
Aspect(切面):指横切性关注点的抽象即为切面,它与类相似,只是两者的关注点不一样,类是对物体特征的抽象,而切面是横切性关注点的抽象(包括切入点的描述和通知的描述)。
Joinpoint(连接点):所谓连接点是指那些被拦截到的点。在spring中,这些点指的是方法,
因为spring只支持方法型的连接点,实际上joinpoint还可以是field或者构造器。
Pointcut(切入点):所谓切入点是指我们要对那些joinpoint进行拦截的定义。
Advice(通知):所谓通知是指拦截到jointpoint之后所要做的事情就是通知。通知分为前置通知、后置通知、异常通知、最终通知、环绕通知。
Target(目标对象):代理的目标对象
Weave(织入): 指将aspects应用到target对象并导致proxy对象创建的过程称为织入
Introducton(引入):在不修改类代码的前提下,Introduction可以在运行期为类动态地添加一些方法或Field
Spring提供了两种切面使用方式,实际工作中我们可以选用其中一种:
1 基于xml配置方式进行AOP开发
2 基于注解方式进行AOP开发
(一)基于注解的方式
下面是基于注解的方式
Java代码
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:aop="http://www.springframework.org/schema/aop"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-2.5.xsd
http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.5.xsd">
<aop:aspectj-autoproxy/><!-- 启动对@AspectJ注解的支持 -->
</beans>
Java代码
import org.aspectj.lang.ProceedingJoinPoint;
import org.aspectj.lang.annotation.After;
import org.aspectj.lang.annotation.AfterReturning;
import org.aspectj.lang.annotation.AfterThrowing;
import org.aspectj.lang.annotation.Around;
import org.aspectj.lang.annotation.Aspect;
import org.aspectj.lang.annotation.Before;
import org.aspectj.lang.annotation.Pointcut;
import org.springframework.stereotype.Component;
@Aspect @Component
public class MyInterceptor {
/**
*@Pointcut :表示规定切入点
*execution() 语法规范
* 第一个“*”表示任意返回结果类型
* “cn.itcast.service.impl.PersonServiceBean”:表示对此类进行拦截,
* 如果是cn.itcast.service..*.*:表示对包cn.itcast.service以及子包里所
有的类的所有方法进行拦截,
* (..)表示参数
*/
@Pointcut("execution(* com.mingbai.springaop.PersonServiceBean.*(..))")
private void anyMethod(){}//声明一个切入点
/* @Before("anyMethod()")
public void doAccessCheck(){
System.out.println("前置通知");
}*/
//此时的前置通知,只能拦截到参数个数和类型匹配的方法
//args(name)中的name必须和方法doAccessCheck的参数一至
@Before("anyMethod() && args(name)")
public void doAccessCheck(String name){
System.out.println(name+"前置通知");
}
/* @AfterReturning("anyMethod()")
public void doAfterReturn(){
System.out.println("后置通知");
}*/
//得到方法的返回值
@AfterReturning(pointcut="anyMethod()",returning="result")
public void doAfterReturn(String result){
System.out.println("后置通知 "+result);
}
@After("anyMethod()")
public void doAfter(){
System.out.println("最终通知");
}
/* @AfterThrowing("anyMethod()")
public void doAfterThrow(){
System.out.println("异常通知");
}*/
@AfterThrowing(pointcut="anyMethod()",throwing="e")
public void doAfterThrow(Exception e){
System.out.println("异常通知------"+e.getMessage());
}
@Around("anyMethod()")
public Object doBasicProfiling(ProceedingJoinPoint pjp) throws Throwable{
System.out.println("环绕通知 开始");
Object obj = pjp.proceed();
System.out.println("环绕通知 结束");
return obj;
}
}
(二)基于xml配置文件的
切面只是一个普通的javabean
Java代码
import org.aspectj.lang.ProceedingJoinPoint;
public class MyInterceptor1 {
public void doAccessCheck(){
System.out.println("前置通知-------");
}
public void doAfterReturn(){
System.out.println("后置通知");
}
public void doAfter(){
System.out.println("最终通知");
}
public void doAfterThrow(){
System.out.println("异常通知");
}
public Object doBasicProfiling(ProceedingJoinPoint pjp) throws Throwable{
System.out.println("环绕通知 开始");
Object obj = pjp.proceed();
System.out.println("环绕通知 结束");
return obj;
}
} 配置文件 :
Java代码
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:tx="http://www.springframework.org/schema/tx"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-2.5.xsd
http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.5.xsd
http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.5.xsd">
[color=brown] <bean id="per" class="com.mingbai.springaop.PersonServiceBean"/>
<bean id="myInterceptor" class="com.mingbai.springaop.MyInterceptor1"/>
<!--
<aop:config>
<aop:aspect id="asp" ref="myInterceptor">
<aop:pointcut id="mycut" expression="execution(* com.mingbai.springaop.*.*(..))"/>
<aop:before pointcut-ref="mycut" method="doAccessCheck"/>
<aop:after-returning pointcut-ref="mycut" method="doAfterReturn"/>
<aop:after pointcut-ref="mycut" method="doAfter"/>
<aop:after-throwing pointcut-ref="mycut" method="doAfterThrow"/>
<aop:around pointcut-ref="mycut" method="doBasicProfiling"/>
</aop:aspect>
</aop:config>[/color]
-->
<!-- 只是拦截返回类型为java.lang.String的方法
<aop:config>
<aop:aspect id="asp" ref="myInterceptor">
<aop:pointcut id="mycut" expression="execution(java.lang.String com.mingbai.springaop.*.*(..))"/>
<aop:before pointcut-ref="mycut" method="doAccessCheck"/>
<aop:after-returning pointcut-ref="mycut" method="doAfterReturn"/>
<aop:after pointcut-ref="mycut" method="doAfter"/>
<aop:after-throwing pointcut-ref="mycut" method="doAfterThrow"/>
<aop:around pointcut-ref="mycut" method="doBasicProfiling"/>
</aop:aspect>
</aop:config>
-->
<!-- 返回非void的方法 -->
<aop:config>
<aop:aspect id="asp" ref="myInterceptor">
<aop:pointcut id="mycut" expression="execution(!void com.mingbai.springaop.*.*(..))"/>
<aop:before pointcut-ref="mycut" method="doAccessCheck"/>
<aop:after-returning pointcut-ref="mycut" method="doAfterReturn"/>
<aop:after pointcut-ref="mycut" method="doAfter"/>
<aop:after-throwing pointcut-ref="mycut" method="doAfterThrow"/>
<aop:around pointcut-ref="mycut" method="doBasicProfiling"/>
</aop:aspect>
</aop:config>
<!-- 匹配第一个参数为java.lang.String,其它的无所谓
<aop:config>
<aop:aspect id="asp" ref="myInterceptor">
<aop:pointcut id="mycut" expression="execution(* com.mingbai.springaop.*.*(..))"/>
<aop:before pointcut-ref="mycut" method="doAccessCheck"/>
<aop:after-returning pointcut-ref="mycut" method="doAfterReturn"/>
<aop:after pointcut-ref="mycut" method="doAfter"/>
<aop:after-throwing pointcut-ref="mycut" method="doAfterThrow"/>
<aop:around pointcut-ref="mycut" method="doBasicProfiling"/>
</aop:aspect>
</aop:config>
-->
</beans>
1. 使用Spring注解来注入属性
1.1. 使用注解以前我们是怎样注入属性的
类的实现:
Java代码
public class UserManagerImpl implements UserManager {
private UserDao userDao;
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
...
}
public class UserManagerImpl implements UserManager {
private UserDao userDao;
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
...
}
配置文件:
Java代码
<bean id="userManagerImpl" class="com.kedacom.spring.annotation.service.UserManagerImpl">
<property name="userDao" ref="userDao" />
</bean>
<bean id="userDao" class="com.kedacom.spring.annotation.persistence.UserDaoImpl">
<property name="sessionFactory" ref="mySessionFactory" />
</bean>
<bean id="userManagerImpl" class="com.kedacom.spring.annotation.service.UserManagerImpl">
<property name="userDao" ref="userDao" />
</bean>
<bean id="userDao" class="com.kedacom.spring.annotation.persistence.UserDaoImpl">
<property name="sessionFactory" ref="mySessionFactory" />
</bean>
1.2. 引入@Autowired注解(不推荐使用,建议使用@Resource)
类的实现(对成员变量进行标注)
Java代码
public class UserManagerImpl implements UserManager {
@Autowired
private UserDao userDao;
...
}
public class UserManagerImpl implements UserManager {
@Autowired
private UserDao userDao;
...
}
或者(对方法进行标注)
Java代码
public class UserManagerImpl implements UserManager {
private UserDao userDao;
@Autowired
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
...
}
public class UserManagerImpl implements UserManager {
private UserDao userDao;
@Autowired
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
...
}
配置文件
Java代码
<bean id="userManagerImpl" class="com.kedacom.spring.annotation.service.UserManagerImpl" />
<bean id="userDao" class="com.kedacom.spring.annotation.persistence.UserDaoImpl">
<property name="sessionFactory" ref="mySessionFactory" />
</bean>
<bean id="userManagerImpl" class="com.kedacom.spring.annotation.service.UserManagerImpl" />
<bean id="userDao" class="com.kedacom.spring.annotation.persistence.UserDaoImpl">
<property name="sessionFactory" ref="mySessionFactory" />
</bean>
@Autowired可以对成员变量、方法和构造函数进行标注,来完成自动装配的工作。以上两种不同实现方式中,@Autowired的标注位置不同,它们都会在Spring在初始化userManagerImpl这个bean时,自动装配userDao这个属性,区别是:第一种实现中,Spring会直接将UserDao类型的唯一一个bean赋值给userDao这个成员变量;第二种实现中,Spring会调用setUserDao方法来将UserDao类型的唯一一个bean装配到userDao这个属性。
1.3. 让@Autowired工作起来
要使@Autowired能够工作,还需要在配置文件中加入以下代码
Java代码
<bean class="org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor" />
<bean class="org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor" />
1.4. @Qualifier
@Autowired是根据类型进行自动装配的。在上面的例子中,如果当Spring上下文中存在不止一个UserDao类型的bean时,就会抛出BeanCreationException异常;如果Spring上下文中不存在UserDao类型的bean,也会抛出BeanCreationException异常。我们可以使用@Qualifier配合@Autowired来解决这些问题。
1. 可能存在多个UserDao实例
Java代码
@Autowired
public void setUserDao(@Qualifier("userDao") UserDao userDao) {
this.userDao = userDao;
}
@Autowired
public void setUserDao(@Qualifier("userDao") UserDao userDao) {
this.userDao = userDao;
}
这样,Spring会找到id为userDao的bean进行装配。
2. 可能不存在UserDao实例
Java代码
@Autowired(required = false)
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
@Autowired(required = false)
public void setUserDao(UserDao userDao) {
this.userDao = userDao;
}
1.5. @Resource(JSR-250标准注解,推荐使用它来代替Spring专有的@Autowired注解)
Spring 不但支持自己定义的@Autowired注解,还支持几个由JSR-250规范定义的注解,它们分别是@Resource、@PostConstruct以及@PreDestroy。
@Resource的作用相当于@Autowired,只不过@Autowired按byType自动注入,而@Resource默认按byName自动注入罢了。@Resource有两个属性是比较重要的,分别是name和type,Spring将@Resource注解的name属性解析为bean的名字,而type属性则解析为bean的类型。所以如果使用name属性,则使用byName的自动注入策略,而使用type属性时则使用byType自动注入策略。如果既不指定name也不指定type属性,这时将通过反射机制使用byName自动注入策略。
@Resource装配顺序
如果同时指定了name和type,则从Spring上下文中找到唯一匹配的bean进行装配,找不到则抛出异常
如果指定了name,则从上下文中查找名称(id)匹配的bean进行装配,找不到则抛出异常
如果指定了type,则从上下文中找到类型匹配的唯一bean进行装配,找不到或者找到多个,都会抛出异常
如果既没有指定name,又没有指定type,则自动按照byName方式进行装配(见2);如果没有匹配,则回退为一个原始类型(UserDao)进行匹配,如果匹配则自动装配;
1.6. @PostConstruct(JSR-250)
在方法上加上注解@PostConstruct,这个方法就会在Bean初始化之后被Spring容器执行(注:Bean初始化包括,实例化Bean,并装配Bean的属性(依赖注入))。
它的一个典型的应用场景是,当你需要往Bean里注入一个其父类中定义的属性,而你又无法复写父类的属性或属性的setter方法时,如:
Java代码
public class UserDaoImpl extends HibernateDaoSupport implements UserDao {
private SessionFactory mySessionFacotry;
@Resource
public void setMySessionFacotry(SessionFactory sessionFacotry) {
this.mySessionFacotry = sessionFacotry;
}
@PostConstruct
public void injectSessionFactory() {
super.setSessionFactory(mySessionFacotry);
}
...
}
public class UserDaoImpl extends HibernateDaoSupport implements UserDao {
private SessionFactory mySessionFacotry;
@Resource
public void setMySessionFacotry(SessionFactory sessionFacotry) {
this.mySessionFacotry = sessionFacotry;
}
@PostConstruct
public void injectSessionFactory() {
super.setSessionFactory(mySessionFacotry);
}
...
}
这里通过@PostConstruct,为UserDaoImpl的父类里定义的一个sessionFactory私有属性,注入了我们自己定义的sessionFactory(父类的setSessionFactory方法为final,不可复写),之后我们就可以通过调用super.getSessionFactory()来访问该属性了。
1.7. @PreDestroy(JSR-250)
在方法上加上注解@PreDestroy,这个方法就会在Bean初始化之后被Spring容器执行。由于我们当前还没有需要用到它的场景,这里不不去演示。其用法同@PostConstruct。
1.8. 使用<context:annotation-config />简化配置
Spring2.1添加了一个新的context的Schema命名空间,该命名空间对注释驱动、属性文件引入、加载期织入等功能提供了便捷的配置。我们知道注释本身是不会做任何事情的,它仅提供元数据信息。要使元数据信息真正起作用,必须让负责处理这些元数据的处理器工作起来。
AutowiredAnnotationBeanPostProcessor和CommonAnnotationBeanPostProcessor就是处理这些注释元数据的处理器。但是直接在Spring配置文件中定义这些Bean显得比较笨拙。Spring为我们提供了一种方便的注册这些BeanPostProcessor的方式,这就是<context:annotation-config />:
Java代码
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<context:annotation-config />
</beans>
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<context:annotation-config />
</beans>
<context:annotationconfig />将隐式地向Spring容器注册AutowiredAnnotationBeanPostProcessor、CommonAnnotationBeanPostProcessor、 PersistenceAnnotationBeanPostProcessor以及RequiredAnnotationBeanPostProcessor这4个BeanPostProcessor。
2. 使用Spring注解完成Bean的定义
以上我们介绍了通过@Autowired或@Resource来实现在Bean中自动注入的功能,下面我们将介绍如何注解Bean,从而从XML配置文件中完全移除Bean定义的配置。
2.1. @Component(不推荐使用)、@Repository、@Service、@Controller
只需要在对应的类上加上一个@Component注解,就将该类定义为一个Bean了:
Java代码
@Component
public class UserDaoImpl extends HibernateDaoSupport implements UserDao {
...
}
@Component
public class UserDaoImpl extends HibernateDaoSupport implements UserDao {
...
}
使用@Component注解定义的Bean,默认的名称(id)是小写开头的非限定类名。如这里定义的Bean名称就是userDaoImpl。你也可以指定Bean的名称:
@Component("userDao")
@Component是所有受Spring管理组件的通用形式,Spring还提供了更加细化的注解形式:@Repository、@Service、@Controller,它们分别对应存储层Bean,业务层Bean,和展示层Bean。目前版本(2.5)中,这些注解与@Component的语义是一样的,完全通用,在Spring以后的版本中可能会给它们追加更多的语义。所以,我们推荐使用@Repository、@Service、@Controller来替代@Component。
2.2. 使用<context:component-scan />让Bean定义注解工作起来
Java代码
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<context:component-scan base-package="com.kedacom.ksoa" />
</beans>
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<context:component-scan base-package="com.kedacom.ksoa" />
</beans>
这里,所有通过<bean>元素定义Bean的配置内容已经被移除,仅需要添加一行<context:component-scan />配置就解决所有问题了——Spring XML配置文件得到了极致的简化(当然配置元数据还是需要的,只不过以注释形式存在罢了)。<context:component-scan />的base-package属性指定了需要扫描的类包,类包及其递归子包中所有的类都会被处理。
<context:component-scan />还允许定义过滤器将基包下的某些类纳入或排除。Spring支持以下4种类型的过滤方式:
过滤器类型 表达式范例 说明
注解 org.example.SomeAnnotation 将所有使用SomeAnnotation注解的类过滤出来
类名指定 org.example.SomeClass 过滤指定的类
正则表达式 com\.kedacom\.spring\.annotation\.web\..* 通过正则表达式过滤一些类
AspectJ表达式 org.example..*Service+ 通过AspectJ表达式过滤一些类
以正则表达式为例,我列举一个应用实例:
Java代码
<context:component-scan base-package="com.casheen.spring.annotation">
<context:exclude-filter type="regex" expression="com\.casheen\.spring\.annotation\.web\..*" />
</context:component-scan>
<context:component-scan base-package="com.casheen.spring.annotation">
<context:exclude-filter type="regex" expression="com\.casheen\.spring\.annotation\.web\..*" />
</context:component-scan>
值得注意的是<context:component-scan />配置项不但启用了对类包进行扫描以实施注释驱动Bean定义的功能,同时还启用了注释驱动自动注入的功能(即还隐式地在内部注册了AutowiredAnnotationBeanPostProcessor和CommonAnnotationBeanPostProcessor),因此当使用<context:component-scan />后,就可以将<context:annotation-config />移除了。
2.3. 使用@Scope来定义Bean的作用范围
在使用XML定义Bean时,我们可能还需要通过bean的scope属性来定义一个Bean的作用范围,我们同样可以通过@Scope注解来完成这项工作:
Java代码
@Scope("session")
@Component()
public class UserSessionBean implements Serializable {
...
}
@Scope("session")
@Component()
public class UserSessionBean implements Serializable {
...
}
3. 参考
http://kingtai168.javaeye.com/blog/244002
http://www.javaeye.com/topic/244153
http://static.springframework.org/spring/docs/2.5.x/reference/beans.html#beans-annotation-config
http://static.springframework.org/spring/docs/2.5.x/reference/beans.html#beans-classpath-scanning
事物管理:
一.spring配置文件
这里使用spring命名空间,如下:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context"
xmlns:tx="http://www.springframework.org/schema/tx"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-2.5.xsd
http://www.springframework.org/schema/tx
http://www.springframework.org/schema/tx/spring-tx-2.5.xsd"
default-autowire="byName" default-lazy-init="true">
<context:property-placeholder location="classpath:jdbc.properties" />
<bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource"
destroy-method="close">
<property name="driverClassName" value="${jdbc.driverClassName}" />
<property name="url" value="${jdbc.url}" />
<property name="username" value="${jdbc.username}" />
<property name="password" value="${jdbc.password}" />
<property name="initialSize" value="${jdbc.initialSize}" />
<property name="maxActive" value="${jdbc.maxActive}" />
<property name="maxIdle" value="${jdbc.maxIdle}" />
<property name="minIdle" value="${jdbc.minIdle}" />
<property name="maxWait" value="${jdbc.maxWait}" />
</bean>
<!-- 设定transactionManager -->
<bean id="transactionManager"
class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
<property name="dataSource" ref="dataSource" />
</bean>
<!--启动spring注解功能-->
<tx:annotation-driven transaction-manager="transactionManager" />
</beans>
说明:
1.如果事务管理器的id是transactionManager,这里可以不对transaction-manager进行配置,即<tx:annotation-driven />就可以。
2.这个配置是告诉spring在类(接口)层面或者方法层面上检查应用程序上下文中的所有标准了@Transactional的bean,spring将自动把事务通知的内容通知给它。
3.这个通知的事务参数将由@Transactional注释的参数来定义。
4.如果注释的是接口,则该接口的所有实现类都将被事务化。
二.使用@Transactional标注bean
package com.netqin.bbs.initUserData;
import org.springframework.transaction.annotation.Propagation;
import org.springframework.transaction.annotation.Transactional;
import com.netqin.bbs.initUserData.service.InitUserDataService;
import com.netqin.bbs.utils.Constant;
import com.netqin.bbs.utils.ReadFileUtil;
@Transactional(propagation=Propagation.SUPPORTS,readOnly=true)//设置默认的事务管理策略,即没有标注@Transactional的方法的事务处理方式,意思为不要求方法必须在一个事务中运行
public class InitUserData {
/**
* 描述 :使用方法上声明的事务管理策略,这里的意思为需要在一个事务中运行. <br>
*<p>
*/
@Transactional(propagation=Propagation.REQUIRED,readOnly=false)
public void method1(){
……………………
……………………
}
/**
* 描述 : 使用默认策略. <br>
*<p>
*/
public void method2(){
……………………
……………………
}
}
记得要将这个bean加入到spring上下文中。
一般来说,上述两种事务策略就可以满足要求了,不过需要注意,注解功能的使用需要在项目中加入cglib-nodep-x.x_x.jar
面向切面(AOP)
Spring AOP AOP中的概念
Aspect(切面):指横切性关注点的抽象即为切面,它与类相似,只是两者的关注点不一样,类是对物体特征的抽象,而切面是横切性关注点的抽象(包括切入点的描述和通知的描述)。
Joinpoint(连接点):所谓连接点是指那些被拦截到的点。在spring中,这些点指的是方法,
因为spring只支持方法型的连接点,实际上joinpoint还可以是field或者构造器。
Pointcut(切入点):所谓切入点是指我们要对那些joinpoint进行拦截的定义。
Advice(通知):所谓通知是指拦截到jointpoint之后所要做的事情就是通知。通知分为前置通知、后置通知、异常通知、最终通知、环绕通知。
Target(目标对象):代理的目标对象
Weave(织入): 指将aspects应用到target对象并导致proxy对象创建的过程称为织入
Introducton(引入):在不修改类代码的前提下,Introduction可以在运行期为类动态地添加一些方法或Field
Spring提供了两种切面使用方式,实际工作中我们可以选用其中一种:
1 基于xml配置方式进行AOP开发
2 基于注解方式进行AOP开发
(一)基于注解的方式
下面是基于注解的方式
Java代码
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:aop="http://www.springframework.org/schema/aop"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-2.5.xsd
http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.5.xsd">
<aop:aspectj-autoproxy/><!-- 启动对@AspectJ注解的支持 -->
</beans>
Java代码
import org.aspectj.lang.ProceedingJoinPoint;
import org.aspectj.lang.annotation.After;
import org.aspectj.lang.annotation.AfterReturning;
import org.aspectj.lang.annotation.AfterThrowing;
import org.aspectj.lang.annotation.Around;
import org.aspectj.lang.annotation.Aspect;
import org.aspectj.lang.annotation.Before;
import org.aspectj.lang.annotation.Pointcut;
import org.springframework.stereotype.Component;
@Aspect @Component
public class MyInterceptor {
/**
*@Pointcut :表示规定切入点
*execution() 语法规范
* 第一个“*”表示任意返回结果类型
* “cn.itcast.service.impl.PersonServiceBean”:表示对此类进行拦截,
* 如果是cn.itcast.service..*.*:表示对包cn.itcast.service以及子包里所
有的类的所有方法进行拦截,
* (..)表示参数
*/
@Pointcut("execution(* com.mingbai.springaop.PersonServiceBean.*(..))")
private void anyMethod(){}//声明一个切入点
/* @Before("anyMethod()")
public void doAccessCheck(){
System.out.println("前置通知");
}*/
//此时的前置通知,只能拦截到参数个数和类型匹配的方法
//args(name)中的name必须和方法doAccessCheck的参数一至
@Before("anyMethod() && args(name)")
public void doAccessCheck(String name){
System.out.println(name+"前置通知");
}
/* @AfterReturning("anyMethod()")
public void doAfterReturn(){
System.out.println("后置通知");
}*/
//得到方法的返回值
@AfterReturning(pointcut="anyMethod()",returning="result")
public void doAfterReturn(String result){
System.out.println("后置通知 "+result);
}
@After("anyMethod()")
public void doAfter(){
System.out.println("最终通知");
}
/* @AfterThrowing("anyMethod()")
public void doAfterThrow(){
System.out.println("异常通知");
}*/
@AfterThrowing(pointcut="anyMethod()",throwing="e")
public void doAfterThrow(Exception e){
System.out.println("异常通知------"+e.getMessage());
}
@Around("anyMethod()")
public Object doBasicProfiling(ProceedingJoinPoint pjp) throws Throwable{
System.out.println("环绕通知 开始");
Object obj = pjp.proceed();
System.out.println("环绕通知 结束");
return obj;
}
}
(二)基于xml配置文件的
切面只是一个普通的javabean
Java代码
import org.aspectj.lang.ProceedingJoinPoint;
public class MyInterceptor1 {
public void doAccessCheck(){
System.out.println("前置通知-------");
}
public void doAfterReturn(){
System.out.println("后置通知");
}
public void doAfter(){
System.out.println("最终通知");
}
public void doAfterThrow(){
System.out.println("异常通知");
}
public Object doBasicProfiling(ProceedingJoinPoint pjp) throws Throwable{
System.out.println("环绕通知 开始");
Object obj = pjp.proceed();
System.out.println("环绕通知 结束");
return obj;
}
} 配置文件 :
Java代码
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:tx="http://www.springframework.org/schema/tx"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-2.5.xsd
http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.5.xsd
http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.5.xsd">
[color=brown] <bean id="per" class="com.mingbai.springaop.PersonServiceBean"/>
<bean id="myInterceptor" class="com.mingbai.springaop.MyInterceptor1"/>
<!--
<aop:config>
<aop:aspect id="asp" ref="myInterceptor">
<aop:pointcut id="mycut" expression="execution(* com.mingbai.springaop.*.*(..))"/>
<aop:before pointcut-ref="mycut" method="doAccessCheck"/>
<aop:after-returning pointcut-ref="mycut" method="doAfterReturn"/>
<aop:after pointcut-ref="mycut" method="doAfter"/>
<aop:after-throwing pointcut-ref="mycut" method="doAfterThrow"/>
<aop:around pointcut-ref="mycut" method="doBasicProfiling"/>
</aop:aspect>
</aop:config>[/color]
-->
<!-- 只是拦截返回类型为java.lang.String的方法
<aop:config>
<aop:aspect id="asp" ref="myInterceptor">
<aop:pointcut id="mycut" expression="execution(java.lang.String com.mingbai.springaop.*.*(..))"/>
<aop:before pointcut-ref="mycut" method="doAccessCheck"/>
<aop:after-returning pointcut-ref="mycut" method="doAfterReturn"/>
<aop:after pointcut-ref="mycut" method="doAfter"/>
<aop:after-throwing pointcut-ref="mycut" method="doAfterThrow"/>
<aop:around pointcut-ref="mycut" method="doBasicProfiling"/>
</aop:aspect>
</aop:config>
-->
<!-- 返回非void的方法 -->
<aop:config>
<aop:aspect id="asp" ref="myInterceptor">
<aop:pointcut id="mycut" expression="execution(!void com.mingbai.springaop.*.*(..))"/>
<aop:before pointcut-ref="mycut" method="doAccessCheck"/>
<aop:after-returning pointcut-ref="mycut" method="doAfterReturn"/>
<aop:after pointcut-ref="mycut" method="doAfter"/>
<aop:after-throwing pointcut-ref="mycut" method="doAfterThrow"/>
<aop:around pointcut-ref="mycut" method="doBasicProfiling"/>
</aop:aspect>
</aop:config>
<!-- 匹配第一个参数为java.lang.String,其它的无所谓
<aop:config>
<aop:aspect id="asp" ref="myInterceptor">
<aop:pointcut id="mycut" expression="execution(* com.mingbai.springaop.*.*(..))"/>
<aop:before pointcut-ref="mycut" method="doAccessCheck"/>
<aop:after-returning pointcut-ref="mycut" method="doAfterReturn"/>
<aop:after pointcut-ref="mycut" method="doAfter"/>
<aop:after-throwing pointcut-ref="mycut" method="doAfterThrow"/>
<aop:around pointcut-ref="mycut" method="doBasicProfiling"/>
</aop:aspect>
</aop:config>
-->
</beans>